This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 86.1(g)(2) | SAE J-1349 | 2011 | Engine Power Test Code—Spark Ignition and Compression Ignition—As Installed Net Power Rating | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.174(b)(1) | Drawing No. SA-572-T4 | 2011 | Chest deflection transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.174(b)(1) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.10(d)(1) | ILO Publication | 2011 | Guidelines for the Use of the ILO International Classification of Radiographs of Pneumoconioses | International Labor Organization | |
Coast Guard | 40 CFR 1065.720 Table 1 | ASTM D 1837 | 2011 | Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(a) | ASTM D 7430 | 2011 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 435.15 Note 10 | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 85 FR 78412 | 40 CFR 79 | ASTM D4052–11 | 2011 | Fuels Regulatory Streamlining | ASTM International |
Environmental Protection Agency | 40 CFR 1065.1010(b)(13) | ASTM D 1837 | 2011 | Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(ii) | Drawing No. 420-1000 | 2011 | Head Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(a)(3) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.42(i)(5)(i)(B) | DICOM Standard PS 3.4-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 4: Service Class Specifications | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(d) | ASTM D 5864 | 2011 | Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components | ASTM International | |
Energy Department | 87 FR 53618 | 10 CFR 429 | ANSI C78.21–2011 (R2016) | 2011 | Energy Conservation Program: Test Procedures for General Service Fluorescent Lamps, Incandescent Reflector Lamps, and General Service Incandescent Lamps | American National Standards Institute |
Environmental Protection Agency | 40 CFR 435.13 Note 11 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 69 | EPA Method 1627 | 2011 | Kinetic Test Method for the Prediction of Mine Drainage Quality, EPA-821-R-09-002 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(23) | ASTM D 2784 | 2011 | Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (ii) | Drawing No. 420-2000 | 2011 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(4) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Federal Motor Carrier Safety Administration | 49 CFR 384.231(d) | CDLIS | 2011 | Commercial Driver's License Information System (CDLIS) State Procedures Manual, Release 5.2.0 | American Association of Motor Vehicle Administrators, Inc. | |
Energy Department | 87 FR 50396 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Ceiling Fans | International Electrotechnical Commission |
National Highway Traffic Safety Administration | 49 CFR 572.173(b) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(9) | Drawing No. 420-5100 | 2011 | Upper leg assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | IEEE 1584b | 2011 | Amendment 2: Changes to Clause 4 of IEEE Std 1584-2002, IEEE Guide for Performing Arc-Flash Hazard Calculations | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(e) | ASTM D 4057 | 2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.200(b)(1) | ANSI Z535.2 | 2011 | Environmental and Facility Safety Signs | American National Standards Institute | |
Agriculture Department | 86 FR 57015 | 7 CFR 1728 | RUS Bulletin 1728H–701 | 2011 | Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service Electric and Telecommunications Borrowers | Rural Utilities Service, U.S. Department of Agriculture |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(e) | ASTM D 4057 | 2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Federal Communications Commission | 88 FR 30654 | 47 CFR 74 | ATSC A/53 Part 2 | 2011 | Establishing Rules for Digital Low Power Television and Television Translator Stations | Advanced Television Systems Committee |
Homeland Security Department | 88 FR 16310 | 46 CFR 110 | IEEE 45.2–2011 | 2011 | Update to Electrical Engineering Regulations | Institute of Electrical and Electronics Engineers |
Environmental Protection Agency | 40 CFR 435.15 Note 10 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(g)(22) | SAE J-2064 | 2011 | R134a Refrigerant Automotive Air-Conditioned Hose | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(iii) | Drawing No. 420-2000 | 2011 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.42(i)(5)(i)(C) | DICOM Standard PS 3.10-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 10: Media Storage and File Format for Media Interchange | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 435.15 Note 11 | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.41(m)(2) | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Energy Department | 87 FR 53618 | 10 CFR 430 | ANSI C78.21–2011 (R2016) | 2011 | Energy Conservation Program: Test Procedures for General Service Fluorescent Lamps, Incandescent Reflector Lamps, and General Service Incandescent Lamps | American National Standards Institute |
Environmental Protection Agency | 40 CFR 435.15 Note 11 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (iii) | Drawing No. 420-3000 | 2011 | Upper Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(4) | Drawing No. 420-8000 | 2011 | Spine box assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.50(a) | ILO Publication | 2011 | Guidelines for the Use of the ILO International Classification of Radiographs of Pneumoconioses | International Labor Organization | |
Energy Department | 88 FR 66152 | 10 CFR 431 | ANSI/AHRI 1320–2011 (I– P) | 2011 | Energy Conservation Program: Test Procedure for Commercial Refrigerators, Refrigerator-Freezers, and Freezers | Air Conditioning, Heating, and Refrigeration Institute |
Environmental Protection Agency | 40 CFR 435.11(hh) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.173(b) | Drawing No. 420-2070 | 2011 | Lower neck bracket assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63.7575 Biodiesel | ASTM D 6751 | 2011 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(f) | ASTM D 3683 | 2011 | Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption | ASTM International | |
Coast Guard | 45 CFR 162.1203(a)(5) | CAQH Publication | 2011 | Phase I CORE 156: Eligibility and Benefits Real Time Response Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 435.13 Note 11(a) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Federal Communications Commission | 86 FR 23614 | 47 CFR 20 | ANSI C63.19–2011 | 2011 | Standards for Hearing Aid-Compatible Handsets | American National Standards Institute |
Environmental Protection Agency | 85 FR 78412 | 40 CFR 80 | ASTM D4052–11 | 2011 | Fuels Regulatory Streamlining | ASTM International |