This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 147.100(a)(1) | AKUIC regulations | 1984 | Alaska Statutes, Alaska Oil and Gas Conservation Act, Title 31, §§ 31.05.005 through 31.30.010 (1979 and Cum. Supp. 1984) | State of Alaska | |
Rural Utilities Service | 7 CFR 1755.405(c)(5) | ANSI T1.506 | 1990 | Specifications for Switched Exchange Access Network | American National Standards Institute | |
Coast Guard | 46 CFR 108.649(f) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-saving Appliances and Arrangements | International Maritime Organization | |
Energy Department | 10 CFR 431 Subpart B, App. B, 2 | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.75(d)(3)(iii) | ISO 9809-3 | 2000 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 3: Normalized Steel Cylinders | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 4500-Cl F | 2000 | Chlorine, DPD Ferrous Titrimetric | American Public Health Association | |
Coast Guard | 46 CFR 161.002-4(b)(1) | IEC 533 | 1977 | Electromagnetic Compatibility of Electrical and Electronic Installations in Ships | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.5.1 | ASME MFC-5M | 1985 | Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200.926(d)(1)(i)(B)(2) | CABO 1 & 2 Family Code | 1992 | One and Two Family Dwelling Code with Errata Package and 1993 Amendments | Council of American Building Officials | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(2)(ii) | ASTM D 2471 | 1999 | Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (30) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Sulfate) | APHA Method 4110 B | 1992 | Anions by Ion Chromatography with Chemical Suppression of Eluent | American Public Health Association | |
Coast Guard | 46 CFR 160.077-21(c)(1) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(3) | Drawing No. SA-572-S41 | 1994 | Clavicle force transducers | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 141.25(a) Table Note 5 | APHA Standard Methods, 17th Edition | 1989 | Standard Methods for the Examination of Water and Wastewater, 17th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.107a(d)(7)(i) | ASTM D 240 | 2007 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(3) | API 12D | 1957 | Specification for Large Welded Production Tanks | American Petroleum Institute | |
Mine Safety and Health Administration | 30 CFR 75.333(e)(1)(i) | ASTM E 72 | 1980 | Standard Test Methods of Conducting Strength Tests of Panels for Building Construction | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(6) | Drawing No. SA-SID-M081 | 1987 | Leg Assembly, Left | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 58 Appendix E, 12.0(17) | EPA-600-1-78-055 | 1978 | Epidemiologic Study of the Effects of Automobile Traffic on Blood Lead Levels, Johnson, D. E., et al. | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.1502(a)(1) | ACGIH Publication | 1998 | Industrial Ventilation Manual: A Manual of Recommended Practice, 23rd Edition, Chapters 3 and 5 | American Conference of Governmental Industrial Hygienists | |
Minerals Management Service | 30 CFR 250.901(d)(13) | AWS D1.4 | 1998 | Structural Welding Code--Reinforcing Steel | American Welding Society | |
Coast Guard | 46 CFR 111.70-3(a) | IEC 92-201 | 1994 | Electrical Installation in Ships, Part 201: System Design-General, Fourth Edition | International Electrotechnical Commission | |
Research and Special Programs Administration | 21 CFR 176.170(a)(5) | ASTM D 36 | 1976 | Standard Test Method for Softening Point of Asphalts and Tar Pitches (Ring and Ball Apparatus) | ASTM International | |
Coast Guard | 46 CFR 56.01-2(l)(1) | SAE J-1475 | 1996 | Surface Vehicle Hydraulic Hose Fittings for Marine Applications | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 89.207(b) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Coast Guard | 46 CFR 58.03-1(g)(1) | ASTM A 193/A 193M | 1998 | Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service | ASTM International | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (23) | APHA Method 4500-CN D | 1999 | Cyanide by Titrimetric Method | American Public Health Association | |
Coast Guard | 46 CFR 184.200 | ABYC A-3 | 1993 | Recommended Practices and Standards Covering Galley Stoves | American Boat and Yacht Council | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.7(c)(2) G1 | PPI TR-3 | 2004 | Policies and Procedures for Developing Hydrostatic Design Basis (HDB), Pressure Design Basis (PDB), Strength Design Basis (SDB), and Minimum Required Strength (MRS) Ratings for Thermoplastic Piping Materials or Pipe | Plastics Pipe Institute, Inc. | |
Food and Drug Administration | 21 CFR 172.869(b)(10) | Food Chemicals Codex | 1997 | Sucrose Fatty Acid Esters | National Academy Press | |
Public Health Service | 42 CFR 84.141(c) | CGA G-7.1 | 1966 | Commodity Specification for Air | Compressed Gas Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(30) | SAE J-902a | 1967 | Passenger Car Windshield Defrosting Systems | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (41) | EPA Method 608 | 1982 | Organochlorine Pesticides & PCBs by GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (11) Conductivity | APHA Method 2510 B | 1995 | Conductivity, Laboratory Method | American Public Health Association | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(3)(i) | ASME OM Code | 1995 | Code for Operation and Maintenance of Nuclear Power Plants, ISTC 4.2, 1995 Edition with the 1996 and 1997 Addenda, or ISTC-3500, 1998 Edition through the latest edition and addenda | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM F 819 | 2010 | Standard Terminology Relating to Electrical Protective Equipment for Workers | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (44) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 16 | Colilert® Method | 2013 | Colilert Test Kit | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 435.41(k) | ASTM D 975 | 1991 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 85.2122(a)(8)(ii)(B) | SAE J-549A | 1979 | Preignition Rating of Spark Plugs | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(G)(3)(ii) | EPA-600-4-79-020 | 1983 | Method 375.1--Colorimetric, Automated, Chloromilate | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.269(j)(1)(iii) Note | ASTM F 711 | 1989 | Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live-Line Tools | ASTM International | |
Environmental Protection Agency | 40 CFR 147.1850(b)(2) | OKUIC regulations | 1973 | Oklahoma Statutes Annotated title 63 sections 1-101 to 1-114, 1-901 to 1-911, 1-1601 et seq., 1-1701, 1-2001 to 1-2014 (West 1973 and Supp. 1982) | State of Oklahoma | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUUU, Table 1, (5)(c) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Energy Department | 10 CFR 434.402.1.1 | ASTM C 518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus (RS-6) | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM E 330 | 1990 | Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(i)(2) | 35 I.A.C. 215, Subpart Q | 1989 | Sections 215.430, 215.431, 215.433, 215.434, 215.435, and 215.437 | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.860(b)(2) | ASTM E 8 | 1991 | Standard Test Method of Tension Testing of Metallic Materials | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.201-5(a) | ASTM A 240/A 240M | 1999 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels | ASTM International |