This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation Sort ascending | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI/ASME A112.19.4M | 1984 | Porcelain Enameled Formed Steel Plumbing Fixtures | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI/ASME B16.15 | 1985 | Cast Bronze Threaded Fittings, Classes 125 and 250 | American Society of Mechanical Engineers | |
Coast Guard | 24 CFR 3280.604(b)(2) | ASTM B 43 | 1991 | Standard Specification for Seamless Red Brass Pipe, Standard Sizes | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI/ASME A112.21.3M | 1985 | Hydrants for Utility and Maintenance Use | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM D 2661 | 1991 | Acrylonitrile Butadiene Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM B 306 | 1992 | Standard Specification for Copper Drainage Tube (DWV) | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASSE 1017 | 1986 | Performance Requirements for Temperature Activated Mixing Valves for Primary Domestic Use | American Society of Sanitary Engineering | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI A112.19.5 | 1979 | Trim for Water Closet, Bowls, Tanks and Urinals | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM B 251 | 1993 | Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASSE 1019 | 1978 | Performance Requirements for Wall Hydrants, Frost Proof Automatic Draining, Anti-Backflow Types | American Society of Sanitary Engineering | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM B 88 | 1993 | Standard Specification for Seamless Copper Water Tube | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM D 2665 | 1991 | Poly-Vinyl-Chloride (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASSE 1023 | 1979 | Hot Water Dispensers, Household Storage Type, Electrical | American Society of Sanitary Engineering | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASSE 1002 | 1986 | Performance Requirements for Water Closet Flush Tank Fill Valves (Ballcocks) | American Society of Sanitary Engineering | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME B16.22 | 1989 | Wrought-Copper and Copper Alloy, Solder-Joint Pressure Fitting | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM A 53 | 1993 | Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI Z124.1 | 1987 | Plastic Bathtub Units with Addenda Z124.1A-1990 and Z124.16-1991 | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.1.2 | 1991 | Air Gaps in Plumbing Systems | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | FedSpec WW-P-541E/GEN | 1980 | Plumbing Fixtures (General Specifications) | Federal Specifications Standards and Test Methods | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI/ASME B36.10 | 1979 | Welding and Seamless Wrought Steel Pipe | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM D 3311 | 1992 | Drain, Waste, and Vent (DWV) Plastic Fittings Patterns | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.4.1 | 1993 | Water Heater Relief Valve Drain Tubes | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI Z124.3 | 1986 | Plastic Lavatories with Addendum Z124.3A-1990 | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASSE 1051 | 1990 | Performance Requirements for Air Admittance Valves for Plumbing Drainage Systems, Fixture and Branch Devices | American Society of Sanitary Engineering | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | IAPMO PS 31 | 1991 | Material and Property Standard for Backflow Prevention Devices | International Association of Plumbing and Mechanical Officials | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI/NSF 14 | 1990 | Plastic Piping Components and Related Materials | National Sanitation Foundation | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM D 3309 | 1992 | Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASSE 1025 | 1978 | Diverters for Plumbing Faucets with Hose Spray, Anti-Siphon Type, Residential Applications | American Society of Sanitary Engineering | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI Z124.2 | 1987 | Plastic Shower Receptors and Stalls with Addendum Z124.2A-1990 | American National Standards Institute | |
Coast Guard | 24 CFR 3280.604(b)(2) | ANSI Z21.22 | 1986 | Relief Valves and Automatic Gas Shutoff Devices for Hot Water Supply Systems with Addendum Z21.22A-1990 | American Gas Association | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | NSF 61 | 2001 | Drinking Water System Components-Health Effects | National Sanitation Foundation | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM D 2235 | 1988 | Standard Specification for Solvent Cement for Acrylonitrile Butadiene Styrene (ABS) Plastic Pipe and Fittings | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | IAPMO PS 2 | 1989 | Material and Property Standard for Cast Brass and Tubing P-Traps | International Association of Plumbing and Mechanical Officials | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM F 628 | 1991 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | NSF 24 | 1988 | Plumbing System Components for Manufactured Homes and Recreational Vehicles | National Sanitation Foundation | |
Housing and Urban Development Department | 24 CFR 3280.511(b) | ARI 210/240 | 1989 | Unitary Air-Conditioning and Air-Source Heat Pump Equipment | Air Conditioning and Refrigeration Institute | |
Housing and Urban Development Department | 24 CFR 3280.508(e) | ASHRAE Handbook | 1997 | Fundamentals | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Housing and Urban Development Department | 24 CFR 3280.508(e) | AAMA 1503.1 | 1988 | Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors and Glazed Wall Sections | American Architectural Manufacturers Association | |
Housing and Urban Development Department | 24 CFR 3280.508(e) | NFRC 100 | 1997 | Procedure for Determining Fenestration Product U-factors | National Fenestration Rating Council | |
Housing and Urban Development Department | 24 CFR 3280.508(b) | ASHRAE Handbook | 1997 | Fundamentals | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Housing and Urban Development Department | 24 CFR 3280.508(b) | HUD User No. 0005945 | 1992 | Overall U-values and Heating/Cooling Loads-Manufactured Homes–PNL 8006 | U.S. Department of Housing and Urban Development | |
Housing and Urban Development Department | 24 CFR 3280.508(a) | ASHRAE Handbook | 1997 | Fundamentals | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Housing and Urban Development Department | 24 CFR 3280.504(a)(1) | ASTM E 96 | 1995 | Standard Test Methods for Water Vapor Transmission of Materials | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.5(f) | ANSI/ASCE 7 | 1988 | Minimum Design Loads for Buildings and Other Structures | American Society of Civil Engineers | |
Housing and Urban Development Department | 24 CFR 3280.406(b) | ASTM E 1333 | 1996 | Standard Test Method for Determining Formaldehyde Levels from Wood Products Under Defined Test Conditions Using a Large Chamber | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.405(e)(2) | AAMA 1702.2 | 1995 | Swinging Exterior Passage Doors Voluntary Standard for Utilization in Manufactured-Housing | American Architectural Manufacturers Association | |
Housing and Urban Development Department | 24 CFR 3280.405(e)(1) | ANSI Z34.1 | 1993 | Certification, Third-Party Certification Program | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3280.405(e) | AAMA 1702.2 | 1995 | Swinging Exterior Passage Doors Voluntary Standard for Utilization in Manufactured-Housing | American Architectural Manufacturers Association | |
Housing and Urban Development Department | 24 CFR 3280.405(c) | NWWDA I.S. 4 | 1981 | Industry Standard for Water-Repellent Preservative Non-Pressure Treatment of Millwork | National Wood Window and Door Association | |
Housing and Urban Development Department | 24 CFR 3280.405(b) | AAMA 1702.2 | 1985 | Swinging Exterior Passage Doors Voluntary Standard for Utilization in Manufactured-Housing | American Architectural Manufacturers Association |