This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 114.600(b) | NFPA 92B | 1995 | Smoke Management Systems in Malls, Atria, and Large Areas | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.36(e) | Drawing No. 78051-116 | 1994 | Title not specified | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (79) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(1) Table (Turbidity) | GLI Method 2 | 1992 | Turbidity | Great Lakes Instruments, Inc. | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(4) | APHA Method 602 | 2015 | Tentative Method of the Analysis for Gross Beta Radioactivity Content of the Atmosphere | American Public Health Association | |
Coast Guard | 46 CFR 160.050-3(b) | Federal Standard 191 | 1978 | Textile Test Method 5660 | Federal Specifications Standards and Test Methods | |
Research and Special Programs Administration | 49 CFR 179.16(c)(2) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Food and Drug Administration | 21 CFR 172.860(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.19.9M | 1991 | Non-Vitreous Ceramic Plumbing Fixtures | American Society of Mechanical Engineers | |
Labor Department | 41 CFR 50-204.75 | 49 CFR 396 | 2013 | Inspection, Repair, and Maintenance | Federal Motor Carrier Safety Administration, Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (20) Ortho-phosphate | APHA Method 4500-P E | 1995 | Phosphorus, ascorbic acid method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(173) | ASTM D 5504 | 2008 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas Fuels by Gas Chromatography and Chemiluminescence | ASTM International | |
Coast Guard | 33 CFR 118.3(c) | FHWA Publication | 1966 | Standard Alphabets for Highway Signs | Federal Highway Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 29 CFR 1910.261(g)(18)(iii) | ANSI Addenda B31.1 | 1969 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.890(i)(3) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.8 | NIST Handbook H-28 | 1966 | Handbook of Screw-Thread Standards for Federal Service | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (58) | APHA Method 3111 B | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
Veterans Affairs Department | 38 CFR 51.200(b)(4) | NFPA 99 | 2005 | Standard for Health Care Facilities | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.151 Appendix A | ANSI Z308.1 | 1998 | Minimum Requirements for Workplace First-aid Kits | American National Standards Institute | |
Coast Guard | 46 CFR 56.01-2(k)(13) | MSS SP-72 | 1987 | Ball Valves with Flanged or Butt-Welding Ends for General Service | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Health and Human Services Department | 45 CFR 162.920(c)(2) | CAQH Publication | 2011 | ACME Health Plan, HIPAA Transaction Standard Companion Guide, Refers to the Implementation Guides Based on ASC X12 version 005010, CORE v5010 Master Companion Guide Template, 005010, 1.2, (CORE v 5010 Master Companion Guide Template, 005010, 1.2) | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 761.19(a)(15) | ASTM D 3278 | 1989 | Standard Test Method for Flash Point of Liquids by Setaflash Closed-Cup Apparatus | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.202a S5.4(b)(4) | SAE J-826 | 1995 | Devices for Use in Defining and Measuring Vehicle Seating Accommodations | Society of Automotive Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) Footnote 17 | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IE | APHA Standard Methods, 20th Edition | 1998 | Standard Methods for the Examination of Water and Wastewater. 20th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 763 Appendix A (III)(L)(2) | EPA-600-4-85-049 | 1985 | Measuring Airborne Asbestos Following an Abatement Action | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.124(m)(1) | ASME MFC-3M | 2004 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 75.1107-13(b) | NFPA 22 | 1971 | Standard for Water Tanks for Private Fire Protection | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iv)(C) | UL 58 | 1961 | Steel Underground Tanks for Flammable and Combustible Liquids | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.44(d) | SAE J-211 | 1980 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 1060.240(e)(2) | ASTM D 3802 | 2005 | Standard Test Method for Ball-Pan Hardness of Activated Carbon | ASTM International | |
Coast Guard | 33 CFR 126.15(a)(2) | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 160.151-31(f) | IMO Resolution MSC.295(87) | 2010 | Annex 9 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.295(87), Adoption of Amendments to the Revised Recommendation on Testing of Life-Saving Appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1066.310(b)(1)(ii) | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Acephate) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 258.41(a)(4)(iii)(A) | ASTM D 5261 | 1996 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles | ASTM International | |
Environmental Protection Agency | 40 CFR 63.1282(g)(4)(iii)(B)(1) | ASTM D 1945 | 2003 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(12)(i) | EPA-600-4-79-020 | 1983 | Method 270.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.110(h)(2), Table H-34 | ASME B&PV Code | 1952 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 1065.1010(e)(4) | ISO 3675 | 1998 | Crude petroleum and liquid petroleum products--Laboratory determination of density--Hydrometer method | International Organization for Standardization | |
Food and Drug Administration | 21 CFR 177.1020(c)(2) | FDA Publication | 1985 | Determination of Residual Acrylonitrile and Styrene Monomers Gas Chromatographic Internal Standard Method | Food and Drug Administration, U.S. Department of Health and Human Services | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 571.5(d)(1) | Annual Book of Standards | 1985 | Vol. 05.04, Test Methods for Rating Motor, Diesel, Aviation Fuels, A2. Reference Materials and Blending Accessories, A2.3.2, A2.3.3, and A2.7 | ASTM International | |
Coast Guard | 24 CFR 3280.604(b)(2) | ANSI Z21.22 | 1986 | Relief Valves and Automatic Gas Shutoff Devices for Hot Water Supply Systems with Addendum Z21.22A-1990 | American Gas Association | |
Coast Guard | 33 CFR 127.003(b) | ANSI B16.5 | 1988 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63.3151(b) | ASTM D 1475 | 1998 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(23) | API MPMS | 2007 | Chapter 6, Section 7 | American Petroleum Institute | |
Coast Guard | 46 CFR 132.130(j) | NFPA 1963 | 1993 | Fire Hose Connections | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.124(a) | Drawing No. 127-2000 | 1994 | Upper Torso Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (113) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(d)(4)(i) | EPA Method 415.3 | 2005 | Determination of Total Organic Carbon and Specific UV Absorbance at 254 nm in Source Water and Drinking Water, Revision 1.1 | U.S. Environmental Protection Agency |