This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Food and Drug Administration | 21 CFR 177.1670(b) | ASTM F 34 | 1980 | Standard Test Method for Liquid Extraction of Flexible Barrier Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 87.1, Characteristic level | ICAO Annex 16 | 2008 | Environmental Protection, Volume II—Aircraft Engine Emissions, Third Edition | International Civil Aviation Organization | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(30) | ASTM E 274 | 1970 | Standard Method of Test for Skid Resistance of Paved Surfaces Using a Full-Scale Tire | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (33) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Silver) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Mine Safety and Health Administration | 30 CFR 28.40(d) | UL 198 | 1971 | Standard for Alternating Current Fuses | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.268(s)(1)(v) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.4.1 | 1993 | Water Heater Relief Valve Drain Tubes | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.5(b) | Drawing No. SA 150 M060 | 1994 | Pelvis and abdomen assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.6(v)(1) | FedSpec QQ-P-416 | 1991 | Federal Specification Plating Cadmium (Electrodeposited) | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (33) | APHA Method 6440 B | 2000 | Polynuclear Aromatic Hydrocarbons by Micro Liquid-Liquid Extraction Chromatographic Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Toxaphene) | EPA Method 505 | 1995 | Organohalide pesticides/PCBs (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 52, Subpart U | MESIP | 1979 | State Implementation Plan with Regulatory and Nonregulatory Revisions | State of Maine | |
Coast Guard | 46 CFR 56.01-2(e)(23) | ASTM A 307 | 1997 | Carbon Steel Bolts and Studs, 60,000 PSI Tensile Strength | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(23) | API MPMS | 2007 | Chapter 6, Section 7 | American Petroleum Institute | |
Coast Guard | 46 CFR 132.130(j) | NFPA 1963 | 1993 | Fire Hose Connections | National Fire Protection Association | |
Coast Guard | 21 CFR 172.812(a) | Food Chemicals Codex | 1981 | Glycine | National Academy Press | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(a) | ASTM D 5192 | 2009 | Standard Practice for Collection of Coal Samples from Core | ASTM International | |
Research and Special Programs Administration | 49 CFR 192.7(c)(2) B2 | API RP 5L1 | 2002 | Recommended Practice for Railroad Transportation of Line Pipe | American Petroleum Institute | |
Food and Drug Administration | 21 CFR 184.1583(b) | Food Chemicals Codex | 1981 | Pancreatin | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1304(b) | Food Chemicals Codex | 1981 | Ferric Pyrophosphate | National Academy Press | |
Food and Drug Administration | 21 CFR 178.3740(b) | ASTM D 2161 | 1982 | Standard Method of Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity | ASTM International | |
Environmental Protection Agency | 40 CFR 60.18(f)(3) | ASTM D 1946 | 2006 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Federal Communications Commission | 47 CFR 25.146(a)(2) | ITU Radio Regulations, Volume 1: Articles, Article 22, “S... | 2016 | Control of interference to geostationary-satellite systems | International Telecommunication Union--Telecommunication | |
Coast Guard | 46 CFR 121.240(b) | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Consumer Product Safety Commission | 16 CFR 1211.8(d) | UL 1998 | 1998 | Software in Programmable Components | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(b)(8)(xiv) | EPA Method 1681 | 2006 | Fecal Coliforms in Sewage Sludge (Biosolids) by Multiple-Tube Fermentation using A-1 Medium | U.S. Environmental Protection Agency | |
Drug Enforcement Administration | 21 CFR 1311.55(c)(1) | FIPS Publication 140-2 | 2002 | Federal Information Processing Standard Publication (FIPS PUB) 140-2, Change Notices (12-03-2002), Security Requirements for Cryptographic Modules, including Annexes A through D | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (36) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (10) Copper | ASTM D 1688C | 1995 | Standard Test Methods for Copper in Water, Atomic Absorption, Graphite Furnace | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-89 | 1978 | Upper Torso Assembly | General Motors Corporation | |
Coast Guard | 46 CFR 34.30-1 | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 0051 | 1996 | Midget Impinger HCl/Cl2 Emission Sampling Train | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.184(b) | Drawing No. 175-4000 | 2009 | Thorax Assembly with Rib Extensions | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iv)(D) | EPA-600-4-80-032 | 1980 | Prescribed Procedures for Measurement of Radioactivity in Drinking Water, Appendix B, Error and Statistical Calculations | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.15 Note 9 | EPA Method 1655 | 2015 | Determination of Crude Oil Contamination in Non-Aqueous Drilling Fluids by Gas Chromatography/Mass Spectrometry (GC/MS) | U.S. Environmental Protection Agency | |
Federal Communications Commission | 47 CFR 80.1101(d)(1)(ii) | IMO Resolution A.804(19) | 1995 | Performance Standards for Shipborne MF Radio Installations Capable of Voice Communication and Digital Selective Calling | International Maritime Organization | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(10)(i) | EPA-600-4-91-010 | 1983 | Method 249.1--Atomic Absorption; direct aspiration | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 197.328(d)(3) | ASME PVHO-1 | 2000 | Safety Standard for Pressure Vessels for Human Occupancy | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 147.500(b)(4) | FLUIC regulations | 1982 | Florida Administrative Code, Chapter 17-4 (1982) (Permits); | State of Florida | |
Energy Department | 10 CFR 430 Subpart B, App. V, 3, b | EPA Publication | 2005 | ENERGY STAR Program Requirements for Residential Light Fixtures, Version 4.0 | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.522(r)(7) | Bellcore SR-TSV-002275 | 1990 | BOC Notes on the LEC Networks-1990, Issue 1 | Bell Communications Research | |
Energy Department | 10 CFR 430 Subpart B, App. M, 1.12 | ASHRAE 116 | 2005 | Methods for Testing for Rating for Seasonal Efficiency of Unitary Air Conditioners and Heat Pumps | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.176-4(b) | Federal Standard 751A | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.2.5 | ASTM D 1552 | 2001 | Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.3.3.1.2 | ASTM D 4468 | 2006 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Calorimetry | ASTM International | |
Environmental Protection Agency | 40 CFR 194.22(b) | NUREG 1297 | 1988 | Peer Review for High Level Nuclear Waste Repositories | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1910.103(b) | ANSI B31.1 Addendum | 1969 | Code for Pressure Piping Addendum | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 86.1817-05(c) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Food and Drug Administration | 21 CFR 177.1960(b)(1)(ii) | ASTM D 1243 | 1979 | Standard Methods of Test for Dilute Solution Viscosity of Vinyl Chloride Polymers | ASTM International |