This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 62.14452(m) | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (36) | EPA Method 602 | 1982 | Purgeable Aromatics by GC/PID Purge & Trap | U.S. Environmental Protection Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.925(b)(3) | NACE RP-0502 | 2002 | NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology | National Association of Corrosion Engineers | |
Environmental Protection Agency | 40 CFR 763 Appendix E 1.8(8) | DOI/BOM Information Circular 8751 | 1977 | Selected Silicate Minerals and Their Asbestiform Varieties: Mineralogical Definitions and Identification-Characterization | Bureau of Mines, U.S. Department of Interior | |
Environmental Protection Agency | 40 CFR 98.124(m)(8) | ASME MFC-14M | 2003 | Measurement of Fluid Flow Using Small Bore Precision Orifice Meters | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | UL 1995 | 1990 | Cooling equipment: Including evaporative coolers, heat pumps and other equipment | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 63.25-9(a) | ASTM F 1323 | 2001 | Standard Specification for Shipboard Incinerators | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.102(a) | CGA G-1 | 2009 | Acetylene | Compressed Gas Association | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.3.2(d) | ASTM E 1 | 1968 | Standard Specification for ASTM Thermometers | ASTM International | |
Environmental Protection Agency | 40 CFR 261.24(a) | EPA SW-846 | 2014 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Method 1311 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.1282(g)(4)(iii)(B)(3) | ASTM D 4891 | 2006 | Standard Test Method for Heating Value of Gases in Natural Gas Range by Stolchiometric Combustion | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.405(e)(1) | ANSI Z34.1 | 1993 | Certification, Third-Party Certification Program | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 179.300-15(a) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Coast Guard | 46 CFR 10.225(b)(3)(iv) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.15(b) | Drawing No. SA 103C 010 | 1976 | Head Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.3.3.1.2 | ASTM D 1072 | 2006 | Standard Test Method for Total Sulfur in Fuel Gases | ASTM International | |
Coast Guard | 46 CFR 58.03-1(g)(8) | ASTM D 93 | 1997 | Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(4)(i) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Rural Utilities Service | 7 CFR 1755.901(e)(1) | TIA/EIA 455-3A, FOTP-3 | 1989 | Procedure to Measure Temperature Cycling on Optical Fibers, Optical Cable, and Other Passive Fiber Optic Components | Electronic Industries Association and/or Telecommunications Industry Association | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(1) | ANSI B30.5, 5-1.1.1 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Load Ratings—Where Stability Governs Lifting Performance”), paragraphs (a)-(d) (including subparagraphs) | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (37) | ASTM D 5673 | 2005 | Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (10) Copper | APHA Method 3120 B | 1995 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.102-17(b)(2)(i) | ASTM A 20/A 20M | 1993 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | ASTM International | |
Minerals Management Service | 30 CFR 250.1202(l)(4) | API MPMS | 2007 | Chapter 11, Section 1 | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(u)(1) | DOT Publication | 1993 | MUTCD Part VI, Standards and Guides for Traffic Controls for Street and Highway Construction, Maintenance, Utility, and Incident Management Operation | U.S. Department of Transportation | |
Rural Utilities Service | 7 CFR 1728.202(f)(1)(v)(C) | AWPA A9 | 2001 | Standard Method for Analysis of Treated Wood and Treating Solutions by X-ray Spectroscopy | American Wood Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.186(b)(1) | Drawing No. 175-8000 | 2009 | Neoprene Body Suit | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA Footnote 18 | Colilert® Method | 2013 | Colilert Test Kit | IDEXX Laboratories | |
Coast Guard | 46 CFR 169.703(c)(7)(i) | NFPA 302 | 1980 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 435.13 Note 7 | EPA Method 1647 | 2015 | Protocol for the Determination of Degradation of Non Aqueous Base Fluids in a Marine Closed Bottle Biodegradation Test System: Modified ISO 11734:1995 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(k)(12) | Alaska Statute 42.45.045 | 2015 | Renewable energy grant fund and recommendation program | State of Alaska | |
Federal Communications Commission | 47 CFR 15.31(a)(3) | ANSI C63.4 | 2003 | Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz | American National Standards Institute | |
Coast Guard | 46 CFR 111.105-3 | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 141.402(c)(2) Table | APHA Method 9230 B | 2007 | Fecal Streptococcus and Enterococcus Groups, Multiple-Tube Technique | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.41da Subbituminous coal | ASTM D 388 | 1991 | Standard Classification of Coals by Rank | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | SCACM Publication | 1985 | Certified Construction Standards and Specifications, Guide for Uniform Cabinet Specifications | Southern California Association of Cabinet Manufacturers | |
Coast Guard | 46 CFR 53.01-10(c)(1) | UL 1453 | 1995 | Standard for Electric Booster and Commercial Storage Tank Water Heaters, Fourth Edition | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Benzene) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-27A | 1969 | Specification for L-807 Eight-foot and Twelve-foot Unlighted or Externally Lighted Wind Cone Assemblies | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.151-7 | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (63) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | AOAC Method 974.27 | 1990 | Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method | AOAC International | |
Food and Drug Administration | 21 CFR 178.3770(d)(1) | ASTM D 566 | 1982 | Standard Test Method for Dropping Point of Lubricating Grease | ASTM International | |
Environmental Protection Agency | 40 CFR 59.412(b)(1) | ASTM C 1315 | 1995 | Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete | ASTM International | |
Coast Guard | 46 CFR 164.018-11(b)(3) | Federal Test Method Standard 141 | 1974 | Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling, and Testing, Method 6141, Washability of Paints | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.176-4(b) | ASTM B 117 | 1997 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (73) | EPA Method 612 | 1982 | Chlorinated Hydrocarbons GC/ECD | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 571.205 S6.3(a) | ANSI/SAE Z26.1 | 1996 | Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 799.5087(j) Table 3, C4 | ASTM E 729 | 1996 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1615.4(g)(4)(i) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists |