U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Standards.gov

Standards Incorporated by Reference (SIBR) Database

Download PDF

If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.

SUBSCRIBE

DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.

NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.

Displaying 651 - 700 of 26482
Download CSV
Incorporated by (Agency) FR Citation CFR Citation Document Number Document Edition / Year Title of Standard Standard Publishing Organization
Energy Department 10 CFR 431.12, General purpose motor (1) NEMA MG-1 1993 Motors and Generators National Electrical Manufacturers Association
Energy Department 10 CFR 431.12, General purpose motor (2) NEMA MG-1 1993 Motors and Generators National Electrical Manufacturers Association
Energy Department 10 CFR 431.12, Nominal full load efficiency NEMA MG-1 1993 Motors and Generators National Electrical Manufacturers Association
Energy Department 10 CFR 431.133(b)(1) ARI 810 2003 Performance Rating of Automatic Commercial Ice-Makers Air Conditioning and Refrigeration Institute
Energy Department 10 CFR 431.133(b)(2) ASHRAE 29 2005 Methods of Testing Automatic Ice Makers American Society of Heating, Refrigerating and Air Conditioning Engineers
Energy Department 10 CFR 431.134(b) ARI 810 2003 Performance Rating of Automatic Commercial Ice-Makers 2003 Air Conditioning and Refrigeration Institute
Energy Department 10 CFR 431.134(b) ASHRAE 29 2005 Methods of Testing Automatic Ice Makers American Society of Heating, Refrigerating and Air Conditioning Engineers
Energy Department 10 CFR 431.15(b)(1) NEMA MG-1 1993 Motors and Generators National Electrical Manufacturers Association
Energy Department 10 CFR 431.15(b)(1)(i) NEMA MG-1 1993 Motors and Generators, Section I, Part 1 National Electrical Manufacturers Association
Energy Department 10 CFR 431.15(b)(1)(ii) NEMA MG-1 1993 Motors and Generators, Section I, Part 4 National Electrical Manufacturers Association
Energy Department 10 CFR 431.15(b)(1)(iii) NEMA MG-1 1993 Motors and Generators, Section II, Part 11 National Electrical Manufacturers Association
Energy Department 10 CFR 431.15(b)(1)(iv) NEMA MG-1 1993 Motors and Generators, Section II, Part 12 National Electrical Manufacturers Association
Energy Department 10 CFR 431.15(b)(1)(v) NEMA MG-1 1993 Motors and Generators, Section II, Part 14 National Electrical Manufacturers Association
Energy Department 10 CFR 431.15(b)(2) IEEE 112 1996 Test Procedure for Polyphase Induction Motors and Generators Institute of Electrical and Electronics Engineers
Energy Department 10 CFR 431.15(b)(3) CSA C390 1993 Input-Output Method With Indirect Measurement of the Stray-Load Loss and Direct Measurement of the Stator Winding (I2R), Rotor Winding (I2R), Core and Windage-Friction Losses Canadian Standards Association
Energy Department 10 CFR 431.15(b)(4) IEC 60034-1 1996 Rotating Electrical Machines International Electrotechnical Commission
Energy Department 10 CFR 431.15(b)(5) IEC 60050-411 1996 International Electrotechnical Vocabulary International Electrotechnical Commission
Energy Department 10 CFR 431.15(b)(6) IEC 60072-1 1991 Dimensions and Output Series for Rotating Electrical Machines International Electrotechnical Commission
Energy Department 10 CFR 431.15(b)(7) IEC 60034-12 1980 Rotating Electrical Machines International Electrotechnical Commission
Energy Department 10 CFR 431.15(e)(2)(i) NIST Handbook 150 1994 Procedures and General Requirements National Institute of Standards and Technology, National Voluntary Laboratory Accreditation Program
Energy Department 10 CFR 431.15(e)(2)(i) NIST Handbook 150-10 1995 Efficiency of Electric Motors National Institute of Standards and Technology, National Voluntary Laboratory Accreditation Program
Energy Department 10 CFR 431.15(e)(2)(ii) ISO/IEC Guide 25 0 General requirements for the competence of calibration and testing laboratories International Organization for Standardization / International Electrotechnical Commission
Energy Department 10 CFR 431.15(e)(2)(iii) ISO Guide 27 0 Guidelines for corrective action International Organization for Standardization
Energy Department 10 CFR 431.15(e)(2)(iv) ISO/IEC Guide 28 0 General rules for a model third-party certification system for products International Organization for Standardization / International Electrotechnical Commission
Energy Department 10 CFR 431.15(e)(2)(v) ISO/IEC Guide 58 0 Calibration and testing laboratory accreditation systems—General requirements for operation and recognition International Organization for Standardization / International Electrotechnical Commission
Energy Department 10 CFR 431.15(e)(2)(vi) ISO/IEC Guide 65 0 General requirements for bodies operating product certification systems International Organization for Standardization / International Electrotechnical Commission
Energy Department 10 CFR 431.18(b) NIST Handbook 150-10 1995 Efficiency of Electric Motors National Institute of Standards and Technology, National Voluntary Laboratory Accreditation Program
Energy Department 10 CFR 431.18(b) NIST Handbook 150 1994 Program Procedures and General Requirementsns National Institute of Standards and Technology, National Voluntary Laboratory Accreditation Program
Energy Department 10 CFR 431.19(b)(4) IEEE 112 1996 Test Procedure for Polyphase Induction Motors and Generators Institute of Electrical and Electronics Engineers
Energy Department 10 CFR 431.19(b)(4) CSA C390 1993 Energy Efficiency Test Methods for Three-Phase Induction Motors, Test Method (1) Canadian Standards Association
Energy Department 10 CFR 431.19(c)(3) ISO/IEC Guide 25 0 General requirements for the competence of calibration and testing laboratories International Organization for Standardization / International Electrotechnical Commission
Energy Department 10 CFR 431.19(c)(3) ISO/IEC Guide 58 0 Calibration and testing laboratory accreditation systems—General requirements for operation and recognition International Organization for Standardization / International Electrotechnical Commission
Energy Department 10 CFR 431.19(c)(4) IEEE 112 1996 Test Procedure for Polyphase Induction Motors and Generators Institute of Electrical and Electronics Engineers
Energy Department 10 CFR 431.19(c)(4) CSA C390 1993 Energy Efficiency Test Methods for Three-Phase Induction Motors, Test Method (1) Canadian Standards Association
Energy Department 10 CFR 431.19(c)(4) ISO/IEC Guide 25 0 General requirements for the competence of calibration and testing laboratories International Organization for Standardization / International Electrotechnical Commission
Energy Department 10 CFR 431.20(b)(4) CSA C390 1993 Energy Efficiency Test Methods for Three-Phase Induction Motors, Test Method (1) Canadian Standards Association
Energy Department 10 CFR 431.20(b)(4) IEEE 112 1996 Test Procedure for Polyphase Induction Motors and Generators Institute of Electrical and Electronics Engineers
Energy Department 10 CFR 431.20(c)(3) ISO/IEC Guide 28 0 General rules for a model third-party certification system for products International Organization for Standardization / International Electrotechnical Commission
Energy Department 10 CFR 431.20(c)(3) ISO Guide 27 0 Guidelines for corrective action International Organization for Standardization
Energy Department 10 CFR 431.20(c)(3) ISO/IEC Guide 25 0 General requirements for the competence of calibration and testing laboratories International Organization for Standardization / International Electrotechnical Commission
Energy Department 10 CFR 431.20(c)(3) ISO/IEC Guide 65 0 General requirements for bodies operating product certification systems International Organization for Standardization / International Electrotechnical Commission
Energy Department 10 CFR 431.20(c)(4) CSA C390 1993 Energy Efficiency Test Methods for Three-Phase Induction Motors, Test Method (1) Canadian Standards Association
Energy Department 10 CFR 431.20(c)(4) ISO/IEA Guide 25 0 General requirements for the competence of calibration and testing laboratories International Organization for Standardization / International Electrotechnical Commission
Energy Department 10 CFR 431.20(c)(4) IEEE 112 1996 Test Procedure for Polyphase Induction Motors and Generators Institute of Electrical and Electronics Engineers
Energy Department 10 CFR 431.293(b)(1) AHAM HRF-1 2004 Energy, Performance and Capacity of Household Refrigerators, Refrigerator-Freezers and Freezers Association of Home Appliance Manufacturers
Energy Department 10 CFR 431.293(b)(2) ASHRAE 32.1 2004 Methods of Testing for Rating Vending Machines for Bottled, Canned, and Other Sealed Beverages American Society of Heating, Refrigerating and Air Conditioning Engineers
Minerals Management Service 10 CFR 431.294(b)(1) ASHRAE 32.1 2004 Methods of Testing for Rating Vending Machines for Bottled, Canned, and Other Sealed Beverages American Society of Heating, Refrigerating and Air Conditioning Engineers
Minerals Management Service 10 CFR 431.294(b)(2) ASHRAE 32.1 2004 Methods of Testing for Rating Vending Machines for Bottled, Canned, and Other Sealed Beverages American Society of Heating, Refrigerating and Air Conditioning Engineers
Coast Guard 10 CFR 431.294(b)(2) AHAM HRF-1 2004 Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers Association of Home Appliance Manufacturers
Energy Department 10 CFR 431.31(a)(2) NEMA MG-1 1993 Motors and Generators National Electrical Manufacturers Association

Accessing Standards Incorporated by Reference

This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).

More information