This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.077-5(b) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 147.7(d)(1) | NFPA 2001 | 2008 | Standard on Clean Agent Fire Extinguishing Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 169.115(c)(1) | ABYC P-1 | 1973 | Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Coast Guard | 27 CFR 21.47(a) | The United States Pharmacopoeia | 1980 | Formula No. 23-A | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 114.600(b) | UL 723 | 1994 | Surface Burning Characteristics of Building Materials | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 111.52-5(b) | DDS 300-2 | 1988 | AC Fault Current Calculations | Naval Sea Systems Command | |
Coast Guard | 46 CFR 160.002-4(e) | DWG No. F-49-6-1 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Adult) | U.S. Coast Guard | |
Coast Guard | 46 CFR 25.45-2(b)(3) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Coast Guard | 46 CFR 12.05-3(b)(3) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 116.405(j)(1) | DOC FF 4-72.16 | 2012 | Standard for Mattress Flammability, 16 CFR Part 1632, Subpart A | U.S. Department of Commerce | |
Coast Guard | 46 CFR 160.052-4(b) | 46 CFR 160.055 | 2012 | Life Preserver, Unicellular Plastic Foam, Adult and Child NDG | U.S. Coast Guard | |
Coast Guard | 46 CFR 114.400(b), Smoke developed rating | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC H-22 | 1986 | DC Electric Bilge Pumps Operating Under 50 Volts | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.076-11(b)(3) | UL 1191 | 2008 | UL Standard for Safety for Components for Personal Flotation Devices, Fourth Edition including revisions through August 24, 2011 | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 164.015-1(a)(3) | Federal Standard 601 | 1955 | Rubber, Sampling and Testing | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 182.440(a)(2)(i) | ASTM D 2863 | 1995 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-like Combustion of Plastics (Oxygen Index) | ASTM International | |
Coast Guard | 46 CFR 177.300(d)(2) | ABS Publication | 1997 | Guide for Building and Classing High Speed Craft | American Bureau of Shipping | |
Coast Guard | 46 CFR 160.115-13(d)(1) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Coast Guard | 46 CFR 114.400(b), Char length | NFPA 261 | 1994 | Test for Determining Resistance of Mock-up Upholstered Furniture Material Assemblies to Ignition by Smoldering Cigarettes | National Fire Protection Association | |
Coast Guard | 24 CFR 3280.803(k)(3) | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 40 CFR 136.3(a) Table IB (34) | ASTM D 858B | 2007 | Standard Test Methods for Manganese in Water, Atomic Absorption, Chelation-Extraction | ASTM International | |
Coast Guard | 46 CFR 160.135-5(b)(12) | ASTM F 1166 | 2007 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities | ASTM International | |
Coast Guard | 46 CFR 160.151-21(i) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 7 CFR 1755.703(a)(1) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 46 CFR 110.10-1(j) | Lloyd's Publication | 2002 | LR Type Approval System: Test Specification Number 1 | Lloyd's Register of Shipping | |
Coast Guard | 46 CFR 160.151-15(d) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-5(d)(3) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.170-5(b)(2) | ASTM A 276 | 2008 | Standard Specification for Stainless Steel Bars and Shapes | ASTM International | |
Coast Guard | 46 CFR 35.25-10(a) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 56.01-2(d)(6) | ASME B16.4 | 1998 | Gray Iron Threaded Fittings, Classes 125 and 250 | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 162.060-26(a) | EPA-600-R-10-146 | 2010 | Generic Protocol for the Verification of Ballast Water Treatment Technologies, version 5.1 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 175.600(b) Table | ANSI Z26.1 | 1977 | Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Coast Guard | 46 CFR 164.120-5(d)(2) | ISO 175:1999(E) | 1999 | Plastics—Methods of test for the determination of the effects of immersion in liquid chemicals, Second Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 182.465(i) | ABYC H-32 | 1984 | Ventilation of Boats Using Diesel Fuel | American Boat and Yacht Council | |
Coast Guard | 46 CFR 170.270(c)(2) | ASTM F 1197 | 1994 | Standard Specification for Sliding Watertight Door Control Systems1 | ASTM International | |
Coast Guard | 33 CFR 164.03(b) | IMO Resolution MSC.74 (69), Annex 3 | 1998 | Recommendation on Performance Standards for an Universal Shipborne Automatic Identification System (AIS) | International Maritime Organization | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(4)(ii) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
Coast Guard | 40 CFR 136.3(a) Table IB (2) | APHA Method 2320 B | 1997 | Alkalinity by Titration Method | American Public Health Association | |
Coast Guard | 46 CFR 58.03-1(e)(2) | API RP 53 | 1984 | Recommended Practice for Blowout Prevention Equipment for Drilling Wells | American Petroleum Institute | |
Coast Guard | 46 CFR 182.440(a)(2)(ii) | UL 1102 | 1992 | Non integral Marine Fuel Tanks | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.30-5(c)(1) | ASME B16.11 | 2001 | Forged Fittings, Socket-Welding and Threaded | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 183.540 | ANSI A17.1 | 1984 | Safety Code for Elevators, Dumbwaiters and Moving Walks | American National Standards Institute | |
Coast Guard | 46 CFR 52.05-30(b) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 12 | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 195.01-3(b) | ASTM F 1014 | 1992 | Standard Specification for Flashlights on Vessels | ASTM International | |
Coast Guard | 46 CFR 98.01-3(b) | ASME B&PV Code | 1986 | Boiler and Pressure Vessel Code, Section V, Nondestructive Examination | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.176-8(c)(2)(ii) | FAA TSO-C13d | 1983 | Federal Aviation Administration Standard for Life Preservers | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 32.01-1(c)(2) | ASTM F 1273 | 2007 | Standard Specification for Tank Vent Flame Arresters | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(9) | ASTM A 178/A 178M | 1995 | Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B 210 | 1996 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes | ASTM International |