Coast Guard |
|
46 CFR 197.510(b) |
ANSI Z88.2 |
1980 |
Respiratory Protection
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(25) |
ANSI Addenda B31.1 |
1969 |
Addenda to Code for Pressure Piping
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(47) |
ANSI Z4.1 |
1968 |
Requirements for Sanitation in Places of Employment
|
American National Standards Institute |
Housing and Urban Development Department |
|
24 CFR 200.926a(c)(3) |
ANSI A58.1 |
1982 |
Building Code Requirements for Minimum Design Loads in Buildings and Other Structures
|
American National Standards Institute |
Coast Guard |
|
46 CFR 153.4(b) |
ANSI B16.31 |
1971 |
Non-Ferrous Pipe Flanges
|
American National Standards Institute |
Housing and Urban Development Department |
|
24 CFR 200.937(a)(1) |
ANSI Z124.2 |
1980 |
Plastic Shower Receptors and Stalls
|
American National Standards Institute |
Federal Communications Commission |
88 FR 67108 |
47 CFR 73 |
ANSI C63.4a-2017 |
2017 |
Updating References to Standards Related to the Commission's Equipment Authorization Program
|
American National Standards Institute |
Energy Department |
87 FR 37685 |
10 CFR 431 |
ANSI C78.43-2017 |
2017 |
Energy Conservation Program: Test Procedure for Metal Halide Lamp Fixtures
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(70) |
ANSI Z87.1 |
1998 |
Practice of Occupational and Educational Eye and Face Protection
|
American National Standards Institute |
Federal Communications Commission |
|
47 CFR 15.31(a)(2) |
ANSI C63.17 |
1998 |
Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.66 Appendix D (d)(6)(i) |
ANSI A120.1 |
1970 |
Safety Code for Powered Platforms for Exterior Building Maintenance
|
American National Standards Institute |
Energy Department |
87 FR 55090 |
10 CFR 429 |
IEC 62040-3:2011 |
2011 |
Energy Conservation Program: Test Procedure for Battery Chargers
|
American National Standards Institute |
Energy Department |
|
10 CFR 440 Appendix A |
ANSI Z21.17 |
1984 |
Domestic Gas Conversion Burners, including Z21.17a-90
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.261(a)(3)(iii) |
ANSI A17.1 |
1965 |
Safety Code for Elevators, Dumbwaiters and Moving Walks
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1926.552(c)(16) |
ANSI A10.4 |
1963 |
Safety Requirements for Workmen's Hoists
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(75) |
ANSI Z89.1 |
1997 |
Safety Requirements for Industrial Head Protection
|
American National Standards Institute |
Mine Safety and Health Administration |
|
30 CFR 72.710 |
ANSI Z88.2 |
1969 |
Respiratory Protection
|
American National Standards Institute |
Labor Department |
89 FR 28218 |
30 CFR 60 |
ANSI Z88.2-1969 |
1969 |
Lowering Miners' Exposure to Respirable Crystalline Silica and Improving Respiratory Protection
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(40) |
ANSI K13.1 |
1967 |
Identification of Gas Mask Containers
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(8) |
ANSI A17.1c |
1969 |
Elevators, Dumbwaiters, Escalators, and Moving Walks Supplement
|
American National Standards Institute |
Coast Guard |
|
33 CFR 154.810(d)(5)(i) |
ANSI B16.5 |
1988 |
Steel Pipe Flanges and Pipe Fittings
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1926.6(ff)(1) |
ANSI B15.1 |
1958 |
Safety Code for Mechanical Power-Transmission Apparatus
|
American National Standards Institute |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/BHMA A156.2 |
1989 |
Standard for Bored and Preassembled Locks and Latches
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1926.200(c)(3) |
ANSI Z535.1 |
2011 |
Safety Colors
|
American National Standards Institute |
Coast Guard |
|
46 CFR 128.240(b)(2) |
ANSI B31.1 |
1989 |
Code for Pressure Piping, Power Piping
|
American National Standards Institute |
Federal Railroad Administration |
|
49 CFR 227 Appendix E III A |
ANSI S3.6 |
2004 |
Specification for Audiometers
|
American National Standards Institute |
Environmental Protection Agency |
84 FR 15846 |
40 CFR 60 |
ANSI/ASME PTC 19.10-1981 |
1981 |
Standards of Performance for New Stationary Sources and Emission Guidelines for Existing Sources: Commercial and Industrial Solid Waste Incineration Units; Technical Amendments
|
American National Standards Institute |
Research and Special Programs Administration |
|
18 CFR 33.32(a)(3) |
ALI Publication |
1992 |
Restatement of the Law (Third) Trusts Section 227
|
American Law Institute |
Federal Energy Regulatory Commission |
|
18 CFR 35.33(c) |
ALI Publication |
1992 |
Restatement of the Law (Third) Trusts Section 227
|
American Law Institute |
Housing and Urban Development Department |
|
24 CFR 3280.304(b)(1) |
AISI Publication |
1996 |
Specification for the Design of Cold-Formed Steel Structural Members
|
American Iron and Steel Institute |
Housing and Urban Development Department |
|
24 CFR 3280.4(a) |
AISI All Standards |
2013 |
All specifications, standards and codes without specific reference
|
American Iron and Steel Institute |
Housing and Urban Development Department |
|
24 CFR 3280.304(b)(1) |
SEI/ASCE 8 |
2002 |
Specification for the Design of Cold-Formed Stainless Steel Structural Members
|
American Iron and Steel Institute |
Housing and Urban Development Department |
|
24 CFR 3280.305(j)(1) |
SEI/ASCE 8 |
2002 |
Specification for the Design of Cold-Formed Stainless Steel Structural Members
|
American Iron and Steel Institute |
Housing and Urban Development Department |
|
24 CFR 3280.304(b)(1) |
ASCE 19 |
1996 |
Manual for Structural Applications of Steel Cables for Buildings
|
American Iron and Steel Institute |
Housing and Urban Development Department |
|
24 CFR 3280.305(j)(1) |
AISI Publication |
1996 |
Specification for the Design of Cold-Formed Steel Structural Members
|
American Iron and Steel Institute |
Housing and Urban Development Department |
89 FR 75704 |
24 CFR 3280 |
AISI S100–12 |
2012 |
Manufactured Home Construction and Safety Standards
|
American Iron and Steel Institute |
Mine Safety and Health Administration |
|
30 CFR 75.1712-3(b) |
AIA Code |
1967 |
National Building Code
|
American Insurance Association |
Mine Safety and Health Administration |
|
30 CFR 71.402(b) |
AIA Code |
1967 |
National Building Code
|
American Insurance Association |
Housing and Urban Development Department |
|
24 CFR 3280.4(a) |
AITC All Standards |
2013 |
All specifications, standards and codes without specific reference
|
American Institute of Timber Construction |
Housing and Urban Development Department |
|
24 CFR 3280.304(b)(1) |
AITC A190.1 |
1992 |
Structural Glued Laminated Timber
|
American Institute of Timber Construction |
Rural Utilities Service |
|
7 CFR 1728.202(b)(10)(ii) |
AITC 200 |
2004 |
Inspection Manual
|
American Institute of Timber Construction |
Rural Utilities Service |
|
7 CFR 1728.97(b)(1) |
AITC 200 |
2004 |
Inspection Manual
|
American Institute of Timber Construction |
Rural Utilities Service |
|
7 CFR 1728.201(a)(9) |
AITC 200 |
2004 |
Inspection Manual
|
American Institute of Timber Construction |
Rural Utilities Service |
|
7 CFR 1728.202(c)(3) |
AITC 200 |
2004 |
Inspection Manual
|
American Institute of Timber Construction |
Agriculture Department |
84 FR 28186 |
7 CFR 1728 |
AITC 200-2009 |
2009 |
Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service Electric and Telecommunications Borrowers
|
American Institute of Timber Construction |
Housing and Urban Development Department |
|
24 CFR 3280.4(a) |
AISC All Standards |
2013 |
All specifications, standards and codes without specific reference
|
American Institute of Steel Construction |
Housing and Urban Development Department |
|
24 CFR 3280.304(b)(1) |
AISC S335 |
1989 |
Specification for Structural Steel Buildings--Allowable Stress Design and Plastic Design
|
American Institute of Steel Construction |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(f)(1) |
ANSI/AISC 360 |
2005 |
Specification for Structural Steel Buildings
|
American Institute of Steel Construction |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.901(a)(3) |
ANSI/AISC 360 |
2005 |
Specification for Structural Steel Buildings
|
American Institute of Steel Construction |
Housing and Urban Development Department |
89 FR 75704 |
24 CFR 3280 |
AISC 360–10 |
2010 |
Manufactured Home Construction and Safety Standards
|
American Institute of Steel Construction |