This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization Sort descending |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (13) | USGS O-2060-01 | 2001 | Pesticides in Water by SPE and HPLC-MS. Official Name: Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by Graphitized Carbon-Based Solid-Phase Extraction and HPLC-MS | U.S. Geological Survey | |
Coast Guard | 40 CFR 136.3(a) Table IB (1) | USGS I-1020-85 | 1989 | Acidity using H2O2 procedure | U.S. Geological Survey | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (13) | USGS I-3152-85 | 1985 | Calcium by Flame Atomic Absorption | U.S. Geological Survey | |
National Oceanic and Atmospheric Administration | 50 CFR 226.210 | USGS Paper 2294 | 1987 | Hydrologic Unit Maps, Water Supply | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | USGS I-3270-85 | 1985 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID Footnote 12 | USGS Water-Resources Investigations Report 01-4134 | 2001 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Pesticides in Water by Graphitized Carbon-Based Solid-Phase Extraction and High-Performance Liquid Chromatography/Mass Spectrometry | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 5 | USGS Open File Report (OFR) 93-125 | 1993 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Inorganic and Organic Constituents in Water and Fluvial Sediments | U.S. Geological Survey | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (15) | USGS I-3561-85 | 1985 | Chemical Oxygen Demand dichromate oxidation 0.025N | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (16) | USGS I-2057-90 | 1990 | Anions, ion-exchange chromatographic, automated | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (44) | USGS I-4601-85 | 1985 | Phosphorus, orthophosphate, total, colorimetric, phosphomolybdate, automated-segmented flow | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 48 | USGS Open File Report (OFR) 92-146 | 1992 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Total Phosphorus by Kjeldahl Digestion Method and an Automated Colorimetric Finish That Includes Dialysis | U.S. Geological Survey | |
Coast Guard | 40 CFR 136.3(a) Table IB (3) | USGS I-4471-97 | 1997 | Metals by Inductively Coupled Plasma | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (1) | USGS I-3062-85 | 1989 | Arsenic by Gaseous Hydride Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA Note 4 | USGS Publication | 1989 | Techniques of Water-Resource Investigations, Book 5, Laboratory Analysis, Chapter A4, Methods for Collection and Analysis of Aquatic Biological and Microbiological Samples | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 52.741(a)(3), Plant | SIC Manual | 1987 | Standard Industrial Classification Manual | U.S. Government Printing Office | |
Environmental Protection Agency | 40 CFR 52.741(a)(3), Standard Industrial Classification Manual | SIC Manual | 1987 | Standard Industrial Classification Manual | U.S. Government Printing Office | |
Environmental Protection Agency | 40 CFR 52.742(c) | SIC Manual | 1987 | Standard Industrial Classification Manual | U.S. Government Printing Office | |
Environmental Protection Agency | 40 CFR 763 Appendix E 2.10(9) | NRL Report 7879 | 1975 | Quantitative Analysis of Airborne Asbestos by X-ray Diffraction | U.S. Naval Research Laboratory | |
Environmental Protection Agency | 40 CFR 61, Appendix D, Reference 2 | NRC Guide 3.59 | 1987 | Methods for Estimating Radioactive and Toxic Airborne Source Terms for Uranium Milling Operations | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(3)(iii)(B) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(c)(3)(iv) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(3)(ii) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(3)(iv)(A) | NRC Regulatory Guide 1.147 | 2007 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.53(a) | 10 CFR Part 20 | 2014 | Protection Against Radiation | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(3)(iv)(B) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(4)(i) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(4) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(4)(i) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(d)(2)(iii) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 40 CFR 61, Appendix D, Purpose and Background | NRC Guide 3.59 | 1987 | Methods for Estimating Radioactive and Toxic Airborne Source Terms for Uranium Milling Operations | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(4)(ii) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(4)(ii) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Coast Guard | 10 CFR 50.55a(b)(5)(iii) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(4)(i) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(5) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 40 CFR 194.5(a)(1) | NUREG 1297 | 1988 | Peer Review for High Level Nuclear Waste Repositories | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(5)(i) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 40 CFR 194.27(b) | NUREG 1297 | 1988 | Peer Review for High Level Nuclear Waste Repositories | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(e)(2)(iii) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(4)(ii) | NRC Regulatory Guide 1.147 | 2007 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 87 FR 11934 | 10 CFR 50 | NUREG–2228 | 2020 | Approval of American Society of Mechanical Engineers' Code Cases | U.S. Nuclear Regulatory Commission |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(5)(ii) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(2) | NRC Regulatory Guide 1.147 | 2010 | Inservice Inspection Code Case Acceptability, ASME Section XI, Division 1, Revision 16 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(4)(iii) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(6) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(2) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(4)(ii) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(6)(i) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission | |
Nuclear Regulatory Commission | 88 FR 3287 | 10 CFR 52 | NuScale DCA, Rev. 5 | 2020 | NuScale Small Modular Reactor Design Certification | U.S. Nuclear Regulatory Commission |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(6)(ii) | NRC Regulatory Guide 1.192 | 2003 | Operation and Maintenance Code Case Acceptability, ASME OM Code | U.S. Nuclear Regulatory Commission |