This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.135-15(e)(1)(iii) | ASTM D 2584 | 2008 | Standard Test Method of Ignition Loss for Cured Reinforced Resins | ASTM International | |
Coast Guard | 46 CFR 160.156-5(b)(1) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural Steel, | ASTM International | |
Coast Guard | 33 CFR 96.370(a)(2) | IMO Resolution A.741(18) | 1993 | International Management Code for the Safe Operation of Ships and for Pollution Prevention | International Maritime Organization | |
Coast Guard | 46 CFR 12.05-3(b)(4) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 153.940(a)(2) | ANSI B16.5 | 1988 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Coast Guard | 46 CFR 160.156-13(d)(4) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances, pages 79-254 | International Maritime Organization | |
Coast Guard | 21 CFR 163.5(b) | AOAC Official Methods | 1990 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 56.01-2(e)(13) | ASTM A 194/A 194M | 1998 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service or Both | ASTM International | |
Coast Guard | 46 CFR 162.028-3(e) | MIL-STD-167 | 1963 | Mechanical Vibrations of Shipboard Equipment | U.S. Department of Defense | |
Coast Guard | 46 CFR 116.439(e) | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 56.01-2(e)(1) | ASTM A 36/A 36M | 1997 | Standard Specification for Carbon Structural Steel | ASTM International | |
Coast Guard | 46 CFR 164.120-5(b)(1) | ASTM D 543 | 2006 | Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents | ASTM International | |
Coast Guard | 46 CFR 160.051-7(e) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Coast Guard | 24 CFR 3280.803(k)(3)(ii) | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 182.130 | ABYC H-2 | 1989 | Ventilation of Boats Using Gasoline | American Boat and Yacht Council | |
Coast Guard | 40 CFR 136.3(a) Table IA | EPA Method 2004.0 | 2002 | Methods for Measuring Acute Toxicity to Freshwater and Marine Organisms, Sheepshead Minnow, Cyprinodon variegatus, acute | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 53 | 1998 | Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless | ASTM International | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2)(i) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
Coast Guard | 7 CFR 1755.704(b)(1)(i) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 33 CFR 104.400(b) | IMO Conference Resolution 1 | 2002 | SOLAS Chapter XI-1 or SOLAS Chapter XI-2 | International Maritime Organization | |
Coast Guard | 46 CFR 56.01-2(e)(69) | ASTM F 682 | 2008 | Wrought Carbon Steel Sleeve-Type Pipe Couplings | ASTM International | |
Coast Guard | 46 CFR 52.05-45(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 176.900(a) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 46 CFR 56.15-1(c)(2)(ii) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for the Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 52.01-120(b)(1) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B18.2.2 | 1987 | Square and Hex Nuts (Inch Series) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.176-13(y)(1) | ASTM D 751A | 1965 | Standard Test Methods for Coated Fabrics | ASTM International | |
Coast Guard | 46 CFR 63.25-9(f)(6) | ISO 9096 | 2003 | Stationary source emissions—Manual determination of mass concentration of particulate matter, Second edition | International Organization for Standardization | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B 234 | 1995 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers | ASTM International | |
Coast Guard | 21 CFR 172.869(b)(10) | Food Chemicals Codex | 1997 | Sucrose Fatty Acid Esters | National Academy Press | |
Coast Guard | 46 CFR 199.176(a)(4) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 21 CFR 109.30(d) | FDA Publication | 1979 | Analytical Methodology for Polychlorinated Biphenyls | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 182.470(c) | ABYC H-32 | 1987 | Ventilation of Boats Using Diesel Fuel | American Boat and Yacht Council | |
Coast Guard | 21 CFR 177.1520(b) | ASTM D 3236 | 1988 | Standard Test Method for Apparent Viscosity of Hot Metal Adhesives and Coating Materials | ASTM International | |
Coast Guard | 46 CFR 125.180(b) | ABS Publication | 1983 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 Ft) in Length | American Bureau of Shipping | |
Coast Guard | 33 CFR 127.003(b) | ASME B31.3 | 1993 | Chemical Plant and Petroleum Refinery Piping | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.174-9(d) | Federal Standard 751A | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 177.300(d)(1)(i) | ABS Publication | 1975 | Rules for Building and Classing Aluminum Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 147.45(f)(5) | UL 30 | 1987 | Standard for Metal Safety Cans | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 31.10-1(b) | ABS Publication | 2013 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 57.06-4(h) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 58.01-5 | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels, Part 4 Vessel Systems and Machinery | American Bureau of Shipping | |
Coast Guard | 46 CFR 193.10-10(m)(4) | FedSpec ZZ-H-451E | 1984 | Hose, Fire, Woven-Jacketed Rubber or Cambric-Lined, with Couplings | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 116.300(b)(1)(ii) | ABS Publication | 1975 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 feet) in Length | American Bureau of Shipping | |
Coast Guard | 46 CFR 160.002-4(f) | DWG No. F-49-6-1 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Adult) | U.S. Coast Guard | |
Coast Guard | 46 CFR 114.600(b) | ABYC H-25 | 1994 | Portable Gasoline Fuel Systems for Flammable Liquids | American Boat and Yacht Council | |
Coast Guard | 40 CFR 60.17(g)(192) | ASTM E 168 | 1977 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
Coast Guard | 46 CFR 15.1105(a)(1) | STCW Code | 1978 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.055-1(b) | Drawing No. 160.055-1B, Sheet 2 | 2012 | Life Preservers, Unicellular Foam, Child, Buoyant Inserts, Model 63 | U.S. Coast Guard | |
Coast Guard | 40 CFR 60.485(g)(6) | ASTM D 2382 | 1988 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International |