This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.060-1(a)(4) | 46 CFR 164.013 | 2012 | Foam, Unicellular Polyethylene (Buoyant, Slab, Silted Trigonal Pattern) | U.S. Coast Guard | |
Coast Guard | 46 CFR 162.161-6(c) | UL 2166 | 2001 | Standard for Safety for Halocarbon Clean Agent Extinguishing System Units | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 136.3(a) Table IG (Nabonate [Disodium cyanodithio-imidocarbonate]) | EPA Method 630.1 | 1993 | Dithiocarbamate Pesticides by GC/ELCD | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.040-1(a)(1) | MIL-R-23139B | 1965 | Rocket Motors, Surface Launched, Development and Qualification | U.S. Department of Defense | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(3)(i) | ISO 2039-2:1987(E) | 1987 | Plastics—Determination of hardness—Part 2: Rockwell hardness, Second Edition | International Organization for Standardization | |
Coast Guard | 40 CFR 444.12(b)(1) Table (1) | APHA Method 3114 B | 1992 | Arsenic and Selenium Digestion | American Public Health Association | |
Coast Guard | 33 CFR 127.003(b) | NFPA 30 | 1993 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Coast Guard | 46 CFR 111.33-3(a)(2) | IEC 92-304 | 1995 | Amendment 1 Electrical Installation in Ships, Part 304: Equipment-Semiconductor Convertors | International Electrotechnical Commission | |
Coast Guard | 46 CFR 175.540(d) | IMO Resolution A.741(18) | 1993 | International Management Code for the Safe Operation of Ships and for Pollution Prevention | International Maritime Organization | |
Coast Guard | 46 CFR 54.01-5(g) Table 54.01-5(b) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F 1173 | 1995 | Standard Specification for Thermosetting Resin Fiberglass Pipe and Fittings to be Used for Marine Applications | ASTM International | |
Coast Guard | 46 CFR 111.30-5(a)(1) | IEC 60092-302 | 1997 | Electrical Installation in Ships, Part 302: Low-Voltage Switchgear and Control Gear Assemblies, Fourth Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 30.10-22(b)(Note 1) | ASTM D 323 | 1994 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 96.220(b) | IMO Resolution A.741(18) | 1993 | International Management Code for the Safe Operation of Ships and for Pollution Prevention | International Maritime Organization | |
Coast Guard | 46 CFR 57.02-1(b) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.01-2(e)(68) | ASTM E 23 | 1996 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials | ASTM International | |
Coast Guard | 46 CFR 12.05-3(b)(4) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 197.328(c)(2)(ii) | ASME BPVC VIII 1-2 | 2000 | Boiler and Pressure Vessel Code, Section VIII, Divisions 1 and 2 | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 54.05-1 | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 163.5(b) | AOAC Official Methods | 1990 | Official Methods of Analysis | AOAC International | |
Coast Guard | 24 CFR 3280.801(a) | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 105.10-15(a)(3)(Note) | ASTM D 323 | 1979 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Coast Guard | 46 CFR 121.240(e) | ABYC A-22 | 1993 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Coast Guard | 16 CFR 1203.53(b) | Snell B-90S | 1990 | Standard for Protective Headgear for Use in Bicycling with Supplement | Snell Memorial Foundation | |
Coast Guard | 46 CFR 114.600(b) | NFPA 13 | 1996 | Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 129.380(n) | UL 489 | 1995 | Molded-Case Circuit Breakers and Circuit Breaker Enclosures | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 60.251(c) Bituminous coal | ASTM D 388 | 1991 | Standard Classification of Coals by Rank | ASTM International | |
Coast Guard | 40 CFR 60.435(d)(1) | ASTM D 1475 | 1990 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Coast Guard | 21 CFR 166.110(a) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 154.420(a) | ABS Publication | 1981 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 111.81-1(d) | UL 514C | 1988 | Standard for Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers, Second Edition | Underwriters Laboratories, Inc. | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(G)(2)(v) | EPA-600-4-91-010 | 1991 | Methods for the Determination of Metals in Environmental Samples | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 192/A 192M | 1996 | Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service | ASTM International | |
Coast Guard | 46 CFR 52.05-45(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.024-4(d)(4) | NIST Publication 440 | 1976 | Color: Universal Language and Dictionary of Names | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 110.10-1(o)(7) | UL 514A | 1996 | Metallic Outlet Boxes | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.151-21(z) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 56.01-2(e)(30) | ASTM A 351/A 351M | 1994 | Standard Specification for Castings, Austenitic, Sustenitic-Ferritic (Duplex) for Pressure Containing Parts | ASTM International | |
Coast Guard | 46 CFR 160.060-3(b) | 46 CFR 164.013 | 2012 | Foam, Unicellular Polyethylene (Buoyant, Slab, Silted Trigonal Pattern) | U.S. Coast Guard | |
Coast Guard | 46 CFR 129.410(d) | UL 1573 | 1995 | Stage and Studio Lighting Units | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 182.445(f) | ABYC H-33 | 1989 | Diesel Fuel Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.077-21(c)(4)(ii) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.049-4(b) | Federal Standard 751A | 1977 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 110.10-1(b)(1) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 160.176-4(b) | ASTM D 1434 | 1988 | Standard Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting | ASTM International | |
Coast Guard | 21 CFR 172.869(b)(10) | Food Chemicals Codex | 1997 | Sucrose Fatty Acid Esters | National Academy Press | |
Coast Guard | 46 CFR 160.133-7(b)(3) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Coast Guard | 46 CFR 160.151-15(h) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.135-11(c)(2)(i)(A) | MIL-R-21607E(SH) | 1990 | Military Specification, Resins, Polyester, Low Pressure Laminating, Fire-Retardant | U.S. Department of Defense |