Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(n)(1) |
COS Safety Publication COS-2-01 |
2012 |
Qualification and Competence Requirements for Audit Teams and Auditors Performing Third-party SEMS Audits of Deepwater Operations, First Edition
|
Center for Offshore Safety |
Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(70) |
API RP 14FZ |
2013 |
Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.901(a)(18) |
ASTM C330-05 |
2005 |
Standard Specification for Lightweight Aggregates for Structural Concrete
|
ASTM International |
Safety and Environmental Enforcement Bureau |
84 FR 21977 |
30 CFR 250.730 (d) |
ISO/IEC 17021-1 |
2015 |
Conformity assessment—Requirements for bodies providing audit and certification of management systems—Part 1: Requirements
|
International Organization for Standardization |
Safety and Environmental Enforcement Bureau |
83 FR 49262 |
30 CFR 250.880(c)(4)(iii) |
API STD 6AV2 |
2014 |
Installation, Maintenance, and Repair of Surface Safety Valves and Underwater Safety Valves Offshore
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(27) |
API MPMS |
2005 |
Chapter 9, Section 1
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(62) |
API RP 14J |
2007 |
Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(22) |
API MPMS |
2005 |
Chapter 5—Metering
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(86) |
ANSI/API Spec. 11D1 |
2009 |
Packers and Bridge Plugs
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
84 FR 24705 |
30 CFR 250.842(a)(1)(v) |
API RP 500 |
2012 |
Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.1903 |
COS Safety Publication COS-2-03 |
2012 |
Requirements for Third-party SEMS Auditing and Certification of Deepwater Operations, First Edition
|
Center for Offshore Safety |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(8) |
API MPMS |
2005 |
Chapter 3, Section 1A
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.108(c) |
API Spec. 2C |
2004 |
Specifications for Offshore Cranes
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(39) |
API MPMS |
1980 |
Chapter 11.1—Volume Correction Factors, Volume 1, Table 5A—Generalized Crude Oils and JP-4 Correction of Observed API Gravity to API Gravity at 60 °F, and Table 6A—Generalized Crude Oils and JP-4 Correction of Volume to 60 °F Against API Grav...
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(g)(1) |
ASTM C33-07 |
2007 |
Standard Specification for Concrete Aggregates
|
ASTM International |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.856(a) |
API RP 14C |
2001 |
Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.806(a)(2)(i) |
ASME SPPE-1d |
1996 |
Addendum to Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations
|
American Society of Mechanical Engineers |
Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(d)(1) |
ANSI/ASME B16.5-2003 |
2003 |
Pipe Flanges and Flanged Fittings
|
American National Standards Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(39) |
API MPMS |
2003 |
Chapter 14, Section 3, Part 1
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.901(a)(19) |
ASTM C595 |
2008 |
Blended Hydraulic Cements
|
ASTM International |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.415(f) |
API Standard 65 |
2010 |
Part 2, Isolating Potential Flow Zones During Well Construction, Second Edition
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(55) |
API MPMS |
1998 |
Chapter 21—Flow Measurement Using Electronic Metering Systems, Section 2—Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.800(b) |
API RP 14J |
2001 |
Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
83 FR 49259 |
30 CFR 250.872 (a) |
API RP 500 |
2012 |
Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.901(a)(7) |
API RP 2A-WSD |
2007 |
Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.1903 |
COS Safety Publication COS-2-01 |
2012 |
Qualification and Competence Requirements for Audit Teams and Auditors Performing Third-party SEMS Audits of Deepwater Operations, First Edition
|
Center for Offshore Safety |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(g)(6) |
ASME SPPE-1 |
1994 |
Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations
|
American Society of Mechanical Engineers |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.901(a)(5) |
API Bulletin 2INT-EX |
2007 |
Interim Guidance for Assessment of Existing Offshore Structures for Hurricane Conditions
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(n)(2) |
COS Safety Publication COS-2-03 |
2012 |
Requirements for Third-party SEMS Auditing and Certification of Deepwater Operations, First Edition
|
Center for Offshore Safety |
Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(7) |
API MPMS |
1994 |
Chapter 1—Vocabulary
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(71) |
API RP 14G |
2007 |
Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.901(a)(19) |
ASTM C595-08 |
2008 |
Standard Specification for Blended Hydraulic Cements
|
ASTM International |
Safety and Environmental Enforcement Bureau |
84 FR 21979 |
30 CFR 250.733(b)(2) |
API RP 2RD |
1998 |
Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs)
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.901(d)(4) |
API Bulletin 2INT-EX |
2007 |
Interim Guidance for Assessment of Existing Offshore Structures for Hurricane Conditions
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(28) |
API MPMS |
2003 |
Chapter 9, Section 2
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(55) |
API RP 14B |
2005 |
Recommended Practice for Design, Installation, Repair, and Operation of Subsurface Safety Valve Systems
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(23) |
API MPMS |
2005 |
Chapter 5—Metering
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(87) |
ANSI/API Spec. 14A |
2005 |
Specification for Subsurface Safety Valve Equipment
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(88) |
ANSI/API Spec. 16A |
2004 |
Specification for Drill-through Equipment
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
84 FR 24705 |
30 CFR 250.842(a)(1)(v) |
API RP 505 |
1997 |
Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.108(d) |
API Spec. 2C |
2004 |
Specifications for Offshore Cranes
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(40) |
API MPMS |
1986 |
Chapter 11.2.2—Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 °F/60 °F) and −50 °F to 140 °F Metering Temperature
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(g)(2) |
ASTM C94/C 94M-07 |
2007 |
Standard Specification for Ready-Mixed Concrete
|
ASTM International |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.858(a) |
API RP 14C |
2001 |
Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(35) |
API MPMS |
2007 |
Chapter 11.2.2
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(d)(2) |
ANSI/ASME B31.8-2003 |
2003 |
Gas Transmission and Distribution Piping Systems
|
American National Standards Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(40) |
API MPMS |
2006 |
Chapter 14, Section 3, Part 2
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.901(a)(20) |
AWS D1.1 |
2000 |
Structural Welding Code--Steel
|
American Welding Society |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(79) |
API RP 75 |
2008 |
Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities, Third Edition
|
American Petroleum Institute |
Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(56) |
API MPMS |
2006 |
Chapter 21—Flow Measurement Using Electronic Metering Systems, Addendum to Section 2—Flow Measurement Using Electronic Metering Systems, Inferred Mass
|
American Petroleum Institute |