DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 182.440(a)(2)(i) | ASTM D 635 | 1997 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position | ASTM International | |
Coast Guard | 46 CFR 175.600(b) Table | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 52.01-120(d)(1) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B36.19M | 2004 | Stainless Steel Pipe | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 199.175(b)(12) | ASTM F 1014 | 1992 | Standard Specification for Flashlights on Vessels | ASTM International | |
Coast Guard | 46 CFR 76.01-2(c)(1) | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 24 CFR 3280.203(a) | ASTM E 84 | 2001 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Coast Guard | 46 CFR 170.270(c)(1) | ASTM F 1196 | 1994 | Standard Specification for Sliding Watertight Door Assemblies | ASTM International | |
Coast Guard | 46 CFR 199.280(e)(3) | IMO Resolution MSC.5(48) | 1993 | International Code for the Construction and Equipment of Ships carrying Liquefied Gases in Bulk, (IGC Code) | International Maritime Organization | |
Coast Guard | 46 CFR 28.40(b) | ASTM F 1321 | 1992 | Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine Light Ship Displacement and Centers of Gravity of a Vessel | ASTM International | |
Coast Guard | 46 CFR 54.25-3 | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 60.261(s) Silvery iron | ASTM A 100 | 1974 | Standard Specification for Ferrosilicon | ASTM International | |
Coast Guard | 46 CFR 32.20-10 | ASTM F 1273 | 2007 | Standard Specification for Tank Vent Flame Arresters | ASTM International | |
Coast Guard | 46 CFR 54.25-10(c) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 110.10-1(g)(20) | IEC 92-303 | 1980 | Electrical Installation in Ships, Part 303: Equipment-Transformers for Power and Lighting, Third Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 52.05-1(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 110.10-1(g)(30) | IEC 60947-2 | 2003 | Low-Voltage Switchgear and Controlgear Part 2: Circuit-Breakers, Third Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 125.180(b) | ANSI B31.1 | 1989 | Code for Pressure Piping, Power Piping | American National Standards Institute | |
Coast Guard | 40 CFR 60.335(a)(5) | EPA Method 20 | 1986 | Source Assessment Sampling System (SASS) | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 114.600(b) | UL 1453 | 1994 | Electric Booster and Commercial Storage Tank Water Heaters | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 148.8(b)(1) | IMSBC Code | 2009 | International Maritime Solid Bulk Cargoes Code and Supplement | International Maritime Organization | |
Coast Guard | 46 CFR 56.20-15(c) | ISA S75.02 | 1996 | Control Valves | International Society for Measurement and Control | |
Coast Guard | 46 CFR 160.005-1(b) | Drawing No. 160.005-1 (Sheet 4) | 2012 | Cutting Pattern and General Arrangement (Child) | U.S. Coast Guard | |
Coast Guard | 21 CFR 176.170(a)(5) | ASTM D 1545 | 1981 | Standard Method of Test for Viscosity of Transparent Liquids by Bubble Time Method | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(48) | ASTM B 68 | 1995 | Standard Specification for Seamless Copper Tube, Bright Annealed | ASTM International | |
Coast Guard | 46 CFR 160.047-4(b) | Drawing No. 160.047-1, Sheet 1, Rev. 2 | 2012 | Buoyant Vest, Kapok or Fibrous Glass, Adult and Child--Cutting Pattern and General Arrangement, Models AK-1, and AF-1 | U.S. Coast Guard | |
Coast Guard | 46 CFR 58.60-7 | ANSI B31.3 | 1987 | Chemical Plant and Petroleum Refinery Piping | American National Standards Institute | |
Coast Guard | 46 CFR 54.15-10(h)(1) | CGA S-1.2.5.2 | 1979 | Flow Test of Safety Relief Valves | Compressed Gas Association | |
Coast Guard | 46 CFR 160.055-3(c) | Standard Color Reference of America | 2014 | Indian Orange, Cable No. 70072 | Textile Color Association of the United States | |
Coast Guard | 46 CFR 111.105-1 | IEC 60079-0 | 2000 | Electrical apparatus for Explosive Gas Atmospheres—Part 0: General Requirements (Edition 3.1) | International Electrotechnical Commission | |
Coast Guard | 46 CFR 39.1005(g)(1) | NEMA Publication WD-6 | 1988 | Wiring Devices, Dimensional Requirements | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 160.077-11(c)(1)(ii) | UL 1191 | 2013 | Standard for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 111.105-1 | IEC 79-18 | 1992 | Electrical Apparatus for Explosive Gas Atmospheres—Part 18: Encapsulation “m”, First Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 111.33-11 | ABS Publication | 2001 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Coast Guard | 46 CFR 160.048-1(a)(3) | Federal Standard 751 | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.132-5(b)(1) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural Steel | ASTM International | |
Coast Guard | 27 CFR 21.65(b)(1) 244 | The United States Pharmacopoeia | 1980 | Formula No. 38-B | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 177.300(d)(1) | Lloyd's Publication | 1998 | Rules and Regulations for the Classification of Yachts and Small Craft | Lloyd's Register of Shipping | |
Coast Guard | 46 CFR 8.110(b) | Lloyd's Publication | 1998 | Rules and Regulations for the Classification of Ships | Lloyd's Register of Shipping | |
Coast Guard | 40 CFR 136.3(a) Table IB (34) | ASTM D 858A | 2007 | Standard Test Methods for Manganese in Water, Atomic Absorption, Direct | ASTM International | |
Coast Guard | 46 CFR 164.023-11(b)(1) | Federal Standard 191A | 1978 | Method 4010, Length-Weight Relation; Thread; Yards Per Pound (m/kg) | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.135-5(d)(5) | IMO MSC/Circular 980 | 2001 | Standardized life-saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-21(o) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 15.1103(f) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 46 CFR 160.022-1(a)(2) | NIST Report 4792 | 1956 | Development of a Laboratory Test for Evaluation of the Effectiveness of Smoke Signals | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 31.10-45(a) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-15(i) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-5(e)(3) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
Coast Guard | 33 CFR 155, Appendix A | ANSI B16.5 | 1981 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Coast Guard | 21 CFR 131.150(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International |