This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 147.2500(a)(3) | WIUIC regulations | 1982 | Chapter NR 113, Servicing Septic Tanks, Seepage Pits, Grease Traps or Privies, Wisconsin Administrative Code §§ NR 113.07-113.08 (1979), as amended by Natural Resources Board Order No. WQ-25-82. | State of Wisconsin | |
Environmental Protection Agency | 40 CFR 300.915(c)(11) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 178.3870(f)(3) | ASTM D 465 | 1982 | Standard Test Method of Test for Acid Number of Rosin | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(e) | ASTM E 871 | 1982 | Standard Method of Moisture Analysis of Particulate Wood Fuels | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 971 | 1982 | Duct-work Insulation | ASTM International | |
Coast Guard | 33 CFR 154, Appendix A, 8.4 | ASTM F 722 | 1982 | Standard Specification for Welded Joints for Shipboard Piping Systems | ASTM International | |
Food and Drug Administration | 21 CFR 172.210(b)(2) | ASTM D 566 | 1982 | Standard Test Method for Dropping Point of Lubricating Grease | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (41) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (55) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (77) | EPA Method 604 | 1982 | Phenols by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (5) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 971 | 1982 | Duct-work Insulation | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (44) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 79a | 1982 | Acrylonitrile Butadiene Styrene (ABS) and Poly Vinyl Chloride (PVC) Plastic Drain, Waste and Vent Pipe and Fittings | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (59) | EPA Method 610 (HPLC) | 1982 | Polynuclear Hydrocarbons by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (80) | EPA Method 604 | 1982 | Phenols by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (100) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 763 Appendix A (II)(J)(3) | N.B.S. Special Publication 619 | 1982 | Asbestos Standards: Materials and Analytical Methods, Small, John and E. Steel | National Institute of Standards and Technology, U.S. Department of Commerce | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-530B | 1982 | Insulation Board, Thermal, Unfaced, Polyurethane or Polyisocyanurate | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (1) | EPA Method 610 (HPLC) | 1982 | Polynuclear Hydrocarbons by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(g)(202) | ASTM E 871 | 1982 | Standard Method of Moisture Analysis of Particulate Wood Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (20) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (48) | EPA Method 606 | 1982 | Phthalate Esters by GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (22) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 177.1350(b)(2) | ASTM D 1238 | 1982 | Standard Method of Measuring Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC Footnote 5 | EPA Method 607 | 1982 | Nitrosamines by GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (84) | EPA Method 607 | 1982 | Nitrosamines by GC/NPD | U.S. Environmental Protection Agency | |
Agricultural Marketing Service | 7 CFR 28.303(c) | ASTM D 1440 | 1982 | Standard Test Method for Length and Length Distribution of Cotton Fiber (Array Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (10) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (37) | EPA Method 602 | 1982 | Purgeable Aromatics by GC/PID Purge & Trap | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 164.023-5 Table 164.023-5(a) | MIL-T-43624A | 1982 | Thread, Polyester, Spun | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 147.500(b)(2) | FLUIC regulations | 1982 | Florida Administrative Code, Chapter 17-1 (1982) (Administrative Procedures Act) | State of Florida | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (25) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 177.1520(d)(2)(ii) | ASTM E 28 | 1982 | Standard Test Method for Softening Point by Ring and Ball Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (74) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (90) | EPA Method 608 | 1982 | Organochlorine Pesticides & PCBs by GC/ECD | U.S. Environmental Protection Agency | |
Coast Guard | 21 CFR 177.1430(c)(1) | ASTM D 2503 | 1982 | Standard Method of Test for Molecular Weight of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure | ASTM International | |
Food and Drug Administration | 21 CFR 178.3620(d)(1)(i) | ASTM D 86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(95) | ASTM E 871 | 1982 | Standard Method of Moisture Analysis of Particulate Wood Fuels | ASTM International | |
Coast Guard | 33 CFR 154, Appendix A, 8.6 | ASTM F 722 | 1982 | Standard Specification for Welded Joints for Shipboard Piping Systems | ASTM International | |
Food and Drug Administration | 21 CFR 172.215(b)(1) | ASTM E 28 | 1982 | Standard Test Method for Softening Point by Ring and Ball Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (41) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 175.300(b)(3)(xxxiii) | ASTM D 2503 | 1982 | Standard Method of Test for Molecular Weight of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (29) | EPA Method 612 | 1982 | Chlorinated Hydrocarbons GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (111) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.4.1 | DOE IDO-12096 | 1982 | RESL Analytical Chemistry Branch Procedures Manual | U.S. Department of Energy | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (40) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (5) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (80) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(13) | ASTM D 3972 | 1982 | Standard Test Method for Isotopic Uranium in Water by Radiochemistry | ASTM International |