This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 1065.1010(b)(23) | ASTM D 2784 | 2011 | Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) | ASTM International | |
Energy Department | 87 FR 55090 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Battery Chargers | International Electrotechnical Commission |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (viii) | Drawing No. 420-7000-2 | 2011 | Complete Arm Assembly, right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 86.113-94(b)(2) | ASTM D 4052 | 2011 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter | ASTM International | |
Federal Communications Commission | 88 FR 67108 | 47 CFR 2 | ETSI EN 300 422–1 V1.4.2 (2011– 08) | 2011 | Updating References to Standards Related to the Commission's Equipment Authorization Program | European Telecommunications Standards Institute |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(e) | ASTM D 4057 | 2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.97(a)(3)(ii) | ANSI Z535.1 | 2011 | Safety colors | American National Standards Institute | |
Energy Department | 85 FR 56475 | 10 CFR 429 and 430 | IEC 62301 2011 | 2011 | Energy Conservation Program: Test Procedure for Fluorescent Lamp Ballasts | International Electrotechnical Commission |
National Highway Traffic Safety Administration | 49 CFR 572.176(a) | Drawing No. 420-5000 | 2011 | Complete leg assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.10(f)(6) | DICOM Standard PS 3.14-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 14: Grayscale Standard Display Function | National Electrical Manufacturers Association | |
Environmental Protection Agency | 40 CFR 63.14(g)(7) | ASTM D 975 | 2011 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(a) | ASTM D 7430 | 2011 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 435.11(ee) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.41(mm) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Energy Department | 88 FR 31102 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Portable Air Conditioners | International Electrotechnical Commission |
Coast Guard | 45 CFR 162.920(c)(3)(iii) | CAQH Publication | 2011 | Phase II CORE 259: Eligibility and Benefits 270/271 AAA Error Code Reporting Rule, version 2.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(3) | NHTSA Publication | 2011 | Procedures for Assembly, Disassembly and Inspection (PADI) of the Hybrid III 10-Year-Old Child Test Dummy (HIII-10C) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(2) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Nuclear Regulatory Commission | 87 FR 65128 | 10 CFR 50 | ASME NQA–1b–2011 | 2011 | American Society of Mechanical Engineers 2019-2020 Code Editions | American Society of Mechanical Engineers |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(d) | ASTM D 5864 | 2011 | Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components | ASTM International | |
Environmental Protection Agency | 40 CFR 435.13 Note 10 | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.15 Note 11 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.6(b)(4)(v) | EPA Method 200.2 | 2012 | Methods for the Determination of Metals in Environmental Samples | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.200(e)(17) | RUS Bulletin 345-63 | 2012 | RUS Specification for Acceptance Tests and Measurements of Telephone Plant, PC–4 | Rural Utilities Service, U.S. Department of Agriculture | |
Minerals Management Service | 30 CFR 250.1904(c) | COS Safety Publication COS-2-03 | 2012 | Requirements for Third-party SEMS Auditing and Certification of Deepwater Operations, First Edition | Center for Offshore Safety | |
Safety and Environmental Enforcement Bureau | 84 FR 21981 | 30 CFR 250.735(a) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 80 | SAE J1025_201208 | 2012 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 1051.501(d)(2)(ii) | 40 CFR 1051.515(b) | 2012 | Permeation test run | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.077-19(c)(8) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Labor Department | 41 CFR 50-204.2(a)(3) | 49 CFR 174 | 2012 | Carriage by Rail | U.S. Department of Transportation | |
Rural Utilities Service | 7 CFR 1755.505(c) | 7 CFR 1755.200 | 2012 | Splicing copper and fiber optic cables | Rural Utilities Service, U.S. Department of Agriculture | |
Coast Guard | 46 CFR 160.005-3(b) | Standard Color Reference of America | 2012 | Indian Orange, Cable No. 70072 | Textile Color Association of the United States | |
Interior Department | 84 FR 24705 | 30 CFR 250 | API RP 500 | 2012 | Oil and Gas and Sulphur Operations on the Outer Continental Shelf-Oil and Gas Production Safety Systems; Corrections | American Petroleum Institute |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant resin (2) | UL 1316 | 2012 | Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.060-1(b) | Drawing No. 160.060-1, Sheet 6 | 2012 | Buoyant Vest, Unicellular Polyethylene Foam, Adult and Child, Insert Pattern, Model CYS | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.077-21(c)(4)(i) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Food and Drug Administration | 21 CFR 178.3780(b)(2) | AOCS Method Trla-64T | 2012 | Titer Test | AOAC International | |
Coast Guard | 46 CFR 160.052-1(b) | Drawing No. 160.052-1, Sheet 1 | 2012 | Buoyant Vest, Unicellular Plastic Foam, Adult and Child, Cutting Pattern and General Arrangement, Model AP | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.047-1(b) | Drawing No. 160.047-1, Sheet 3, Rev. 2 | 2012 | Buoyant Vest, Kapok or Fibrous Glass, Adult and Child—Cutting Pattern and General Arrangement, Models CKS-1 and CFS-1 | U.S. Department of Defense | |
Coast Guard | 46 CFR 161.006-4(k) | NSSC 42S5 | 2012 | Screws, machine, cap and set, and nuts | Navy Supply Systems Command | |
Environmental Protection Agency | 88 FR 10468 | 40 CFR 770 | ANSI A135.4–2012 | 2012 | Voluntary Consensus Standards Update; Formaldehyde Emission Standards for Composite Wood Products | American National Standards Institute |
National Institute of Standards and Technology | 15 CFR 200.109(h) | NIST SP 250 | 2012 | Calibration and Related Measurement Services of the National Institute of Standards and Technology | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 63.14(g)(12) | ASTM D 1475 | 2012 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Mine Safety and Health Administration | 30 CFR 56.12048 | NFPA 70 | 2012 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 59 | SAE J1025_201208 | 2012 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Coast Guard | 46 CFR 160.002-4(b) | DWG No. F-49-6-5 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Child) | U.S. Coast Guard | |
Coast Guard | 46 CFR 162.027-3(a) | ASTM F 1546 | 2012 | Standard Specification for Firehose Nozzles | ASTM International | |
Coast Guard | 46 CFR 160.052-5(b) | Drawing No. 160.052-1, Sheet 2 | 2012 | Buoyant Vest, Unicellular Plastic Foam, Adult and Child, Cutting Pattern and General Arrangement, Model CPM | U.S. Coast Guard | |
Environmental Protection Agency | 40 CFR 600.113-12(f)(1)(i) | ASTM D 1298 | 2012 | Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(17) | ASTM A 214/A 214M | 2012 | Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes | ASTM International |