This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | IEEE 1580–2010 | 2010 | Update to Electrical Engineering Regulations | Institute of Electrical and Electronics Engineers |
Environmental Protection Agency | 40 CFR 1066.305 | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.102 (b)(i) | ANSI/ISEA Z87.1-2010 | 2010 | Occupational and Educational Personal Eye and Face Protection Devices | American National Standards Institute | |
Coast Guard | 46 CFR 56.01-2(e)(78) | ASTM F 1199 | 2010 | Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150 Degrees F Maximum) | ASTM International | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 85 | SAE J1711_201006 | 2010 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 16 | Colilert-18® Method | 2010 | Coliform/E. coli detection kit | IDEXX Laboratories | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM D 178 | 2010 | Standard Specification for Rubber Insulating Matting | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(o)(1) | TAPPI Method T624 | 2011 | Gross Heating Value of Black Liquor | Technical Association of the Pulp and Paper Industry | |
Energy Department | 87 FR 63588 | 10 CFR 429 | IEEE 114–2010 | 2011 | Energy Conservation Program: Test Procedure for Electric Motors | Institute of Electrical and Electronics Engineers |
National Highway Traffic Safety Administration | 49 CFR 572.172(a) | Drawing No. 420-383X | 2011 | Structural replacement | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(7) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.173(b)(2)(iii) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63.7575 Biodiesel | ASTM D 6751 | 2011 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 435.11(d) | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(f) | ASTM D 3683 | 2011 | Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1211.40 (b)(1) | ANSI/DASMA 102 | 2011 | Specifications for Sectional Doors | American National Standards Institute | |
Food Safety and Inspection Service | 45 CFR 162.920(d)(1) | NACHA Publication | 2011 | 2011 NACHA Operating Rules & Guidelines, A Complete Guide to the Rules Governing the ACH Network, NACHA Operating Rules, Appendix One: ACH File Exchange Specifications (Operating Rule 59) | National Automated Clearing House Association | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(13) | ASTM D 1837 | 2011 | Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.176(b) | Drawing No. 420-5200 | 2011 | Lower upper leg assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 86.113-94(b)(2) | ASTM D 4052 | 2011 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(e) | ASTM D 4057 | 2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Coast Guard | 45 CFR 162.920(c)(3)(iv) | CAQH Publication | 2011 | Phase II CORE 260: Eligibility & Benefits Data Content (270/271) Rule, version 2.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Energy Department | 85 FR 56475 | 10 CFR 429 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Fluorescent Lamp Ballasts | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 435.13 Note 11 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(23) | ASTM D 2784 | 2011 | Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1(g)(22) | SAE J-2064 | 2011 | R134a Refrigerant Automotive Air-Conditioned Hose | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(2) | Drawing No. 420-2070 | 2011 | Lower neck bracket assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 435.13 Note 10 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Energy Department | 87 FR 18261 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Microwave Ovens | International Electrotechnical Commission |
Coast Guard | 40 CFR 1065.720 Table 1 | ASTM D 1837 | 2011 | Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(7) | Drawing No. 420-4000 | 2011 | Lower Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(a) | ASTM D 7430 | 2011 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 435.15 Note 9 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 63.14(g)(76) | ASTM D 6357 | 2011 | Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively Coupled Plasma MS, Graphite Furnace Atomic Absorption Spectrometry | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.97(b) Note to paragraph (b) | ASTM F 712 | 2011 | Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers | ASTM International | |
Environmental Protection Agency | 85 FR 78412 | 40 CFR 1042 | ASTM D4052–11 | 2011 | Fuels Regulatory Streamlining | ASTM International |
Federal Motor Carrier Safety Administration | 49 CFR 384.225(f) | CDLIS | 2011 | Commercial Driver's License Information System (CDLIS) State Procedures Manual, Release 5.2.0 | American Association of Motor Vehicle Administrators, Inc. | |
Energy Department | 85 FR 50757 | 10 CFR 430 | IEC 62301 Ed. 1.0 b:2005 | 2011 | Energy Conservation Program: Test Procedures for Cooking Products | International Electrotechnical Commission |
Federal Trade Commission | 92 FR 20788 | 16 CFR 460.5 (e)(2)(viii) | ASTM C 1363-11 | 2011 | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus | ASTM International |
National Highway Traffic Safety Administration | 49 CFR 572.173(c)(2) | Drawing No. 420-2000 | 2011 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Food and Drug Administration | 21 CFR 178.3870(f)(6)(iv) | FDA Publication | 2011 | Determination of Phenolic Modification of Rosin Derivatives | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 63.7575 Distillate oil | ASTM D 975 | 2011 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 435.11(d) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(66) | ANSI Z535.1 | 2011 | Safety Colors | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(2) | ANSI Z535.1 | 2011 | Specification of the Safety Colors for CIE Illuminate C and the CIE 1931, 2 Standard Observer | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.73a(c)(2)(ii) | ASTM E 1584 | 2011 | Standard Test Method for Assay of Nitric Acid 2011 EPA/AP | ASTM International | |
Environmental Protection Agency | 40 CFR 435.11(gg) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Coast Guard | 45 CFR 162.1203(a)(5) | CAQH Publication | 2011 | Phase I CORE 156: Eligibility and Benefits Real Time Response Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Environmental Protection Agency | 40 CFR 435.15 Note 11 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(2) | Drawing No. 420-2000 | 2011 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation |