This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/SDI A123.1 | 1982 | Nomenclature for Steel Doors and Steel Door Frames | Steel Door Institute | |
Rural Utilities Service | 7 CFR 1755.890(i)(8) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 33 CFR 164.74(a)(3)(ii) | ASTM D4268 | 1993 | Standard Test Method for Testing Fiber Ropes | ASTM International | |
Environmental Protection Agency | 40 CFR 260.11(c)(3)(i) | EPA Method 0010 | 1986 | Modified Method 5 Sampling Train | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.25(c) | SAE J-585 | 2000 | Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less Than 2032 mm in Overall Width | Society of Automotive Engineers | |
Coast Guard | 46 CFR 52.01-140(d) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (44) | USGS I-4601-85 | 1985 | Phosphorus, orthophosphate, total, colorimetric, phosphomolybdate, automated-segmented flow | U.S. Geological Survey | |
Food and Drug Administration | 21 CFR 101.9(c)(7)(ii) | FAO/WHO Publication | 1990 | Protein Quality Evaluation Report | Food and Agricultural Organization of the United Nations | |
National Highway Traffic Safety Administration | 49 CFR 572.137(j) | Drawing No. 880105-300 | 2000 | Upper Torso Assembly | Reprographic Technologies | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | WQA S-400 | 1986 | Point-of-Use Distillation Drinking Water Systems | Water Quality Association | |
Energy Department | 10 CFR 434.403.1 Table 403.1b | ARI 340/360 | 2004 | Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment (RS-16) | Air Conditioning and Refrigeration Institute | |
Coast Guard | 46 CFR 160.151-15(k) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1043.60(d) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI, Regulation 13 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 608.1 | 1993 | The Determination of Organochlorine Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 86.095-35(h)(2)(i) | SAE J-1877 | 1994 | Recommended Practice for Bar-Coded Vehicle Identification Number Label | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM F819 | 2010 | Standard Terminology Relating to Electrical Protective Equipment for Workers | ASTM International | |
Environmental Protection Agency | 40 CFR 147.2201(b)(3) | TXUIC regulations | 1980 | General Rules of Practice and Procedure, Subchapters A-J (Railroad Commission of Texas, adopted November 24, 1975, revised December 1980) | State of Texas | |
Environmental Protection Agency | 40 CFR 63.11237 Biodiesel | ASTM D6751 | 2011 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.67(b)(2) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Coast Guard | 46 CFR 108.497(b) | ASTM F1014 | 1992 | Standard Specification for Flashlights on Vessels | ASTM International | |
Coast Guard | 46 CFR 108.101(b) | ASTM D93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. M, 2.10.2 | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 113.25-11(a) | NEMA Publication 250 | 2001 | Enclosures for Electrical Equipment (1000 Volts Maximum) | National Electrical Manufacturers Association | |
National Highway Traffic Safety Administration | 49 CFR 571.214 S12.1.2(b)(2) | Drawing No. 78051-532 | 1996 | Pelvic Angle Gauge | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (1) | APHA Method 6410 B | 1995 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Food and Drug Administration | 21 CFR 178.3740(b) | ASTM D1492 | 1978 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.262(h)(1)(i) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 119.440(a)(2)(ii) | UL 1102 | 1992 | Non Integral Marine Fuel Tanks | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.74(a) | Drawing No. SA 106C 001 | 1997 | Specifications for an Anthropomorphic Test Dummy Representing a 6-year-old Child, sheet 11 | Reprographic Technologies | |
Coast Guard | 46 CFR 56.50-105 Table | ASTM A350/A 350M | 1997 | Standard Specification for Forgings, Carbon and Low-Alloy Steel, Requiring Notch Toughness Testing for Piping Components | ASTM International | |
National Science Foundation | 45 CFR 605.23(c) | UFAS | 1991 | Uniform Federal Accessibility Standards | Federal Specifications Standards and Test Methods | |
Research and Special Programs Administration | 49 CFR 178.58(d)(1) | CGA C-3 | 1994 | Standard for Welding and Brazing on Thinned Walled Containers | Compressed Gas Association | |
Food and Drug Administration | 21 CFR 184.1007(b)(7) | Food Chemicals Codex | 1996 | Aconitic Acid | National Academy Press | |
Health and Human Services Department | 45 CFR 162.920(a)(6) | ASC X12N 820 | 2002 | Addenda to Payroll Deducted and Other Group Premium Payment for Insurance Products, Version 4010 | Washington Publishing Company | |
Geological Survey | 30 CFR 401.12(c)(1)(i) | OMB Circular No. A-21 | 2004 | Cost Principles of Educational Institutions | U.S. Office of Management and Budget | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (89) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table (Total Chlorine) | ASTM D1253 | 2003 | Standard Test Method for Residual Chlorine in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 61.04(c)(1)(ii) | NH State Regulations, Env-A 1800 | 2008 | Asbestos Management and Control, Sections 1801-1807, excluding the following provisions: 1801.02(e), 1802.02, 1802.04, 1802.07-1802.09, 1802.13, 1802.15-1802.17, 1802.28-1802.29, 1802.36, 1802.42, 1802.45, 1802.50, 1802.54, 1804.05-1804.09, and 1807.02 | State of New Hampshire | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (23) Silica | APHA Method 4500-SiO2 D | 1995 | Silica, Dissolved, Heteropoly Blue Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.251(k) Lignite | ASTM D388 | 1991 | Standard Classification of Coals by Rank | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 500 | 2012 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 60.111a(g) Reid vapor pressure | ASTM D323 | 1994 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM C564 | 1988 | Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings | ASTM International | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(11)(iii) | EPA-600-4-79-020 | 1983 | Method 353.2--Colorimetric automated, cadmium reduction | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.902(a)(2) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.633(h)(1) | ASTM D86 | 1995 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Animal and Plant Health Inspection Service | 7 CFR 300.5(a) | UNFAO Publication No. 4 | 1996 | Requirements for the Establishment of Pest Free Areas | United Nations' Food and Agriculture Organization | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S4.2.2 | SAE J-903 | 1966 | Passenger Car Windshield Wiper Systems | Society of Automotive Engineers | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 9 | ASTM B283 | 1996 | Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed) | ASTM International |