Energy Department |
|
10 CFR 431.96 (g)(2) |
AHRI 310/380-2014 |
2014 |
Standard for Packaged Terminal Air-Conditioners and Heat Pumps
|
Air Conditioning, Heating, and Refrigeration Institute |
Food and Drug Administration |
|
21 CFR 131.112(e)(2) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
Health and Human Services Department |
|
45 CFR 162.920(b)(2) |
NCPDP Publication |
2000 |
Batch Standard Batch Implementation Guide, Version 1, Release 1 (Version 1.1)
|
National Council for Prescription Drug Programs |
Coast Guard |
|
46 CFR 160.170-13(g)(1) |
IMO MSC/Circular 980 |
2001 |
Standardized Life-saving Appliance Evaluation and Test Report Forms
|
International Maritime Organization |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (19) |
ASTM D4190 |
2008 |
Metals by Direct Current Plasma
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 141.21(f)(3) |
APHA Method 9222 C |
1997 |
Delayed-Incubation Total Coliform Procedure
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 799.5089(j) Table 3, C3 |
ASTM E1193 |
1997 |
Standard Guide for Conducting Daphnia Magna Life-Cycle Toxicity Tests
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 80.46(c)(1) |
ASTM D5191 |
2013 |
Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Simazine) |
EPA Method 525.2 |
1995 |
Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 300.915(b)(10) |
EPA Method 601 |
1982 |
Purgeable Halocarbons
|
U.S. Environmental Protection Agency |
National Highway Traffic Safety Administration |
|
49 CFR 572.113 |
Drawing No. 78051-61X |
1997 |
Head Assembly, Complete, revision C
|
General Motors Corporation |
Coast Guard |
|
46 CFR 183.380(m) |
UL 489 |
1991 |
Molded-Case Circuit Breakers and Circuit Breaker Enclosures
|
Underwriters Laboratories, Inc. |
Rural Utilities Service |
|
7 CFR 1755.506(d) |
7 CFR 1755.510 |
2012 |
Construction and assembly unit drawings
|
Rural Utilities Service, U.S. Department of Agriculture |
Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart L Appendix B 1910.162 |
ANSI/NFPA 12A |
2014 |
Halon 1211 Systems
|
National Fire Protection Association |
Coast Guard |
|
46 CFR 111.105-1 |
IEC 60079-1 |
2001 |
Electrical Apparatus for Explosive Gas Atmospheres—Part 1: Flameproof Enclosures “d” including corr.1, Fourth Edition
|
International Electrotechnical Commission |
Research and Special Programs Administration |
|
40 CFR 136.3(a) Table IB (11) |
EPA Method 300.0 |
1993 |
Ion chromatography - anions, Revision 2.1
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 94.5(a)(10) |
ASTM E29 |
2002 |
Standard Recommended Practice for Indicating Which Places of Figures Are to Be Considered Significant in Specified Limiting Values
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 92.5(c)(1) |
SAE Paper 770141 |
1977 |
Optimization of a Flame Ionization Detector for Determination of Hydrocarbon in Diluted Automotive Exhausts
|
Society of Automotive Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(27) |
NFPA 251 |
1969 |
Standard Methods of Fire Tests of Building Construction and Materials
|
National Fire Protection Association |
Coast Guard |
|
46 CFR 160.005-4(f) |
Drawing No. 160.005-1 (Sheet 1) |
2012 |
Cutting Pattern and General Arrangement (Adult)
|
U.S. Coast Guard |
National Highway Traffic Safety Administration |
|
49 CFR 572.170(b)(2)(vii) |
Drawing No. 420-5000-2 |
2011 |
Complete Leg Assembly—right
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
Occupational Safety and Health Administration |
|
29 CFR 1926.951(a)(1)(i) |
ANSI J6.2 |
1971 |
Rubber Insulating Hoods
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 63.99(a)(5)(ii)(E) |
CA State Regulations |
2010 |
California Regulatory Requirements Applicable to the Air Toxics Program
|
State of California |
Environmental Protection Agency |
|
40 CFR 63.7824(d)(1) |
EPA Method 9071B |
1998 |
n-Hexane Extractable Material (HEW) for Sludge, Sediment, and Solid Samples
|
U.S. Environmental Protection Agency |
Energy Department |
|
10 CFR 434.701.1 RS-2 |
ASHRAE 55 |
1992 |
Thermal Environmental Conditions for Human Occupancy including addenda 55a-95 (RS-2)
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
Coast Guard |
|
46 CFR 161.006-1(a)(1) |
NSSC 43B11 |
2012 |
Bolts, nuts, studs, and tap-rivets
|
Navy Supply Systems Command |
Federal Railroad Administration |
|
49 CFR 238 Appendix B Note 13 |
ASTM E648 |
2000 |
Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (32) |
ASTM D3086 |
1990 |
Test Method for Organochlorine Pesticides in Water
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.261(c)(8)(iv) |
ANSI B30.2 |
1968 |
Safety Code for Cranes, Derricks, and Hoists
|
American National Standards Institute |
Environmental Protection Agency |
|
40 CFR 143.4(b) Table (Maganese) |
APHA Method 3113 B |
1999 |
APHA Standards On-line, Metals by Graphite Furnace Atomic Absorption
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 60.107a(d)(6)(iii) |
ASME MFC-9M |
2006 |
Measurement of Liquid Flow in Closed Conduits by Weighing Method
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (31) |
EPA Method 625 |
1982 |
Base/Neutrals and Acids by GC/MS
|
U.S. Environmental Protection Agency |
Housing and Urban Development Department |
|
24 CFR 200.935(d)(4)(ii)(A)(5) |
ASQ Q9004-1 |
1994 |
Quality Management and Quality Systems Elements-Guidelines
|
American Society for Quality Control |
Environmental Protection Agency |
|
40 CFR 141.24(e)(1) Table (Picloram) |
ASTM D5317 |
1993 |
Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 147.2650(a)(1) |
PRUIC regulations |
1988 |
Underground Injection Control Regulations of the Commonwealth of Puerto Rico, Parts I through V and appendices A and B, adopted September 14, 1983 (Amended July 20, 1988)
|
Commonwealth of Puerto Rico |
Research and Special Programs Administration |
|
49 CFR 172.401(c)(1) |
UN Publication |
2005 |
UN Recommendations on the Transport of Dangerous Goods
|
United Nations |
Coast Guard |
|
46 CFR 56.60-1(b) Table 56.60-1(b) |
ASME B1.20.1 |
1983 |
Pipe Threads, General Purpose (Inch)
|
American Society of Mechanical Engineers |
Housing and Urban Development Department |
|
24 CFR 3280.304(b)(1) |
ASTM D781 |
1973 |
Standard Test Methods for Puncture and Stiffness of Paperboard and Corrugated and Solid Fiberboard
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 52.741(u)(3)(ii) |
35 I.A.C. 215 |
1989 |
Illinois Administrative Code
|
State of Illinois |
Rural Utilities Service |
|
7 CFR 1755.890(i)(5)(v) |
ASTM B694 |
1986 |
Standard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60.334(h)(1) |
ASTM D5504 |
2001 |
Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
|
ASTM International |
Federal Motor Carrier Safety Administration |
|
49 CFR 393.75(g)(2) |
FMVSS 119 |
1998 |
New Pneumatic Tires for Vehicles Other Than Passenger Cars
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
Housing and Urban Development Department |
|
24 CFR 200.954(a)(2) |
ASTM D3498 |
1993 |
Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Surfaces
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 52.742(d) |
35 I.A.C. 215, Subpart Q |
1989 |
Administrative Code, Excluding sections 215.432 and 215.436
|
State of Illinois |
Food and Drug Administration |
|
21 CFR 165.110(b)(4)(iii)(F)(11) |
EPA Method 508a |
1989 |
Screening for Polychlorinated Bipheyles by Perchlorination and Gas Chromatography
|
U.S. Environmental Protection Agency |
Energy Department |
|
10 CFR 431.102, R-value |
ASTM C518 |
1991 |
Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
|
ASTM International |
Coast Guard |
|
46 CFR 164.120-7, Table 164.120-7(c)(1)(i) |
ASTM D1045 |
2008 |
Standard Test Methods of Sampling and Testing Plasticizers used in Plastics
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (34) |
EPA Method 200.8 |
1994 |
Metals by ICP-MS, Revision 5.4
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (8) Calcium |
ASTM D511B |
2003 |
Standard Test Methods for Calcium and Magnesium In Water, Atomic Absorption Spectrophotometric
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 58 Appendix E, 12.0(12) |
EPA-450-3-75-077 |
1975 |
Selecting Sites for Carbon Monoxide Monitoring. Ludwig, F.L. and J.H.S. Kealoha.
|
U.S. Environmental Protection Agency |