Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
Accessing Standards Incorporated by Reference
This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
| Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Environmental Protection Agency | 86 FR 34308 | ASTM D5769 | 2020 | Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry | ASTM International | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 2 | EPA Method 515.2 | 1995 | Chlorinated acids Liquid/Solid and GC/ECD | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 444.12(b) Appendix (4) | EPA-600-R-94-111 | 1994 | Methods for Determination of Metals in Environmental Samples—Supplement I | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 98.124(e)(1)(ii) | EPA ALT-012 | 1994 | Approved Alternative Method 012: An Alternate Procedure for Stack Gas Volumetric Flow Rate Determination (Tracer Gas) (ALT-012), U.S. Environmental Protection Agency Emission Measurement Center | U.S. Environmental Protection Agency | |
| Coast Guard | 40 CFR 1065.705 Table 1 | ISO 14596 | 2007 | Petroleum products--Determination of sulfur content--Wavelength-dispersive X-ray fluorescence spectrometry | International Organization for Standardization | |
| Food and Drug Administration | 21 CFR 173.25(b)(2)(ii)(B) | FDA Publication | 1998 | Determination of 3-Dimethylaminopropylamine in Food Simulating Extracts of Ion Exchange Resins | Food and Drug Administration, U.S. Department of Health and Human Services | |
| Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.164 | ANSI/NFPA 72D | 2014 | Proprietary Protective Signaling Systems | National Fire Protection Association | |
| Research and Special Programs Administration | 49 CFR 180.209(d) | CGA C-6 | 1993 | Standard for Visual Inspection of Compressed Gas Cylinders | Compressed Gas Association | |
| Environmental Protection Agency | 40 CFR 63.772(h)(6)(iv) | EPA-600-R-97-121 | 1997 | EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards, as amended August 25, 1999 | U.S. Environmental Protection Agency | |
| Housing and Urban Development Department | 24 CFR 200.925b(c)(5) | ANSI A58.1 | 1982 | Building Code Requirements for Minimum Design Loads in Buildings and Other Structures | American National Standards Institute | |
| Rural Utilities Service | 7 CFR 1755.97(b)(1) | RUS Bulletin 345-39 | 1985 | Specification for Telephone Station Protectors | Rural Utilities Service, U.S. Department of Agriculture | |
| Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.931(d) | NACE RP-0502 | 2002 | NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology | National Association of Corrosion Engineers | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(14) | API MPMS | 2003 | Chapter 4, Section 6 | American Petroleum Institute | |
| Energy Department | 10 CFR 434.404.1 | ANSI Z21.66 | 1996 | Automatic Vent Damper Devices for Use with Gas-Fired Appliances (RS-42) | American National Standards Institute | |
| Environmental Protection Agency | 40 CFR 72.2 Diesel fuel | ASTM D975 | 1991 | Standard Specification for Diesel Fuel Oils | ASTM International | |
| Environmental Protection Agency | 40 CFR 282.74(d)(1)(i)(A) | MSUSTP | 1996 | Mississippi Statutory Requirements Applicable to the Underground Storage Tank Program | State of Mississippi | |
| Rural Utilities Service | 7 CFR 1755.390(n)(1) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
| Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.346-1(d)(1) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
| Food and Drug Administration | 21 CFR 184.1408(b)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
| Coast Guard | 46 CFR 114.600(b) | Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
| National Highway Traffic Safety Administration | 49 CFR 572.111(a) | Drawing No. 96-SIDH3-001 | 1996 | Head-Neck Bracket | Reprographic Technologies | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IF (2-propanone (acetone)) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 147.2550(a)(2) | WYUIC regulations | 1983 | Water Quality Rules and Regulations, Wyoming Department of Environmental Quality, Chapter III: Regulations for Permit to Construct, Install or Modify Public Facilities Capable or, (sic) Causing or Contributing to Pollution. | State of Wyoming | |
| Housing and Urban Development Department | 24 CFR 200.946(a)(1)(vi) | ASTM D3273 | 1991 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber | ASTM International | |
| Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 9809-1 | 1999 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 1: Quenched and Tempered Steel Cylinders with Tensile Strength less than 1 100 MPa | International Organization for Standardization | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(88) | API RP 86 | 2005 | Recommended Practice for Measurement of Multiphase Flow; First Edition | American Petroleum Institute | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IC (101) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 141.131(b)(1) Table Note 9 | APHA Standard Methods On-Line | 2014 | On-line editions of Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 63.14(g)(70) | ASTM D6093 | 2003 | Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(B)(3) | CGA C-2 | 2014 | Recommendations for the Disposition of Unserviceable Compressed Gas Cylinders | Compressed Gas Association | |
| National Highway Traffic Safety Administration | 49 CFR 572.101(a) | Drawing No. 92041-002 | 1992 | Skull Assembly | Reprographic Technologies | |
| Environmental Protection Agency | 40 CFR 60.41b Pulverized coal-fired steam generating unit (Residual oil) | ASTM D396 | 1992 | Standard Specification for Fuel Oils | ASTM International | |
| Coast Guard | 46 CFR 139.120(d) | ANSI/ISO/ASQ Q9001-2000 | 2000 | Quality management systems—Requirements | American Society for Quality Control | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (61) | APHA Method 4500-SiO2 C | 1997 | Silica, Dissolved, Molybdosilicate Method | American Public Health Association | |
| Coast Guard | 40 CFR 60.335(b)(4) | EPA Method 20 | 1986 | Source Assessment Sampling System (SASS) | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 266.106(g)(2) | EPA Method 0061 | 1996 | Determination of Hexavalent Chromium Emissions from Stationary Sources | U.S. Environmental Protection Agency | |
| Coast Guard | 46 CFR 114.540(c)(1) | IMO Resolution A.520(13) | 1983 | Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-Saving Appliances and Arrangements | International Maritime Organization | |
| Research and Special Programs Administration | 49 CFR 192.7(c)(2) B1 | API 5L | 2004 | Specification for Line Pipe | American Petroleum Institute | |
| Environmental Protection Agency | 40 CFR 75, Appendix A, Section 2.1.1.1(c) | ASTM D240 | 2000 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
| Energy Department | 10 CFR 430 Subpart B, App. M, 2.10.2 | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
| Mine Safety and Health Administration | 30 CFR 77.403-1(e)(3) | DOI/BOR Publication | 1971 | Safety and Health Regulations for Construction, Part II | Bureau of Reclamation, U.S. Department of Interior | |
| Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.9 | 2003 | Factory-Made Wrought Steel Buttwelding Fittings | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (65) | APHA Method 4500-SO4(2-) D | 1997 | Sulfate, Gravimetric Method with Drying of Residue | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 20 | OIA Method OIA-1677 DW | 2004 | Available Cyanide by Flow Injection, Ligand Exchange, and Amperometry, EPA-821-R-04-001 | OI Analytical | |
| Coast Guard | 33 CFR 157.23(b) | ICS Publication | 1973 | Clean Seas Guide for Oil Tankers | International Chamber of Shipping | |
| Coast Guard | 46 CFR 160.151-57(b)(1) | IMO Resolution MSC.295(87) | 2010 | Annex 9 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.295(87), Adoption of Amendments to the Revised Recommendation on Testing of Life-Saving Appliances | International Maritime Organization | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (6) | ASTM D5673 | 2005 | Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
| Environmental Protection Agency | 40 CFR 136.3(b)(13)(i)(V) | AOAC Method 993.14 | 1998 | Iron-Total, mg/L | AOAC International | |
| Environmental Protection Agency | 40 CFR 799.5087(h)(2) | ISO 14593:1999(E) | 1999 | Water Quality—Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium—Method by Analysis of Inorganic Carbon in Sealed Vessels (CO2 Headspace Test). First Edition | International Organization for Standardization | |
| Occupational Safety and Health Administration | 29 CFR 1910.110(e)(3)(i), Table H-32 | ASME B&PV Code | 1956 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers |