This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 141.25(a) Table | EPA Method 200.8 | 1994 | Metals by ICP-MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.4360 | ASTM D 4084 | 1994 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) | ASTM International | |
Energy Department | 10 CFR 431.66(d)(2)(i) | ARI 1200 | 2006 | Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets | Air Conditioning and Refrigeration Institute | |
Food and Drug Administration | 21 CFR 184.1311(b) | Food Chemicals Codex | 1996 | Ferrous Lactate | National Academy Press | |
Environmental Protection Agency | 40 CFR 94.108(a)(1) Table B-5 | ASTM D 129 | 2000 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Federal Aviation Administration | 14 CFR 27.613(d)(4) | MIL-HDBK-23 | 1973 | Structural Sandwich Composites | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 59.508(b) | ASTM D 523 | 1989 | Standard Test Method for Specular Gloss | ASTM International | |
Coast Guard | 46 CFR 25.45-2(b)(3)(ii) | ABYC A-1 | 1978 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 12.15-3(b)(1) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.85(b)(1) | Drawing No. LP 1049-1 through LP1049-13 | 1979 | 9-month old Dummy Components and Parts for Head-Neck | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(1)(iii) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Federal Railroad Administration | 49 CFR 214.115(b) | ANSI Z41 | 1991 | Protective Footwear | American National Standards Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(j)(1) | AWS B3.0 | 1972 | Standard Qualification Procedure | American Welding Society | |
Energy Department | 10 CFR 440 Appendix A | ASME B&PV Code | 1988 | Boiler and Pressure Vessel Code, Section V | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 36 Appendix G G36.105(b) | IEC 561 | 1976 | Electro-acoustical Measuring Equipment for Aircraft Noise Certification | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (99) | EPA Method 610 (HPLC) | 1982 | Polynuclear Hydrocarbons by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 179/A 179M | 1990 | Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (12) Cyanide | APHA Method 4500-CN F | 1995 | Cyanide by Ion Selective Electrode | American Public Health Association | |
Coast Guard | 46 CFR 160.151-15(a) | MIL-C-17415F | 1989 | Cloth, Coated, and Webbing, Inflatable Boat and Miscellaneous Use | U.S. Department of Defense | |
Research and Special Programs Administration | 49 CFR 178.337-2(b)(1)(i) | ASTM A 300 | 1958 | Standard Specification for Steel Plates for Pressure Vessels for Service at Low-Temperature | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(4) | ASTM A 391 | 1965 | Alloy Steel Chain | ASTM International | |
Food and Drug Administration | 21 CFR 176.170(a)(5) | ASTM E 28 | 1982 | Standard Test Method for Softening Point by Ring and Ball Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (63) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 8 | APHA Standard Methods, 18th Edition | 1992 | Standard Methods for the Examination of Water and Wastewater, 18th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 436.21(c) | NWS Technical Paper No. 40 | 1961 | Rainfall Frequency Altas of the U.S. | U.S. Department of Commerce, National Oceanic and Atmospheric Administration | |
Environmental Protection Agency | 40 CFR 86.1(b)(15) | ASTM D 3237 | 2012 | Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy | ASTM International | |
National Highway Traffic Safety Administration | 9 CFR 317.309(c)(6) | USDA Handbook 74 | 1973 | Energy Values of Foods: Basis and Derivation | U.S. Department of Agriculture | |
Rural Utilities Service | 7 CFR 1755.901(d)(4) | ASTM D 4566 | 1998 | Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(42) | ASTM D 3792 | 1991 | Standard Method for Water Content of Water-Reducible Paints by Direct Injection into a Gas Chromatograph | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | CISPI 301 | 1990 | Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications | Cast-Iron Soil Pipe Institute | |
Environmental Protection Agency | 40 CFR 86.1(g)(8) | SAE J-1939 | 2007 | Recommended Practice for a Serial Control and Communications Vehicle Network | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.17(g)(97) | ASTM D 2504 | 1967 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 147.2350 | VAUIC regulatons | 2014 | Commonwealth of Virginia-administered program (Reserved) | Commonwealth of Virginia | |
Environmental Protection Agency | 40 CFR 63.10005(i)(5)(ii) | ASTM D 4057 | 2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Coast Guard | 46 CFR 161.002-1(b) | IMO SOLAS | 1992 | International Convention for the Safety of Life at Sea with 1992 and 1994 amendments | International Maritime Organization | |
Rural Utilities Service | 7 CFR 1728.202(f)(1)(v)(A) | AWPA A6 | 2001 | Method for the Determination of Oil-Type Preservatives and Water in Wood | American Wood Protection Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 13.2.1 | EPA Method 6010 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 3280.305(g)(6) | ASTM D 781 | 1973 | Standard Test Methods for Puncture and Stiffness of Paperboard and Corrugated and Solid Fiberboard | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.158 | NFPA 197 | 1966 | Training for Initial Fire Attack | National Fire Protection Association | |
Coast Guard | 46 CFR 56.95-10(c)(4) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.555(a)(8) | ANSI B20.1 | 1957 | Safety Code for Conveyors, Cableways, and Related Equipment | American National Standards Institute | |
Coast Guard | 46 CFR 160.156-7(b)(26) | Federal Standard 595C | 2008 | Colors Used in Government Procurement | General Services Administration | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (5) | ASTM D 1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | UL 17 | 1988 | Stack and Damper, Oil-fueled | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.133(c)(2) | Drawing No. 9000018 | 1987 | Jam Nut | Reprographic Technologies | |
Federal Highway Administration | 23 CFR 655.601(c) | AASHTO Publication | 1993 | Traffic Engineering Metric Conversions Factors, Addendum to the Guide to Metric Conversion | American Association of State Highway and Transportation Officials | |
Environmental Protection Agency | 40 CFR 141.74(a)(1) Table (Total Coliform) | APHA Method 9222 C | 1997 | Delayed-Incubation Total Coliform Procedure | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.1.2 | DOE IDO-12096 | 1982 | RESL Analytical Chemistry Branch Procedures Manual | U.S. Department of Energy | |
Energy Department | 10 CFR 434.403.1 Table 403.1d | ARI 310/380 | 1993 | Packaged Terminal Air-Conditioners and Heat Pumps (RS-17) | Air Conditioning and Refrigeration Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(v)(1) | TFI M-1 | 1963 | Standards for the Storage and Handling of Agricultural Anhydrous Ammonia | Fertilizer Institute |