This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 63.1625(b)(10) | CAARB Method 429 | 1989 | Determination of Polycyclic Aromatic Hydrocarbon (PAH) Emissions from Stationary Sources, amended July 28, 1997 | California Air Resources Board | |
Coast Guard | 46 CFR 160.176-13(y)(1) | Federal Standard 191A | 1978 | Method 5100, Strength and Elongation, Breaking of Woven Cloth: Grab Method | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 56.30-25(a) | ASTM F 1387 | 1993 | Standard Specification for Performance of Mechanically Attached Fittings | ASTM International | |
Environmental Protection Agency | 40 CFR 272.751(b)(1) | INHWMP | 1974 | State of Indiana Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of Indiana | |
Coast Guard | 40 CFR 444.12(b)(1) Table (5) | APHA Method 4500-H+B | 2005 | pH Value by Electrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 52.742(a)(1) | ASTM D 1475 | 1985 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.10 | 2000 | Face-to-Face and End-to-End Dimensions of Valves | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.263(k)(2)(i) | NFPA 656 | 1959 | Standard for the Prevention of Dust Ignition in Spice Grinding Plants | National Fire Protection Association | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (13) | ASTM D 511B | 2008 | Calcium by Flame Atomic Absorption | ASTM International | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.6.4(a)(3) | AGA Report No. 3, Part 1 | 1990 | Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids, Part 1: General Equations and Uncertainty Guidelines | American Gas Association | |
Environmental Protection Agency | 40 CFR 763 Appendix A (II)(J)(1) | EPA-560-5-85-024 | 1985 | Guidance for Controlling Asbestos-Containing Materials in Buildings | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(4)(ii) | NFPA 1971 | 2000 | Standard on Protective Ensemble for Structural Fire Fighting | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-124 | 1978 | Arm Assembly (RH), Complete, Revision D | General Motors Corporation | |
Coast Guard | 46 CFR 160.151-57(b)(11) | IMO Resolution MSC.295(87) | 2010 | Annex 9 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.295(87), Adoption of Amendments to the Revised Recommendation on Testing of Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 54.25-10(b)(1)(i) | ASTM A 20/A 20M | 1997 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1796 | 2009 | Standard Specification for High Voltage Detectors—Part 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (11) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.852(a)(5) Table | APHA Method 9222 C | 1997 | Delayed-Incubation Total Coliform Procedure | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(c) | EPA SW-846-3050B | 1996 | Acid Digestion of Sediments, Sludges, and Soils, Revision 2 | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 184.1025(b) | Food Chemicals Codex | 1981 | Caprylic Acid | National Academy Press | |
Occupational Safety and Health Administration | 29 CFR 1917.3(b)(4) | ANSI/NSC Z41 | 1999 | Protective Footwear | National Safety Council | |
Occupational Safety and Health Administration | 29 CFR 1926.302(e)(12) | ANSI A10.3 | 1970 | Safety Requirements for Explosive-Actuated Fastening Tools | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC Footnote 3 | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (2,4,5-TP (Silvex)) | EPA Method 515.3 | 1996 | Determination of Chlorinated Acids in Drinking Water by Liquid-Liquid Extraction, Derivitization, and Gas Chromatography with Electron Capture Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.593a(d) | ASTM D 86 | 1993 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1211.8 (f) | UL 1998 | 2013 | Standard for Safety: Software in Programmable Components | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | MSS SP-73 | 1991 | Brazing Joints for Wrought and Cast Copper Alloy Solder Joint Pressure Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Federal Railroad Administration | 49 CFR 229.51(a)(2) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.890(l)(5) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.45(f)(4)(vi) | ASTM D 388 | 1977 | Standard Classification of Coals by Rank | ASTM International | |
Coast Guard | 46 CFR 147.7(d)(1) | NFPA 2001 | 2008 | Standard on Clean Agent Fire Extinguishing Systems | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.125(a) | Drawing No. 127-2000 | 1994 | Upper Torso Assembly | Reprographic Technologies | |
Food and Drug Administration | 21 CFR 73.160(a) | Food Chemicals Codex | 1981 | Ferrous Gluconate | National Academy Press | |
Public Health Service | 46 CFR 160.062-1(a)(1) | MIL-STD-105D | 1993 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
Research and Special Programs Administration | 49 CFR 178.337-8(b)(1) | CI Drawing No. 101-7 | 1993 | Excess Flow Valve with Removable Seat | Chlorine Institute, Inc. | |
Rural Utilities Service | 7 CFR 1728.97(e)(2) | AWPA A2 | 2008 | Standard Methods for Analysis of Waterborne Preservatives and Fire-Retardant Formulations | American Wood Protection Association | |
Energy Department | 10 CFR 431.19(c)(3) | ISO/IEC Guide 25 | 1990 | General requirements for the competence of calibration and testing laboratories | International Organization for Standardization / International Electrotechnical Commission | |
Animal and Plant Health Inspection Service | 7 CFR 300.3(a) | USDA Reference Manual A | 2000 | Reference Manual for Administration, Procedures, and Policies of the National Seed Health System | U.S. Department of Agriculture | |
Food and Drug Administration | 21 CFR 184.1330(b) | Food Chemicals Codex | 1981 | Acacia (Gum Arabic) | National Academy Press | |
Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(7) | SAE J-588 | 2000 | Turn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width | Society of Automotive Engineers | |
Federal Trade Commission | 16 CFR 460.5(a) | ASTM C 1114 | 2000 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | EPA Method 200.5 | 2003 | Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) Note | APHA Method 9221 B | 1999 | Multiple Tube Fermentation Qualitative (LTB): Total Coliform | American Public Health Association | |
Environmental Protection Agency | 40 CFR 799.5089(j) Table 3, C2 | ASTM E 1193 | 1997 | Standard Guide for Conducting Daphnia Magna Life-Cycle Toxicity Tests | ASTM International | |
Environmental Protection Agency | 40 CFR 92.5(b)(8) | ASTM D 1945 | 1991 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
National Highway Traffic Safety Administration | 49 CFr 572.173(b) | Drawing No. 420-2000 | 2011 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Terbutryn) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 300.915(a)(9) Footnote 1 | ASTM Annual Book of Standards | 1992 | ASTM Annual Book of Standards | ASTM International | |
Environmental Protection Agency | 40 CFR 75, Appendix G, Section 2.1.2 | ASTM D 2502 | 1996 | Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils from Viscosity Measurements | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 12, 14(c) | ASTM D 6784 | 2008 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International |