This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 147.2400(a)(4) | WAUIC regulations | 1988 | Washington Administrative Code Chapter 173-160 (reprinted May 1988) | State of Washington | |
Research and Special Programs Administration | 49 CFR 179.100-7(b) | ASTM B 209 | 1993 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate | ASTM International | |
Coast Guard | 46 CFR 121.240(c)(4) | ABYC A-1 | 1993 | Marine Liquified Petroleum Gas (LPG) Systems | American Boat and Yacht Council | |
Food and Drug Administration | 21 CFR 177.1520(b) | ASTM D 3835 | 1983 | Standard Test Method for Rheological Properties of Thermoplastics with a Capillary Rheometer | ASTM International | |
Environmental Protection Agency | 40 CFR 63.4741(b)(1) | ASTM D 6093 | 1997 | Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer | ASTM International | |
Food and Drug Administration | 21 CFR 184.1784(b) | Food Chemicals Codex | 1981 | Sodium Propionate | National Academy Press | |
Coast Guard | 40 CFR 60.564(j)(1) | ASTM D 2908 | 1991 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | CISPI HSN | 1985 | Specifications for Neoprene Rubber Gaskets for Hub and Spigot Cast Iron Soil Pipe Fittings | Cast-Iron Soil Pipe Institute | |
Environmental Protection Agency | 40 CFR 262.82(a) | OECD Publication | 2009 | Annex C (Amber List) of the 2009 Guidance Manual for the Implementation of Council Decision C(2001)107/FINAL, as Amended, on the Control of Transboundary Movements of Wastes Destined for Recovery Operations | Organization for Economic Cooperation and Development | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(1) | ASME B&PV Code | 1963 | Boiler and Pressure Vessel Code, Section III, and include the 1963 Edition through 1973 Winter Addenda, and the 1974 Edition (Division 1) through the 2004 Edition (Division 1) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.224(b)(3)(ii) | AOAC Method 9 | 1970 | Official Methods of Analysis, 11th Edition | AOAC International | |
National Highway Traffic Safety Administration | 49 CFR 572.111(a) | Drawing No. 96-SIDH3-001 | 1996 | Head-Neck Bracket | Reprographic Technologies | |
Occupational Safety and Health Administration | 29 CFR 1910.104(b)(5)(ii) | ANSI Addenda B31.10a | 1969 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 52.741(u)(1)(i) | 35 I.A.C. 215, Subpart Y | 1989 | Administrative Code | State of Illinois | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix E (1)(C) | MIL-B-2885D | 1975 | Military Specification For Fireman's Boots amendment | U.S. Department of Defense | |
Federal Aviation Administration | 14 CFR 36 Appendix J J36.109(d)(1)(iii) | IEC 651 | 1979 | Sound Level Meters | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (100) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(b)(1) Table | EPA Method 502.2 | 1995 | Volatile Organic Compounds (Drinking Water) by GC/PID/ELCD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(a) | ASTM D 2234/D 2234M | 2010 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D 2247 | 1992 | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0020 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Minerals Management Service | 30 CFR 250.1002(b)(2) | ASME B16.5 | 2003 | Steel Pipe Flanges and Pipe Fittings | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 434.701.1 RS-23 | ANSI Z83.9 | 1990 | Gas-Fired Duct Furnaces (RS-23) | American National Standards Institute | |
Coast Guard | 46 CFR 114.600(b) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (63) | APHA Method 3500-Na B | 1997 | Sodium, Flame-Emission Photometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 8 | WC Method B-1011 | 1987 | Waters Test Method for Determination of Nitrite/Nitrate in Water Using Single Column Ion Chromatography | Waters Corp. | |
Environmental Protection Agency | 40 CFR 60.41c Distillate oil | ASTM D 6751 | 2012 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Rural Utilities Service | 7 CFR 1755.390(i)(10) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
National Highway Traffic Safety Administration | 49 CFR 572.5(a) | Drawing No. SA 150 M010 | 1987 | Head assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 56.70-15(c) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.6.4(b)(3) | AGA Report No. 3, Part 1 | 1990 | Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 1: General Equations and Uncertainty Guidelines | American Gas Association | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, SAE J-1990, Section 2.1.1 | SAE J-2196 | 2008 | Service Hose for Automotive Air-Conditioning | Society of Automotive Engineers | |
Federal Communications Commission | 47 CFR 17.23 | FAA AC 70/7460-1J | 1996 | Obstruction Marking and Lighting | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.156-7(b)(3)(iv)(C) | MIL-P-17549D(SH) | 1981 | Military Specification, Plastic Laminates, Fibrous Glass Reinforced, Marine Structural | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 60.17(g)(170) | ASTM D 5453 | 2000 | Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.125(e)(3)(i) | NFPA 86A | 1969 | Standard for Oven and Furnaces Design, Location and Equipment | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 63, Subpart SSSSS, Table 4, (1)(d)(ii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 101.81(c)(2)(ii)(A) | AOAC Official Methods | 1995 | Official Methods of Analysis | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM D 1051 | 2008 | Standard Specification for Rubber Insulating Sleeves | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (6) | APHA Method 3114 C | 2009 | Arsenic and Selenium Digestion | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(13)(i)(I) | AOAC Method 973.47 | 1998 | Organic carbon in water. Infrared analyzer method | AOAC International | |
Environmental Protection Agency | 40 CFR 799.5085(j) Table 3, C4 | ASTM E 729 | 1996 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians | ASTM International | |
Environmental Protection Agency | 40 CFR 52, Subpart MM | ORSIP | 1979 | State of Oregon Implementation Plan with Regulatory and Nonregulatory Revisions | State of Oregon | |
Labor Department | 41 CFR 50-204.2(a)(3) | 49 CFR 175 | 2014 | Carriage by Aircraft | U.S. Department of Transportation | |
Coast Guard | 33 CFR 157.23(b) | ICS Publication | 1973 | Clean Seas Guide for Oil Tankers | International Chamber of Shipping | |
Environmental Protection Agency | 40 CFR 60.251(c) Bituminous coal | ASTM D 388 | 1977 | Standard Classification of Coals by Rank | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.136(b)(1) | Drawing No. 880105-528R | 1987 | Sliding knee assembly, right | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Diuron) | EPA Method 553 | 1992 | Determination of Benzidines and Nitrogen-Containing Pesticides in Water by Liquid-Liquid Extraction or Liquid-Solid Extraction and Reverse Phase High Performance Liquid Chromatography/Particle Beam/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 266, Appendix IX, 5.0 | EPA-450-2-78-027R | 1986 | Guidance on Air Quality Models (Revised) | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 192, Appendix B, II | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers |