This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (9) | EPA Method 200.7 | 1994 | Inductively Coupled Plasma Atomic Emission Spectrometric Method for Trace Element Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.84(a) | ASTM C 114 | 2009 | Standard Test Methods for Chemical Analysis of Hydraulic Cement | ASTM International | |
Environmental Protection Agency | 40 CFR 60.593a(b)(2) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Subpart S | ASTM C 332 | 1977 | Lightweight Aggregates for Insulating Concrete | ASTM International | |
Justice Department | 28 CFR 42.522(b)(1) | UFAS | 1991 | Uniform Federal Accessibility Standards | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Isopropyl ether) | ASTM D 3695 | 1995 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 147.1050(a)(7) | MDUIC regulations | 1989 | Code of Maryland Regulations, Title 26, Subtitle 01, Chapter 02, promulgated and effective as of March 1, 1989 | State of Maryland | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(e) | ASTM D 3173 | 2008 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke | ASTM International | |
Coast Guard | 46 CFR 63.15-1(b) | ASME CSD-1 | 2004 | Controls and Safety Devices for Automatically Fired Boilers | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b) | ANSI B30.5 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63.1251, Maximum true vapor pressure (1) | API MPMS | 1997 | Evaporative Loss from Floating Roof Tanks, Chapter 19.2 | American Petroleum Institute | |
Federal Motor Carrier Safety Administration | 49 CFR 393.104(e)(5)(iv) | CIA NRS-1 | 1979 | Nylon Rope Specification, Three- and Eight-Strand Standard Construction | Cordage Institute | |
Rural Utilities Service | 7 CFR 1755.522(v)(1) | ASTM B 33 | 1991 | Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S14.6.2.1.1(a) | ASTM D 362 | 1984 | Standard Specification for Industrial Grade Toluene | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(4)(xii) | NFPA 15 | 2001 | Standard for Water Spray Fixed Systems for Fire Protection | National Fire Protection Association | |
Coast Guard | 46 CFR 12.15-3(b)(1) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.85(b)(1) | Drawing No. LP 1049-1 through LP1049-13 | 1979 | 9-month old Dummy Components and Parts for Head-Neck | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63.99(a)(48)(ii) | WA State Regulations | 2015 | Puget Sound Clean Air's Regulation III, sections 3.03, Perchloroethylene Dry Cleaners | State of Washington | |
Research and Special Programs Administration | 10 CFR 440 Appendix A | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (20) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 184.1141b(b) | Food Chemicals Codex | 1981 | Ammonium Phosphate, Dibasic | National Academy Press | |
Energy Department | 10 CFR 440 Appendix A | ASME B&PV Code | 1988 | Boiler and Pressure Vessel Code, Section V | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 36 Appendix G G36.105(b) | IEC 561 | 1976 | Electro-acoustical Measuring Equipment for Aircraft Noise Certification | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (99) | EPA Method 610 (HPLC) | 1982 | Polynuclear Hydrocarbons by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | ASTM Annual Book of Standards | 1996 | Water and Environmental Technology--Section 11.01 | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(12) | ASTM D 1475 | 2012 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Coast Guard | 29 CFR 1926.6(h)(2) | ANSI A10.4 | 1963 | Safety Requirements for Workmen's Hoists | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (63) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 2 | EPA-600-R-94-111 | 1994 | Methods for the Determination of Metals in Environmental Samples—Supplement I | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41c Distillate oil | ASTM D 975 | 2008 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 33 CFR 149.408(a) | NFPA 10 | 2010 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Drug Enforcement Administration | 21 CFR 1311.08(b)(3) | FIPS Publication 180-3 | 2008 | Secure Hash Standard (SHS) | National Institute of Standards and Technology, U.S. Department of Commerce | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(G)(2)(i) | EPA-600-4-79-020 | 1983 | Method 272.1--Atomic Absorption: direct aspiration | U.S. Environmental Protection Agency | |
Interior Department | 43 CFR 11.36(b)(8) | DOI NRDAM/CME | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Coastal and Marine Environments, Technical Documentation | U.S. Department of the Interior | |
Coast Guard | 46 CFR 160.047-1(a)(2) | MIL-W-530 | 1988 | Webbing, Textile, Cotton, General Purpose, Natural and In Colors | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 65.13(b)(2) | ASTM D 2382 | 1976 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Rural Utilities Service | 7 CFR 1728.97(a)(13) | RUS Bulletin 50–41 (D–15) | 1951 | RUS Specification for Service Wireholders | Rural Utilities Service, U.S. Department of Agriculture | |
National Highway Traffic Safety Administration | 49 CFR 571.135 S6.2.1 | ASTM E 1337 | 2008 | Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire | ASTM International | |
Coast Guard | 46 CFR 56.95-10(c)(4) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 12.01-3(b)(1) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDD, Table 4, (8) | NCASI Method IM/CAN/WP-99.02 | 2004 | Impinger/Canister Source Sampling Method For Selected HAPs and Other Compounds at Wood Products Facilities. | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.44(b)(1) | Drawing No. SA-SID-005 | 1994 | Thorax Accelerometer, Revision F | Reprographic Technologies | |
Coast Guard | 46 CFR 182.130 | ABYC P-1 | 1993 | Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 1065.710 Table 1 | ASTM D 5191 | 2013 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) | ASTM International | |
Rural Utilities Service | 7 CFR 1755.508(l) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 160.156-7(b)(26) | Federal Standard 595C | 2008 | Colors Used in Government Procurement | General Services Administration | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (5) | ASTM D 1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(13)(i)(C) | AOAC Method 973.40 | 1998 | Specific conductance of water | AOAC International | |
Environmental Protection Agency | 40 CFR 799.5085(j) Table 3, C2 | ASTM E 1218 | 2004 | Standard Guide for Conducting Static Toxicity Tests with Microalgae | ASTM International | |
Environmental Protection Agency | 40 CFR 98.244(b)(4)(vii) | ASTM D 5373 | 2002 | Standard Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke | ASTM International |