This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(D)(1) | ANSI/NFPA 13 | 2014 | Standard of the Installation of Sprinkler Systems | National Fire Protection Association | |
Rural Utilities Service | 7 CFR 1755.505(h)(2) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.13.3(b) | SAE J-527a | 1967 | Brazed Double Wall Low Carbon Steel Tubing | Society of Automotive Engineers | |
Minerals Management Service | 30 CFR 250.1202(g) | API MPMS | 1994 | Manual of Petroleum Measurement Standards | American Petroleum Institute | |
Coast Guard | 33 CFR 183.5(b) | SAE J-1128 | 1975 | Low Tension Primary Cable | Society of Automotive Engineers | |
Research and Special Programs Administration | 49 CFR 179.220-7(a) | AAR Specification TC 128 | 2000 | AAR Specifications for Tank Cars, Grade B | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | ASTM D 1253 | 1986 | Standard Test Method for Residual Chlorine in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(72) | ASTM D 6323 | 1998 | Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities | ASTM International | |
Food and Drug Administration | 21 CFR 184.1063(b)(8) | FDA Publication | 1985 | Determination of Lysolecithin Content of Enzyme-Modified Lecithin, Method I | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 160.010-3(a)(9) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Rural Utilities Service | 7 CFR 1755.97(b)(1) | RUS Bulletin 345-39 | 1985 | Specification for Telephone Station Protectors | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 60.17(g)(4) | ASTM A 100 | 1974 | Standard Specification for Ferrosilicon | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | HP-SG-96 | 1996 | Structural Design Guide for Hardwood Plywood Wall Panels--HPVA Design Guide | Hardwood Plywood and Veneer Association | |
Food and Drug Administration | 21 CFR 184.1866(b) | Food Chemicals Codex | 1996 | High Fructose Corn Syrup | National Academy Press | |
Federal Railroad Administration | 49 CFR 232.603(a) | AAR S-4240 | 2007 | ECP Brake Equipment—Approval Procedure | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (18) | EPA Method 608 | 1982 | Organochlorine Pesticides & PCBs by GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.852(c)(1)(iii) | APHA Standard Methods On-Line | 2014 | On-line editions of Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(a) | ASTM D 4057 | 2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1 | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.946(a)(2) | EIMA Test Method 101.02 | 1995 | Standard Test Method for Resistance to Water of Exterior Insulation and Finish Systems (EIFS), Class PB (modified ASTM E331-91) | Exterior Insulation Manufacturers Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (12) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Dalapon) | EPA Method 515.4 | 2000 | Determination of Chlorinated Acids in Drinking Water by Liquid-Liquid Microextraction, Derivitization, and Fast Gas Chromatography with Electron Capture Detection, Revision 1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.593(b)(2) | ASTM E 169 | 1977 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Coast Guard | 46 CFR 108.113 | ABS Publication | 1978 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Environmental Protection Agency | 40 CFR 63.626(c)(3)(ii)(G) | AFPC Book of Methods | 1991 | Section XI, Methods of Analysis for Phosphoric Acid, Superphosphate, Triple Superphosphate, and Ammonium Phosphates, No. 3 Total Phosphorus—P2O5, Method C—Spectrophotometric Method | Association of Florida Phosphate Chemists | |
Federal Communications Commission | 47 CFR 15.118(c)(3) | EIA-IS-132 | 1994 | Cable Television Channel Identification Plan | Electronic Industries Association | |
Energy Department | 10 CFR 431.96 (c) | AHRI 390-2003 | 2003 | 2003 Standard for Performance Rating of Single Package Vertical Air-Conditioners and Heat Pumps | Air Conditioning, Heating, and Refrigeration Institute | |
Food and Drug Administration | 21 CFR 131.206(e)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(10) | ASAE R276 | 1967 | Emblem for Identifying Slow Moving Vehicles | American Society of Agricultural Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.208 S8.3.2 | ASTM E 274 | 1965 | Standard Test Method for Skid Resistance of Pavements Using a Two Wheel Trailer | ASTM International | |
Rural Utilities Service | 7 CFR 1755.397(a)(5)(iii) | Bellcore TR-NWT-000303 | 1992 | Integrated Digital Loop Carrier System Generic Requirements, Objectives, and Interface | Bell Communications Research | |
Environmental Protection Agency | 40 CFR 136.3(b)(33)(xv) | USGS Publication | 1989 | Methods for Determination of Inorganic Substances in Water and Fluvial Sediments, by M.J. Fishman and Linda C. Friedman, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A1 | U.S. Geological Survey | |
Energy Department | 10 CFR 431.20(b)(4) | CSA C390 | 1993 | Energy Efficiency Test Methods for Three-Phase Induction Motors, Test Method (1) | Canadian Standards Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 6892 | 1984 | Metallic Materials Tensile Testing | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 4500-Cl F | 2014 | Chlorine, DPD Ferrous Titrimetric | American Public Health Association | |
Coast Guard | 46 CFR 110.10-1(g)(18) | IEC 92-301 | 1995 | Amendment 2 Electrical Installation in Ships, Part 301: Equipment-Generators and Motors | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 75.6(f)(3) | API MPMS | 1988 | Chapter 4, Section 3 | American Petroleum Institute | |
Coast Guard | 46 CFR 160.151-5(d)(1) | IMO Resolution A.657(16) | 1989 | Instructions for Action in Survival Craft | International Maritime Organization | |
Coast Guard | 46 CFR 164.120-5(e)(3) | MIL-R-24719(SH) | 1989 | Military Specification, Resins, Vinyl Ester, Low Pressure Laminating | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (26) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(a)(4)(i) Table Note 8 | EPA Method 200.8 | 1994 | Metals by ICP-MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 799.9130(g)(5) | OECD No. 403 | 1981 | Guidelines for Testing of Chemicals, Acute Inhalation Toxicity | Organization for Economic Cooperation and Development | |
Coast Guard | 46 CFR 160.077-19(c)(7)(ii) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.176(b) | Drawing No. 420-5500 | 2011 | Foot molded assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (2) | APHA Method 9221 C | 2006 | Estimation of Bacterial Density | American Public Health Association | |
Environmental Protection Agency | 40 CFR 435.11(e) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.47(r)(1)(x) | ASTM D 7039 | 2013 | Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(v)(B) | ANSI B31.1 | 1967 | Code for Pressure Piping | American National Standards Institute | |
National Archives and Records Administration | 36 CFR 1234.10(j) | UL 611 | 1996 | Central-Station Burglar-Alarm Systems | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-90 | 1978 | Neck Assembly | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 63.1208(b)(5)(i)(C)(5) | ASTM D 6735 | 2001 | Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources--Impinger Method | ASTM International |