This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (15) | APHA Method 5220 B | 1997 | Chemical Oxygen Demand by Closed Reflux and Titration | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(18) | ANSI J6.2 | 1971 | Rubber Insulating Hoods | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (28) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Pentachlorophenol) | EPA Method 515.2 | 1995 | Chlorinated acids Liquid/Solid and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.106a(a)(2)(v) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASME B30.5 | 2004 | Mobile And Locomotive Cranes | American Society of Mechanical Engineers | |
Minerals Management Service | 10 CFR 431.294(b)(1) | ASHRAE 32.1 | 2004 | Methods of Testing for Rating Vending Machines for Bottled, Canned, and Other Sealed Beverages | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 2.5 | EPA-454-R-98-004 | 1998 | Quality Assurance Handbook for Air Pollution Measurement Systems, Volume II: Part 1—Ambient Air Quality Monitoring Program Quality System Development | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (5) | APHA Method 9221 F | 2006 | Multiple Tube Fermentation Qualitative (LTB/EC MUG): Total Coliform and E. Coli | American Public Health Association | |
Environmental Protection Agency | 40 CFR 98.74(c)(1) | ASTM D 1945 | 2003 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Health and Human Services Department | 45 CFR 162.1302(b)(1) | NCPDP Publication | 2000 | Batch Standard Batch Implementation Guide, Version 1, Release 1 | National Council for Prescription Drug Programs | |
Coast Guard | 46 CFR 116.300(b)(2) | ABS Publication | 1997 | Guide for Building and Classing High Speed Craft | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 571.5(c)(1) | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(56) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Coast Guard | 46 CFR 34.10-10(m) | UL 19 | 1998 | Woven Jacketed, Rubber Lined Fire Hose | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | MSS SP-83 | 1995 | Steel Pipe Unions, Socket-Welding and Threaded | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Federal Railroad Administration | 49 CFR 238 Appendix B (a)(1)(ix) | ASTM E 1354 | 1999 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter | ASTM International | |
Coast Guard | 46 CFR 170.245(b)(9) | MIL-P-21929B | 1991 | Plastic Material, Cellular Polyurethane, Foam-in-Place, Rigid (2 Pounds per Cubic Foot | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (33) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/mass Spectrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (7) Cadmium | APHA Method 3113 B | 1999 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(2) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section XI | American Society of Mechanical Engineers | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.51(b)(1) 249 | The United States Pharmacopoeia | 1980 | Formula No. 25-A | U.S. Pharmacopeial Convention | |
Research and Special Programs Administration | 49 CFR 178.338-2(a) | ASTM A 441 | 1981 | High-Strength Low-Alloy Structural Manganese Vanadium Steel | ASTM International | |
Coast Guard | 46 CFR 160.133-5(b)(1) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural Steel | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.181 Table A | Drawing No. 175-3500 | 2009 | Arm Assembly, Left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(viii) | EPA-821-R-02-012 | 2002 | Methods for Measuring the Acute Toxicity of Effluents and Receiving Waters to Freshwater and Marine Organisms, Fifth Edition | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(hh) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.1401 Biodiesel | ASTM D 6751 | 2020 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 147.1600(a)(2) | NMUIC regulations | 1978 | State of New Mexico Energy and Mineral Department, Oil Conservation Division—Rules and Regulations (dated 10-1-78), sections B-3, I-701 through I-708, M-1100 through M-1121 | State of New Mexico | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 4184 | 1982 | Specification for Reinforced Thermosetting Resin (RTRP) Sewer Pipe (Withdrawn 1986) | ASTM International | |
Rural Utilities Service | 7 CFR 1755.860(n)(5) | ASTM D 4565 | 1990 | Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.274(f)(1)(v) | ISO 4126-1 | 1991 | Safety Valves | International Organization for Standardization | |
Federal Trade Commission | 16 CFR 460.5(e)(1)(i) | ASTM C 177 | 2004 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded Hot-Plate Apparatus | ASTM International | |
Food and Drug Administration | 21 CFR 177.1970(c)(1)(ii) | ASTM D 1243 | 1979 | Standard Methods of Test for Dilute Solution Viscosity of Vinyl Chloride Polymers | ASTM International | |
Coast Guard | 46 CFR 181.425(a) | UL 710 | 1993 | Exhaust Hoods for Commercial Cooking Equipment | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 60.564(j)(1)(i) | ASTM D 3370 | 1996 | Standard Practices for Sampling Water | ASTM International | |
Environmental Protection Agency | 40 CFR 260.11(c)(3)(vi) | EPA Method 1330A | 1992 | Extraction Procedure for Oily Wastes (and in Basic Manual I) | U.S. Environmental Protection Agency | |
Federal Aviation Administration | 14 CFR 25 Appendix N N25.3(a) | DOT/FAA/AR-05/8 | 2008 | Fuel Tank Flammability Assessment Method User's Manual | Federal Aviation Administration, U.S. Department of Transportation | |
Federal Motor Carrier Safety Administration | 49 CFR 393.11(b) | FMVSS 108 | 1998 | Lamps, Reflective Devices, and Associated Equipment | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 52.01-140(a) | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 45 CFR 162.920(c)(1)(vi) | CAQH Publication | 2011 | Phase I CORE 157: Eligibility and Benefits System Availability Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
National Highway Traffic Safety Administration | 49 CFR 572.15(b) | Drawing No. SA 103C 020 | 1976 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (51) | EPA Method 632 | 1993 | Carbamate and Urea Pesticides by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 431.102, R-value | ASTM C 177 | 1997 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.106(a)(14)(ii) | ASTM D 93 | 1971 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
National Archives and Records Administration | 36 CFR 1235.46(d)(1) | NISO 9660 | 1990 | Volume and File Structure of CD-ROM for Informational Exchange | National Information Standards Organization | |
Environmental Protection Agency | 40 CFR 60.17(g)(120) | ASTM D 3176 | 1989 | Standard Method for Ultimate Analysis of Coal and Coke | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.71(b) Table A | Drawing No. SA 106C 041 | 1997 | Arm Assembly, Right, Revision A | Reprographic Technologies | |
Occupational Safety and Health Administration | 29 CFR 1926 Subpart L Appendix B | USDOC PS 20 | 1970 | American Softwood Lumber Standard | U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (55) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency |