| Minerals Management Service |
|
30 CFR 250.1904(b) |
COS Safety Publication COS-2-03 |
2012 |
Requirements for Third-party SEMS Auditing and Certification of Deepwater Operations, First Edition
|
Center for Offshore Safety |
| Coast Guard |
|
21 CFR 145.125(b)(2)(ii) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
| Coast Guard |
|
40 CFR 136.3(a) Table IF (Acetonitrile) |
ASTM D3371 |
1995 |
Standard Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 61.04(c)(1)(i) |
NH State Regulations, Env-Sw 2100 |
2010 |
Management and Control of Asbestos Disposal Sites Not Operated after July 9, 1981, (including a letter from Commissioner, Department of Environmental Services, State of New Hampshire, dated February 12, 2010, Env-Sw 2100)
|
State of New Hampshire |
| Drug Enforcement Administration |
|
21 CFR 1311.08(b)(1) |
FIPS Publication 140-2 |
2001 |
Federal Information Processing Standard Publication (FIPS PUB) 140-2, Change Notices (12-03-2002), Security Requirements for Cryptographic Modules, including Annexes A through D
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Coast Guard |
|
46 CFR 110.10-1(n)(2) |
MIL-HDBK-299(SH) |
1989 |
Military Handbook Cable Comparison Handbook Data Pertaining to Electric Shipboard Cable Notice 1-1991 (Revision of MIL-HDBK-299(SH))
|
Naval Sea Systems Command |
| National Highway Traffic Safety Administration |
|
49 CFR 572.74(a) |
Drawing No. SA-6C-1610-2 |
1996 |
Screw Button Head Socket
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IF (Ethyl acetate) |
EPA Method 1666 |
1998 |
Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 147.1050(a)(7) |
MDUIC regulations |
1989 |
Code of Maryland Regulations, Title 26, Subtitle 01, Chapter 02, promulgated and effective as of March 1, 1989
|
State of Maryland |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
CGA TB-2 |
1980 |
Guidelines for Inspection and Repair of MC-330 and MC-331 Cargo Tanks
|
Compressed Gas Association |
| Labor Department |
|
41 CFR 50-204.75 |
49 CFR 177 |
2012 |
Carriage by Public Highway
|
U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (93) |
EPA Method 625 |
1982 |
Base/Neutrals and Acids by GC/MS
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.131(a)(2) |
EPA Method 327.0 |
2005 |
Determination of Chlorine Dioxide and Chlorite Ion in Drinking Water Using Lissamine Green B and Horseradish Peroxidase with Detection by Visible Spectrophotom, Revision 1.1
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(30) |
ASTM D2908 |
2001 |
Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
|
ASTM International |
| Research and Special Programs Administration |
|
45 CFR 162.1102(b)(2)(v)(A) |
NCPDP Publication |
1999 |
Telecommunication Standard, Implementation Guide Version 5, Release 1
|
National Council for Prescription Drug Programs |
| Environmental Protection Agency |
|
40 CFR 60.41c Residual oil |
ASTM D3980 |
1989 |
Standard Practice for Interlaboratory Testing of Paint and Related Materials
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 62.16050 Table 2 |
ASTM D6784-02 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Federal Highway Administration |
|
23 CFR 650.211(c) |
USEPA 84-B-92-002 |
1993 |
Guidance Specifying Management Measures for Sources of Nonpoint Source Pollution in Coastal Waters
|
U.S. Environmental Protection Agency |
| Food and Drug Administration |
|
21 CFR 801.410(d)(2) |
ASTM D412 |
1968 |
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 147.1900(a)(1) |
ORUIC regulations |
1983 |
Oregon Revised Statutes, Title 16, chapter 164, section 164.785; Title 36, chapter 468, sections 468.005, 468.065 to 468.070, 468.700 to 468.815; Title 43, chapter 520 sections 520.005, 520.095, 520.155-520.330
|
State of Oregon |
| Rural Utilities Service |
|
7 CFR 1755.901(d)(5) |
ASTM D4568 |
1999 |
Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Wire and Cable Materials
|
ASTM International |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 192.911 |
ASME B31.8S |
2004 |
Managing System Integrity of Gas Pipelines
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 86.157-98(f)(3) |
ASTM E29 |
1993 |
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
|
ASTM International |
| Consumer Product Safety Commission |
|
16 CFR 1632.5(b)(2)(ii) |
AATCC 124 |
1996 |
Appearance of Durable Press Fabrics After Repeated Home Laundering
|
American Association of Textile Chemists and Colorists |
| Rural Utilities Service |
|
7 CFR 1728.202(d)(3) |
AWPA P8 |
2008 |
Standard for Oil-Borne Preservatives
|
American Wood Protection Association |
| Coast Guard |
|
46 CFR 78.45-1(a)(2) |
IMO Resolution A.654(16) |
1989 |
Graphical Symbols for Fire Control Plans
|
International Maritime Organization |
| Occupational Safety and Health Administration |
|
29 CFR 1910.94(a)(5)(iii) |
42 CFR 84 |
2014 |
Approval of Respiratory Devices
|
U.S. Department of Health and Human Services |
| Coast Guard |
|
46 CFR 56.30-10(b)(4) |
ASME B16.5 |
2003 |
Pipe Flanges and Flanged Fittings NPS 1/2 through NPS 24 Metric/Inch Standard
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (62) |
EPA Method 200.8 |
1994 |
Metals by ICP-MS, Revision 5.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (24) Sodium |
APHA Method 3111 B |
1999 |
Metals by Flame Atomic Absorption
|
American Public Health Association |
| Coast Guard |
|
46 CFR 160.151-21(x) |
IMO LSA Code |
2010 |
Life-Saving Appliances, including LSA Code
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IA Footote 22 |
EPA Method 1603 |
2009 |
Escherichia coli (E. coli) in Water by Membrane Filtration Using Modified membrane-Thermotolerant Escherichia coli Agar (Modified mTEC)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(10)(lxiv) |
APHA Method 7110 |
2000 |
Gross Alpha and Gross Beta Radioactivity (Total, Suspended, and Dissolved)
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 799.5085(j) Table 3, C7 |
ASTM E1193 |
1997 |
Standard Guide for Conducting Daphnia Magna Life-Cycle Toxicity Tests
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 266, Appendix IX, 4.0 |
EPA-625-3-89-016 |
1989 |
Interim Procedures for Estimating Risks Associated with Exposures to Mixtures of Chlorinated Dibenzo-p-Dioxins and Dibenzofurans (CDDs and CDFs)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.1101 Maximum true vapor pressure (1) |
API 2517 |
1980 |
Evaporation Loss From External Floating-Roof Tanks
|
American Petroleum Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.106(a)(17) |
ASTM D5 |
1965 |
Standard Test Method for Penetration of Bituminous Materials
|
ASTM International |
| Postal Service |
|
39 CFR 20.1 |
USPS Publication |
2009 |
International Mail Manual
|
U.S. Postal Service |
| National Highway Traffic Safety Administration |
|
49 CFR 572.101(a) |
Drawing No. 78051-148 |
1978 |
Skull-Head (cast) Hybrid III
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 571.111 S11 |
SAE J-964 |
1984 |
Test Procedure for Determining Reflectivity of Rear View Mirrors
|
Society of Automotive Engineers |
| Coast Guard |
|
46 CFR 110.10-1(g)(10) |
IEC 79-6 |
1995 |
Electrical Apparatus for Explosive Gas Atmospheres—Part 6: Oil Immersion “o”, Second Edition
|
International Electrotechnical Commission |
| Environmental Protection Agency |
|
40 CFR 80.46(h)(1)(ix) |
ASTM D5191 |
2013 |
Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 315 |
1980 |
Guide for Detailing of Concrete Reinforcement
|
American Concrete Institute |
| Mine Safety and Health Administration |
|
30 CFR 56.6201(b)(2) |
IME Guide |
1993 |
Generic Loading Guide for the IME-22 Container
|
Institute of Makers of Explosives |
| Coast Guard |
|
46 CFR 170.245(b)(2) |
MIL-P-21929B |
1991 |
Plastic Material, Cellular Polyurethane, Foam-in-Place, Rigid (2 Pounds per Cubic Foot
|
U.S. Department of Defense |
| Research and Special Programs Administration |
|
49 CFR 179.102-1(a)(1) |
ASTM A240/A 240M |
1994 |
Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 101A, 7.1.1 |
ASTM D1193 |
1977 |
Standard Specification for Reagent Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(2) |
ASTM C114 |
2009 |
Standard Test Methods for Chemical Analysis of Hydraulic Cement
|
ASTM International |
| Food and Drug Administration |
|
21 CFR 184.1613(b) |
Food Chemicals Codex |
1981 |
Potassium Bicarbonate
|
National Academy Press |
| Coast Guard |
|
46 CFR 125.180(b) |
IMO SOLAS |
1992 |
International Convention for the Safety of Life at Sea
|
International Maritime Organization |