This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Food and Drug Administration | 21 CFR 172.869(b)(11) | Food Chemicals Codex | 1996 | Atomic Absorption Spectrophotometric Graphite Furnace Method, Method I | National Academy Press | |
National Highway Traffic Safety Administration | 49 CFR 572.164(b) | Drawing No. 167–2000 | 2009 | Upper Torso Assembly | Leet-Melbrook | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Heptachlor Epoxide) | EPA Method 551.1 | 1995 | Determination of Chlorination Disinfection Byproducts, Chlorinated Solvents, and Halogenated Pesticides/Herbicides in Drinking Water by Liquid-Liquid Extraction and Gas Chromatography with Electron-Capture Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart JJJJ, Table 2(1)(b)(v) | ASTM D 6522 | 2005 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. M, 3.7, a | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 182.440(a)(1) Table 182.440(a)(1) | ASTM B 209 | 1996 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate | ASTM International | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 207.1 | ICC/IBC | 2003 | International Building Code | International Code Council | |
Coast Guard | 46 CFR 169.703(c)(7)(i) | NFPA 302 | 1980 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Federal Highway Administration | 23 CFR 625.4(d)(1)(i) | AASHTO GDHS-7 | 2011 | A Policy on Geometric Design of Highways and Streets | American Association of State Highway and Transportation Officials | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | APA S812Q | 1992 | Design and Fabrication of Glued Plywood-Lumber Beams, Suppl. 2 | APA--The Engineered Wood Association | |
Minerals Management Service | 30 CFR 250.803(b)(1) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section I | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 111.105-3 | IEC 60079 | 2007 | Electrical Apparatus for Explosive Gas Atmospheres Series | International Electrotechnical Commission | |
National Highway Traffic Safety Administration | 49 CFR 572.15(a) | Drawing No. SA 103C 081 | 1976 | Foot Assembly left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(vii)(A) | ASTM A 569/A 569M | 1991 | Standard Specification for Steel, Carbon (0.15 Maximum Percent), Hot-Rolled Sheet and Strip, Commercial Quality | ASTM International | |
Coast Guard | 46 CFR 160.055-5(b)(4) | Federal Standard 751A | 1977 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Research and Special Programs Administration | 49 CFR 179.220-7(g) | AAR Publication | 2000 | Specification for Tank Cars, Appendix M | Association of American Railroads | |
Rural Utilities Service | 7 CFR 1755.390(k)(10)(ii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (19) | AOAC Method 993.14 | 1998 | Chromium-Total, mg/l | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(8) | ASTM B 117 | 1964 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Food and Drug Administration | 21 CFR 801.410(d)(2) | ASTM D 412 | 1968 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 564 Appendix C III Incorporated Figures | SAE J-1383 | 1985 | Type 2B1 Headlamp Mounting Ring/Lamp Body Dimensional Information | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (29) | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 3 | Annual Book of Standards | 1996 | Annual Book of ASTM Standards, Vols. 11.01 and 11.02 | ASTM International | |
Environmental Protection Agency | 40 CFR 55.14(e)(3)(ii)(F) | 40 CFR part 52, subpart F | 2013 | State of California, Santa Barbara County Air Pollution Control District Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Coast Guard | 21 CFR 172.320(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 60.17(g)(117) | ASTM D 3173 | 1973 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(17) | ANSI J6.1 | 1971 | Rubber Insulating Line Hose | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (28) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 24 | EPA Method 1600 | 2009 | Enterococci in Water by Membrane Filtration Using membrane-Enterococcus Indoxyl-?-D-Glucoside Agar (mEI) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 430.01(i) Table | EPA Method 1613 | 2015 | Tetra-through-Octa-Chlorinated Dioxins and Furans by Isotope Dilution HRGC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.84(d)(1)(i) | ASTM D 86 | 2001 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-558B | 1976 | Insulation Blocks, Boards, Blankets, Felts Sleeving (Pipe and Tub Coverings), and Pipe Fitting Covering, Thermal (Mineral Fiber, Insulation Type) | Federal Specifications Standards and Test Methods | |
Research and Special Programs Administration | 46 CFR 113.65-5 | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 63.4141(b)(1) | ASTM D 2697 | 1998 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings | ASTM International | |
Food and Drug Administration | 21 CFR 177.1020(c)(2) | FDA Publication | 1989 | Determination of Residual Acrylonitrile and Styrene Monomers Gas Chromatographic Internal Standard Method | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 52.741(x)(1)(i) | 35 I.A.C. 215, Subpart B | 1989 | Administrative Code | State of Illinois | |
Coast Guard | 46 CFR 183.340(b)(4) | ABYC E-9 | 1990 | Direct Current (DC) Electrical Systems on Boats | American Boat and Yacht Council | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.8(a)(1) | API RP 80 | 2000 | Guidelines for the Definition of Onshore Gas Gathering Lines | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Diazinon) | EPA Method 614 | 1993 | Organophosphorous Pesticides by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.7(e)(19) | ASTM D 3238 | 2005 | Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method | ASTM International | |
Coast Guard | 46 CFR 28.40(b) | NFPA 302 | 1989 | Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Coast Guard | 46 CFR 170.015(d)(2) | IMO Resolution MSC 267(85) | 2008 | Adoption of the International Code on Intact Stability, 2008 (2008 IS Code) | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (33) | USGS I-4471-97 | 1997 | Metals by Inductively Coupled Plasma | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 147.1400(a)(2) | NEUIC regulations | 1988 | Revised Statutes of Nebraska, sections 57-903 and 57-906 | State of Nebraska | |
Food and Drug Administration | 21 CFR 172.320(b)(2) | NAS/NRC Publication | 1972 | Specifications and Criteria for Biochemical Compounds, 3rd Edition | National Academy of Sciences, National Research Council | |
Consumer Product Safety Commission | 16 CFR 1616.5(c)(4)(i) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.113 | ASTM A 671 | 2004 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(w)(2) | UL 80 | 1963 | Steel Inside tanks for Oil-Burner Fuel | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.132-21(a)(1) | IMO MSC.1/Circular 1205 | 2006 | Guidelines for Developing Operation and Maintenance Manuals for Lifeboat Systems | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.181 Table A | Drawing No. 175-3000 | 2009 | Shoulder assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation |