This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 30 CFR 250.1703(b) | ANSI/API Spec. 11D1 | 2009 | Packers and Bridge Plugs | American National Standards Institute | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F 1172 | 1993 | Fuel Oil Meters of the Volumetric Positive Displacement Type | ASTM International | |
Federal Communications Commission | 47 CFR 80.1101(c)(12)(iii) | IEC 61162-1 | 2000 | Maritime Navigation and Radiocommunication Equipment and Systems--Digital interfaces--Part 1: Single Talker and Multiple Listeners | International Electrotechnical Commission | |
Rural Utilities Service | 7 CFR 1755.860(n)(5) | ASTM D 4565 | 1990 | Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.274(f)(1)(v) | ISO 4126-1 | 1991 | Safety Valves | International Organization for Standardization | |
Federal Trade Commission | 16 CFR 460.5(e)(1)(i) | ASTM C 177 | 2004 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded Hot-Plate Apparatus | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.100(b)(1) | Drawing No. 92041-001 | 1992 | Head Form Assembly | Reprographic Technologies | |
Coast Guard | 46 CFR 181.425(a) | UL 710 | 1993 | Exhaust Hoods for Commercial Cooking Equipment | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 60.564(j)(1)(i) | ASTM D 3370 | 1996 | Standard Practices for Sampling Water | ASTM International | |
Environmental Protection Agency | 40 CFR 260.11(c)(3)(vi) | EPA Method 1330A | 1992 | Extraction Procedure for Oily Wastes (and in Basic Manual I) | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 114.600(b) | UL 1102 | 1992 | Non integral Marine Fuel Tanks | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(5) | Drawing No. SA-SID-M060 | 1994 | Title not specified | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IE (2) | ASTM D 1943 | 1996 | Standard Test Method for Alpha Particle Radioactivity of Water | ASTM International | |
Food and Drug Administration | 21 CFR 173.357(a)(2) | FDA Publication | 1977 | Methodology for Ethylene-dichloride Detection in Polyethylenimine | Food and Drug Administration, U.S. Department of Health and Human Services | |
Health and Human Services Department | 45 CFR 162.1302(b)(2)(ii) | ASC X12N 278 | 2006 | Health Care Services Review--Request for Review and Response | Washington Publishing Company | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(82) | API MPMS | 2005 | Chapter 5—Metering, Section 8—Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology; First Edition | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (82) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 9 | ANSI/PIMA IT4.37 | 1975 | Photographic Processing Effluents | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 445.10 | 40 CFR Part 264 | 2015 | Standards for Owners and Operators of Hazardous Waste Treatment, Storage, and Disposal Facilities, Subpart N-(Landfills) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.364(e)(4) | ASME MFC-7M | 1987 | Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | FedSpec HH-I-1972/1 | 1981 | Polyurethane or Polyisocyanurate Insulation Board Faced with Aluminum Foil on Both Sides | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60.17(g)(81) | ASTM D 2015 | 1977 | Standard Test Method for Gross Calorific Value of Solid Fuel by the Adiabatic Bomb Calorimeter | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (2-Methyl-4-chlorophenoxyacetic acid) | EPA Method 1658 | 1993 | Phenoxy Acid Herbicides by Liquid/Liquid Extraction, Derivitization, and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 211.203(x) | ANSI S3.19 | 1974 | Method for the Measurement of Real-Ear Protection of Hearing Protectors and Physical Attenuation of Earmuffs | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63.772(h)(6)(iv) | EPA-600-R-97-121 | 1997 | EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards, as amended August 25, 1999 | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM B 251 | 1993 | Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(l)(1) | MSHA Handbook Number: PH-08-V-1 | 2008 | General Coal Mine Inspection Procedures and Inspection Tracking System | Mine Safety and Health Administration, U.S. Department of Labor | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.264(b)(1) | NFPA 30 | 2003 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Coast Guard | 40 CFR 444.12(b)(1) Table (8) | USGS I-3765-85 | 1985 | Solids, residue suspended evaporation 105 degrees C | U.S. Geological Survey | |
Energy Department | 10 CFR 430 Subpart B, App. M, 2.4.2 | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Centers for Medicare & Medicaid Services | 42 CFR 485.623(d)(1)(i) | NFPA 101 | 2000 | Life Safety Code | National Fire Protection Association | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (25) | APHA Method 4500-F D | 1997 | Fluoride by SPADNS Method | American Public Health Association | |
Coast Guard | 33 CFR 127.003(b) | ANSI S12.13 | 1986 | Performance Requirements for Combustible Gas Detectors | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 761.19(a)(12) | ASTM D 2709 | 1988 | Standard Test Method for Water and Sediment in Distillate Fuels by Centrifuge | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.505(e)(7)(i) | NFPA 1983 | 2001 | Standard on Fire Service Life Safety Rope and System Components | National Fire Protection Association | |
Coast Guard | 46 CFR 160.041-4(a) | NIST R-178 | 1941 | Packaging of First-Aid Unit Dressings and Treatments | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.22 | 2001 | Wrought Copper and Copper Alloy Solder Joint Pressure Fittings | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (60) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.253(f)(6)(i)(I) | NFPA 80 | 1970 | Standard for Fire Doors and Windows | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 184.1077(b) | Food Chemicals Codex | 1981 | Potassium Acid Tartrate | National Academy Press | |
Coast Guard | 46 CFR 58.10-5(b)(3)(i) | UL 1111 | 1988 | Marine Carburetor Flame Arresters | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.156-5(b)(5) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Environmental Protection Agency | 40 CFR 1066.425(j)(1)(iv) | SAE J-2951 | 2014 | Drive Quality Evaluation for Chassis Dynamometer Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.131(d)(2) | EPA Method 300.0 | 1993 | Ion chromatography - anions, Revision 2.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(78) | ASTM D 6420 | 2004 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Coast Guard | 21 CFR 184.1141b(b) | Food Chemicals Codex | 1981 | Ammonium Phosphate, Dibasic | National Academy Press | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA Method 531.1 | 1995 | Measurement of N-Methylcarbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post Column Derivatization | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41da Anthracite | ASTM D 388 | 1999 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 62.16015(e)(3)(i) | EPA-454/R-98-015 | 1997 | OAQPS Fabric Filter Bag Leak Detection Guidance | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 75.6(b)(2) | ASME MFC-4M | 1986 | Measurement of Gas Flow by Turbine Meters | American Society of Mechanical Engineers |