| Environmental Protection Agency |
|
40 CFR 98.254(i)(2) |
ASTM D5291 |
2007 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.254(i)(3) |
ASTM D5373 |
2008 |
Standard Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.256(o)(2)(i) |
EPA AP 42, Section 5.2 |
2008 |
AP 42, Section 5.2, Transportation and Marketing of Petroleum Liquids
|
U.S. Environmental Protection Agency |
| Energy Department |
|
10 CFR 431.96 (b)(2) Table 1 |
AHRI 210/240-2008 |
2008 |
Standard for Unitary Air-Conditioning & Air-Source Heat Pump Equipment
Archived
|
Air Conditioning, Heating, and Refrigeration Institute |
| Energy Department |
|
10 CFR 431.96 (b)(2) Table 1 |
AHRI 340/360-2007 |
2007 |
2007 Standard for Performance Rating of Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipmen
|
Air Conditioning, Heating, and Refrigeration Institute |
| Energy Department |
|
10 CFR 431.96 (b)(2) Table 1 |
ISO Standard 13256-1 (1998) |
1998 |
Water-source heat pumps—Testing and rating for performance—Part 1: Water-to-air and brine-to-air heat pumps
|
International Organization for Standardization |
| Energy Department |
|
10 CFR 431.96 (b)(2) Table 1 |
ASHRAE 127-2007 |
2007 |
Method of Testing for Rating Computer and Data Processing Room Unitary Air Conditioners
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Energy Department |
|
10 CFR 431.96 (c) |
AHRI 390-2003 |
2003 |
2003 Standard for Performance Rating of Single Package Vertical Air-Conditioners and Heat Pumps
|
Air Conditioning, Heating, and Refrigeration Institute |
| Energy Department |
|
10 CFR 431.96 (c) |
AHRI 210/240-2008 |
2008 |
2008 Standard for Performance Rating of Unitary Air-Conditioning & Air-Source Heat Pump Equipment
|
Air Conditioning, Heating, and Refrigeration Institute |
| Energy Department |
|
10 CFR 431.96 (c) |
AHRI 1230-2010 |
2010 |
2010 Standard for Performance Rating of Variable Refrigerant Flow (VRF) Multi-Split Air-Conditioning and Heat Pump Equipment
|
Air Conditioning, Heating, and Refrigeration Institute |
| Energy Department |
|
10 CFR 431.96 (c) |
ASHRAE 127-2007 |
2007 |
Method of Testing for Rating Computer and Data Processing Room Unitary Air Conditioners
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Energy Department |
|
10 CFR 431.96 (d) |
AHRI 1230-2010 |
2010 |
2010 Standard for Performance Rating of Variable Refrigerant Flow (VRF) Multi-Split Air-Conditioning and Heat Pump Equipment
|
Air Conditioning, Heating, and Refrigeration Institute |
| Energy Department |
|
10 CFR 431.96 (g)(1) |
AHRI 310/380-2014 |
2014 |
Standard for Packaged Terminal Air-Conditioners and Heat Pumps
|
Air Conditioning, Heating, and Refrigeration Institute |
| Energy Department |
|
10 CFR 431.96 (g)(1) |
ANSI/ASHRAE 37 |
2009 |
Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Energy Department |
|
10 CFR 431.96 (g)(1) |
ANSI/ASHRAE 16 |
1983 |
Method of Testing for Rating Room Air Conditioners and Packaged Terminal Air Conditioners
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Energy Department |
|
10 CFR 431.96 (g)(2) |
AHRI 310/380-2014 |
2014 |
Standard for Packaged Terminal Air-Conditioners and Heat Pumps
|
Air Conditioning, Heating, and Refrigeration Institute |
| Energy Department |
|
10 CFR 431.96 (g)(2) |
ANSI/ASHRAE 37 |
2009 |
Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Energy Department |
|
10 CFR 431.96 (g)(2) |
ANSI/ASHRAE 58 |
1986 |
Method of Testing for Rating Room Air-Conditioner and Packaged Terminal Air-Conditioner Heating Capacity
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Energy Department |
|
10 CFR 431.96 (g)(4) |
AHRI 310/380-2014 |
2014 |
Standard for Packaged Terminal Air-Conditioners and Heat Pumps
|
Air Conditioning, Heating, and Refrigeration Institute |
| Energy Department |
|
10 CFR 433.2 |
ANSI/ASHRAE/IESNA Standard 90.1-2004 |
2004 |
Energy Standard for Buildings Except Low-Rise Residential Buildings
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Energy Department |
|
10 CFR 433.2 |
ANSI/ASHRAE/IESNA Standard 90.1-2007 |
2007 |
Energy Standard for Buildings Except Low-Rise Residential Buildings
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Energy Department |
|
10 CFR 433.2 |
ANSI/ASHRAE/IESNA Standard 90.1-2010 |
2010 |
Energy Standard for Buildings Except Low-Rise Residential Buildings
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Energy Department |
|
10 CFR 433.2 |
ANSI/ASHRAE/IES Standard 90.1-2013 |
2013 |
Energy Standard for Buildings Except Low-Rise Residential Buildings
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Federal Highway Administration |
|
23 CFR 625.4(a) |
AASHTO Interstate Standards |
2011 |
A Policy on Geometric Design of Highways and Streets
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(b)(1) |
AASHTO Standard Specifications for Highway Bridges, 17th ed. |
2002 |
Standard Specifications for Highway Bridges
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(b)(6) |
D1.4/D1.4M |
2011 |
Structural Welding Code-Reinforcing Steel
|
American Welding Society |
| Federal Highway Administration |
|
23 CFR 625.4(d)(1)(i) |
AASHTO GDHS-7 |
2011 |
A Policy on Geometric Design of Highways and Streets
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(d)(1)(ii) |
A Policy on Design Standards-Interstate System |
2016 |
A Policy on Design Standards—Interstate System
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(d)(1)(iii) |
AASHTO Standard Specifications for Highway Bridges, 17th ed. |
2002 |
Standard Specifications for Highway Bridges
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(d)(1)(vi) |
AASHTO-LRFD Bridge Construction Specifications, 4th Ed. |
2017 |
AASHTO-LRFD Bridge Construction Specifications
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(d)(1)(v) |
AASHTO LRFD-8 |
2017 |
LRFD Bridge Design Specifications
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(d)(1)(vi) |
AASHTO LRFD, 2nd ed. |
2007 |
AASHTO LRFD Movable Highway Bridge Design Specifications
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(d)(1)(vii) |
AASHTO/AWS D1.5M/D1.5 |
2015 |
Bridge Welding Code
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(d)(1)(vii)(A) |
AASHTO BWC-7-I1-OL |
2018 |
AASHTO BWC-7-I1-OL, 2018 Interim Revisions to AASHTO/AWS D1.5M/D1.5: 2015 Bridge Welding Code
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(d)(1)(Viii) |
AASHTO LTS-6 |
2013 |
Standard Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(d)(1)(viii)(A) |
AASHTO LTS-6-I1 |
2015 |
Interim Revisions to Standard Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(d)(1)(ix) |
AASHTO LRFDLTS-1 |
2015 |
LRFD Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(d)(1)(ix)(A) |
AASHTO LRFDLTS-1-I1-OL |
2017 |
Interim Revisions to LRFD Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(d)(1)(ix)(B) |
AASHTO LRFDLTS-1-I2-OL |
2018 |
Interim Revisions to LRFD Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(d)(1)(x) |
AASHTO LRFDLTS-1-I4, 2020 |
2017 |
Transportation Materials
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(d)(2) |
D1.4/D1.4M |
2011 |
Structural Welding Code—Reinforcing Steel
|
American Welding Society |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.292 (j) |
API RP 14C |
2001 |
Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms, Flow schematics and Safety Analysis Function Evaluation (SAFE) charts
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.800(b) |
API RP 14J |
2001 |
Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.800(c)(2) |
API RP 2RD |
1998 |
Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs)
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.800(c)(3) |
API RP 2SK |
2005 |
Design and Analysis of Stationkeeping Systems for Floating Structures
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.800(c)(3) |
API RP 2SM |
2001 |
Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.801(b) |
ANSI/API Spec. Q1 |
2013 |
Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.901(a)(1) |
ACI 318R-95 |
1995 |
Commentary on Building Code Requirements for Reinforced Concrete
|
American Concrete Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.901(a)(2) |
ACI 357R-84 |
1984 |
Guide for the Design and Construction of Fixed Offshore Concrete Structures
|
American Concrete Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.901(a)(3) |
ANSI/AISC 360-05 |
2005 |
Specification for Structural Steel Buildings
Archived
|
American Institute of Steel Construction |