DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 431.86(c)(1)(iv) | HI BTS-2000 | 2001 | Method to Determine Efficiency of Commercial Space Heating Boilers | Hydronics Institute | |
Coast Guard | 46 CFR 160.151-7(a) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1060.515(a)(1) | ASTM D 471 | 1998 | Standard Test Method for Rubber Property--Effect of Liquids | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (7) | EPA Method 245.1 | 1994 | Mercury by Cold Vapor Atomic Absorption | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.74(c)(6) | ASTM D 5291 | 2007 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Isobutyraldehyde) | EPA Method 1667 | 2014 | Formaldehyde, Isobutyraldehyde, and Furfural by Derivatization Followed by High Performance Liquid Chromatography | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.1050(a)(6) | MDUIC regulations | 1989 | Code of Maryland Regulations, Title 26, Subtitle 13, Chapter 05, section .19, promulgated and effective as of August 1, 1989 | State of Maryland | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(c) | ASTM D 2013/D 2013M | 2009 | Standard Practice for Preparing Coal Samples for Analysis | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.218(j)(5) | ANSI B7.1 | 1970 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 11.2.2 | ASTM D 2369 | 1995 | Standard Test Method of Volatile Content for Coatings | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(1) | ASTM D 86 | 2012 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1826 | 2011 | Standard Specification for Live Line and Measuring Telescoping Tools | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(64) | ASTM B 283 | 1996 | Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed) | ASTM International | |
Coast Guard | 46 CFR 111.105-11(d) | ISA RP 12.6 | 1995 | Wiring Practices for Hazardous (Classified) Locations Instrumentation Part I: Intrinsic Safety | International Society for Measurement and Control | |
Research and Special Programs Administration | 49 CFR 195.452(h)(4)(i)(B) | ASME B31G | 1991 | Manual for Determining the Remaining Strength of Corroded Pipelines | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 435.11(ee) | EPA Method 1644 | 2015 | Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 55.14(e)(17)(i)(A) | 40 CFR part 52, subpart II. | 1992 | State of North Carolina Air Pollution Control Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(4)(ix) | NFPA 13 | 2002 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 121.240(h) | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.83 | Drawing No. LP 1049-1 through LP1049-16 | 1979 | 9-month old Dummy Components and Parts | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 52b.12(c)(7)(i) | NFPA 45 | 1996 | Standard on Fire Protection for Laboratories Using Chemicals | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 178.337-16(b)(2) | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B1.20.1 | 1983 | Pipe Threads, General Purpose (Inch) | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 184.1135(b) | Food Chemicals Codex | 1981 | Ammonium Bicarbonate | National Academy Press | |
Transportation Security Administration | 49 CFR 1546.209(g) | ASTM F 792 | 1993 | Standard Practice for Design and Use of Ionizing Radiation Equipment for the Detection of Items Prohibited in Controlled Access Areas | ASTM International | |
Federal Aviation Administration | 14 CFR 36 Appendix F36.105(b) | IEC 179 | 1973 | Precision Sound Level Meters | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (98) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | EPA Method 415.3 | 2005 | Determination of Total Organic Carbon and Specific UV Absorbance at 254 nm in Source Water and Drinking Water, Revision 1.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 62.15130(c)(2) | ASME QRO-1 | 1994 | Standard for the Qualification and Certification of Resource Recovery Facility Operators | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (63) | AOAC Method 973.54 | 1990 | Sodium in Water - Atomic Absorption Spectrophotometric Method | AOAC International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (25) Temperature | APHA Method 2550 | 1998 | Temperature | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.41c Coal | ASTM D 388 | 1998 | Standard Classification of Coals by Rank | ASTM International | |
Food and Drug Administration | 21 CFR 177.2400(c)(1) | FDA Publication | 1989 | Qualitative Identification of Kalrez by Infrared Examination of Pyrolystate | Food and Drug Administration, U.S. Department of Health and Human Services | |
Federal Aviation Administration | 14 CFR 36.6(c)(1)(v) | IEC 804 | 1985 | Integrating-averaging Sound Level Meters | International Electrotechnical Commission | |
Coast Guard | 29 CFR 1910.6(e)(73) | ANSI Z89.1 | 2009 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASME B30.22 | 2005 | Articulating Boom Cranes | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1728.97(a)(23) | RUS Bulletin 1728F-804 (D-804) | 2005 | Specification and Drawings for 12.47/7.2 kV Line Construction | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24A, Section 7.1 | ASTM D 1475 | 1990 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Rural Utilities Service | 7 CFR 1728.97(a)(8) | RUS Bulletin 50–33 (D–5) | 1951 | RUS Specification for Single and Double Upset Spool Bolts | Rural Utilities Service, U.S. Department of Agriculture | |
National Highway Traffic Safety Administration | 49 CFR 571.126 S6.2.2 | ASTM E 1337 | 2008 | Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire | ASTM International | |
Coast Guard | 46 CFR 56.80-5 | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200.942(a)(1)(x) | ASTM D 297 | 1981 | Standard Methods for Rubber Products--Chemical Analysis | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.153(a) | Drawing No. TE-3200-100 | 2001 | Headform | Reprographic Technologies | |
Rural Utilities Service | 7 CFR 1728.97(e)(10) | AWPA P1/P13 | 2006 | Standard for Creosote Preservative | American Wood Protection Association | |
Energy Department | 10 CFR 431.133(b)(1) | ARI 810 | 2003 | Performance Rating of Automatic Commercial Ice-Makers | Air Conditioning and Refrigeration Institute | |
Environmental Protection Agency | 40 CFR 90.7(b)(1) Table | ASTM D 3231 | 1989 | Standard Test Method for Phosphorous in Gasoline | ASTM International | |
Rural Utilities Service | 7 CFR 1755.890(o)(2) | RUS Bulletin 345-54, PE-52 | 1971 | RUS Specification for Telephone Cable Splicing Connectors | Rural Utilities Service, U.S. Department of Agriculture | |
Coast Guard | 46 CFR 160.156-7(b)(8)(ii)(B) | UL 1185 | 1996 | Standard for Safety for Portable Marine Fuel Tanks, Fourth Edition | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (3) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/mass Spectrometric Method | American Public Health Association |