This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 261.1033(e)(2) | ASTM D 2382 | 1976 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 63.11920(a)(3)(i) | TCEQ Sampling Procedures Manual | 2003 | Appendix P: Cooling Tower Monitoring, Air Stripping Method (Modified El Paso Method) for Determination of Volatile Organic Compound Emissions from Water Sources, Revision Number One | Texas Commission on Environmental Quality | |
Coast Guard | 21 CFR 137.300(b)(2) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 49 CFR 192.283(a)(1)(ii) | ASTM D 2517 | 2000 | Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1001(h) | SAE J-395 | 1974 | Minimum Performance Criteria for Roll-Over Protective Structures for Crawler Tractors and Crawler-Type Loaders | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.902(r)(16)(i) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
Energy Department | 10 CFR 431.20(c)(4) | CSA C390 | 1993 | Energy Efficiency Test Methods for Three-Phase Induction Motors, Test Method (1) | Canadian Standards Association | |
Rural Utilities Service | 7 CFR 1755.902(l)(9) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S14.6.2.1.1(a) | 29 CFR 1910.106 | 2013 | Storage of Flammable and Combustible Liquids | Occupational Safety and Health Administration, U.S. Department of Labor | |
Housing and Urban Development Department | 24 CFR 3285.4(h)(1) | NFPA 31 | 2001 | Standard for the Installation of Oil-Burning Equipment | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.163 | ANSI/NFPA 11B | 2014 | Synthetic Foam and Combined Agent Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 90, Subpart D, Appendix A, Table 3 | ASTM D 2699 | 1992 | Standard Test Method for Knock Characteristics of Motor Fuels by the Research Method | ASTM International | |
Health and Human Services Department | 45 CFR 162.920(c)(1)(ii) | CAQH Publication | 2011 | Phase I CORE 153: Eligibility and Benefits Connectivity Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
National Highway Traffic Safety Administration | 49 CFR 572.126(a) | Drawing No. 127-4000-2 | 1987 | Leg Assembly | Reprographic Technologies | |
Minerals Management Service | 30 CFR 250.1203(b)(2)(iii) | AGA Report No. 9 | 2007 | Measurement of Gas by Multipath Ultrasonic Meters; Second Edition | American Gas Association | |
Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(10) | SAE J-845 | 1997 | Optical Warning Devices for Authorized Emergency, Maintenance, and Service Vehicles | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC Footnote 1 | EPA Method 1613 B | 1997 | Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution GC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.402(c)(2) Table Note 2 | APHA Standard Methods, 20th Edition | 1998 | Standard Methods for the Examination of Water and Wastewater. 20th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(l)(12) | EPA SW-846-6010C | 2007 | Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 3 | U.S. Environmental Protection Agency | |
Federal Trade Commission | 16 CFR 460.5(a)(1) | FedSpec HH-I-530A | 1971 | Insulation, Board, Thermal (Urethane) | Federal Specifications Standards and Test Methods | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 170.270(c)(1) | ASTM F 1196 | 1994 | Standard Specification for Sliding Watertight Door Assemblies | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 66 | Mitchell Method M5271 | 2008 | Determination of Turbidity by Nephelometry. Revision 1.0 | Leck Mitchell | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Chlorobenzene) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.45(f)(4)(i) | ASTM D 388 | 1990 | Standard Classification of Coals by Rank | ASTM International | |
Coast Guard | 46 CFR 105.3(b)(1) | ASTM D 323-08 | 2008 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 79.56(e)(3)(ii)(A)(4) | ASTM D 975 | 1993 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(77) | API RP 90 | 2006 | Annular Casing Pressure Management for Offshore Wells | American Petroleum Institute | |
Food and Drug Administration | 21 CFR 177.1360(d) | KCL Publication | 1987 | Analytical Method of Determining the Amount of EVOH in the Extractive Residue of EVOH Film | Kuraray Co., Ltd. | |
Coast Guard | 46 CFR 56.01-2(d)(10) | ASME B16.11 | 2001 | Forged Fittings, Socket-Welding and Threaded | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 177.1990(c)(3) | FDA Publication | 1986 | Residual Methyl Acrylate and Vinylidene Chloride Monomers in Saran MA/VDC Resins and Pellets by headspace Gas Chromatography | Food and Drug Administration, U.S. Department of Health and Human Services | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(13) | API RP 2T | 1997 | Planning, Designing and Constructing Tension Leg Platforms | American Petroleum Institute | |
Coast Guard | 46 CFR 154.172 Table 1 | ABS Publication | 1981 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Food and Drug Administration | 21 CFR 177.1390(c)(3)(i)(A)(2) | FDA Publication | 1949 | Determination of Non-Volative Chloroform Soluble Residues in Retort Pouch Water Extractives | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 60.58a(h)(6)(ii) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 184.1978(b) | Food Chemicals Codex | 1981 | Carnauba Wax | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1452(b) | Food Chemicals Codex | 1981 | Manganese Gluconate | National Academy Press | |
Coast Guard | 46 CFR 199.05(b) | IMO Resolution MSC.5(48) | 1993 | International Code for the Construction and Equipment of Ships carrying Liquefied Gases in Bulk, (IGC Code) | International Maritime Organization | |
Coast Guard | 46 CFR 162.039-3(e) | MIL-STD-167 | 1993 | Mechanical Vibrations of Shipboard Equipment | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (13) | ASTM D 511A | 2003 | Calcium by EDTA Titration | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(lv) | ASTM D 5257 | 2003 | Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(j) Table 3, C7 | ASTM E 729 | 1996 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.71(b) Table A | Drawing No. SA 106C 030 | 1997 | Thorax Assembly, Revision C | Reprographic Technologies | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM A 109 | 1991 | Standard Specification for Steel, Strip, Carbon Cold-Rolled | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.151(a)(2) | RT Publication | 2001 | Procedures for Assembly, Disassembly and Inspection (PADI) Subpart R, CRABI 12-Month-Old Infant Crash Test Dummy (CRABI-12, Alpha version) | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Pentachlorophenol) | EPA Method 1625 | 1984 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272, Subpart V | MDHWMP | 1995 | State of Maryland Hazardous Waste Management Program (Reserved) | State of Maryland | |
Environmental Protection Agency | 40 CFR 75, Appendix A, Section 5.1.5 | EPA-600-R-97-121 | 1997 | EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 111.60-3(c) | IEEE 45 | 2002 | Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-Saving Appliances and Arrangements | Institute of Electrical and Electronics Engineers | |
Research and Special Programs Administration | 49 CFR 195.118(a) | ASME B16.9 | 2004 | Factory Made Wrought Steel Buttwelding Fittings | American Society of Mechanical Engineers |