Environmental Protection Agency |
|
40 CFR 272, Subpart UU |
VTHWMP |
2015 |
State of Vermont Hazardous Waste Management Program (Reserved)
|
State of Vermont |
Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(a)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
Housing and Urban Development Department |
|
24 CFR 3280.604(b)(2) |
ASSE 1008 |
1986 |
Performance Requirements for Household Food Waste Disposer Units
|
American Society of Sanitary Engineering |
Federal Communications Commission |
|
47 CFR 80.1101(d)(1)(iv) |
IMO Resolution A.694(17) |
1991 |
General Requirements for Shipborne Radio Equipment Forming Part of the Global Maritime Distress and Safety System and for Electronic Navigational Aids
|
International Maritime Organization |
Coast Guard |
|
46 CFR 96.07-5(b)(1) |
ABS Publication |
2013 |
All ABS Standards
|
American Bureau of Shipping |
Environmental Protection Agency |
|
40 CFR 55.14(e)(2)(i)(A) |
40 CFR part 52, subpart C |
2000 |
State of Alaska Requirements Applicable to OCS Sources
|
U.S. Environmental Protection Agency |
Mine Safety and Health Administration |
|
30 CFR 77.403-2 |
SAE J-995 |
1969 |
Mechanical and Quality Requirements for Steel Nuts
|
Society of Automotive Engineers |
Environmental Protection Agency |
|
40 CFR 98.7(e)(26) |
ASTM D5291 |
2007 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
|
State of California |
Rural Utilities Service |
|
7 CFR 1755.860(j)(3)(ii) |
ASTM D1248 |
1989 |
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60.296(b)(3) |
ASTM D240 |
1976 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(4) |
CGA G-7.1 |
1966 |
Commodity Specification
|
Compressed Gas Association |
Coast Guard |
|
46 CFR 153.0(a)(2) |
IMO Resolution MEPC 19(22) |
1985 |
IMO International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk
|
International Maritime Organization |
National Highway Traffic Safety Administration |
|
49 CFR 572.146(d) |
Drawing No. 210-3800 |
1994 |
No title given
|
Reprographic Technologies |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Disulfoton) |
EPA Method 614 |
1993 |
Organophosphorous Pesticides by Liquid/Liquid Extraction and GC/ECD
|
U.S. Environmental Protection Agency |
Energy Department |
|
10 CFR 430 Subpart B, App. N, 10.2.2 |
ASHRAE 103 |
1993 |
Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
Nuclear Regulatory Commission |
|
10 CFR 50.55a(f)(4)(i) |
NRC Regulatory Guide 1.192 |
2003 |
Operation and Maintenance Code Case Acceptability, ASME OM Code
|
U.S. Nuclear Regulatory Commission |
Federal Railroad Administration |
|
49 CFR 229 Appendix F Verification Guidance (a)(4) |
ATCS Specification 130 |
2013 |
Software Quality Assurance
|
Association of American Railroads |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (19) |
ASTM D5812 |
2002 |
Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 143.4(b) Table (Aluminum) |
APHA Method 3113 B |
1992 |
Metals by Graphite Furnace Atomic Absorption
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(a) |
ASTM D4057 |
2006 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products, including Annex A1
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 141.24(e)(1) Table (Heptachlor) |
EPA Method 508 |
1995 |
Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 60.104a(d)(5) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1910.156(e)(4)(i) |
NIOSH Publication |
1976 |
Development of Criteria for Firefighters Gloves; Vol. II, Part II; Test Methods
|
National Institute for Occupational Safety and Health |
Coast Guard |
|
30 CFR 75.1107-17 |
NFPA 15 |
1969 |
Standard for Water Spray Fixed Systems for Fire Protection
|
National Fire Protection Association |
National Highway Traffic Safety Administration |
|
49 CFR 572.41(a)(6) |
Drawing No. SA-SID-M081 |
1987 |
Leg Assembly, Left
|
Reprographic Technologies |
Coast Guard |
|
40 CFR 136.3(a) Table IB (35) |
EPA Method 245.2 |
1974 |
Mercury by Cold Vapor Atomic Absorption
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (35) |
AOAC Method 977.22 |
1990 |
Mercury in Water - Flameless Atomic Absorption Spectrophotometric Method
|
AOAC International |
Environmental Protection Agency |
|
40 CFR 503.8(b)(2) |
APHA Method 9221 E |
1992 |
Fecal Coliform Procedure
|
American Public Health Association |
Coast Guard |
|
46 CFR 56.60-1(b) Table 56.60-1(a) |
ASTM B315 |
1993 |
Seamless Copper Alloy Pipe Tube
|
ASTM International |
Coast Guard |
|
21 CFR 131.206(e) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
Research and Special Programs Administration |
|
49 CFR 195.264(b)(1) |
API 12F |
1994 |
Specification for Shop Welded Tanks for Storage of Production Liquids
|
American Petroleum Institute |
Coast Guard |
|
40 CFR 444.12(b)(1) Table (11) |
ASTM D1691B |
1990 |
Standard Test Methods for Zinc in Water, Atomic Absorption, Chelation-Extraction
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 272.1651(c)(1) |
NYHWMP |
1988 |
New York State Statutes and Regulations for Approved State Hazardous Waste Management Programs
|
State of New York (NY) |
Federal Motor Carrier Safety Administration |
|
49 CFR 393.24(b) |
SAE J-583 |
2004 |
Front Fog Lamp
|
Society of Automotive Engineers |
Housing and Urban Development Department |
|
24 CFR 100.201 Building entrance on an accessible route |
CABO/ANSI A117.1 |
1992 |
American National Standard: Accessible and Usable Buildings and Facilities
|
International Code Council |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (17) |
EPA Method 625 |
1982 |
Base/Neutrals and Acids by GC/MS
|
U.S. Environmental Protection Agency |
Food and Drug Administration |
|
21 CFR 165.110(b)(4)(iii)(E)(12)(i) |
EPA-600-4-79-020 |
1983 |
Method 270.2--Atomic Absorption: furnace technique
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 63.782, Nuclear specialty coating |
ASTM D3912 |
1980 |
Standard Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants
|
ASTM International |
Energy Department |
|
10 CFR 430 Subpart B, App. O, 3.1.2 |
ANSI Z11.182 |
1965 |
Standard Method of Test for Smoke Density in the Flue Gases from Distillate Fuels
|
American National Standards Institute |
Coast Guard |
|
46 CFR 162.161-6(b) |
UL 2127 |
2001 |
Standard for Safety for Inert Gas Clean Agent Extinguishing System Units
|
Underwriters Laboratories, Inc. |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (30) |
USGS I-4471-97 |
1997 |
Metals by Inductively Coupled Plasma
|
U.S. Geological Survey |
Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (3) Arsenic |
APHA Method 3113 B |
1995 |
Metals by Graphite Furnace Atomic Absorption
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 55.14(d)(16)(i) |
40 CFR part 52, subpart HH |
2007 |
State of New York Requirements Applicable to OCS Sources
|
U.S. Environmental Protection Agency |
Energy Department |
|
10 CFR 430.3(j)(4) |
EPA Publication |
2008 |
ENERGY STAR Program Requirements for Single Voltage External Ac-Dc and Ac-Ac Power Supplies, Eligibility Criteria (Version 2.0)
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IH Footnote 4 |
USGS Publication |
1989 |
Techniques of Water-Resource Investigations, Book 5, Laboratory Analysis, Chapter A4, Methods for Collection and Analysis of Aquatic Biological and Microbiological Samples
|
U.S. Geological Survey |
Environmental Protection Agency |
|
40 CFR 432.2(l) |
EPA Method 300.0 |
1993 |
Determination of Inorganic Anions by Ion Chromatography (Revision 2.1)
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 80.613(e)(3)(iii)(C) |
ASTM E29 |
2002 |
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200.946(a)(1)(xiii) |
EIMA Test Method 101.03 |
1995 |
Standard Test Method for Determining the Tensile Adhesion Strength of an Exterior Insulation and Finish System (EIFS), Class PB (modified ASTM C297-91)
|
Exterior Insulation Manufacturers Association |
Research and Special Programs Administration |
|
49 CFR 173.115(a)(2) |
ASTM E681 |
1985 |
Standard Test Method for Concentration Limits of Flammability of Chemicals
|
ASTM International |
Coast Guard |
|
33 CFR 183.5(b) |
IEEE 45 |
1983 |
Recommended Practice for Electrical Installations on Shipboard—Cable Construction
|
Institute of Electrical and Electronics Engineers |