This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Veterans Affairs Department | 38 CFR 17.1(b)(1) | NFPA 10 | 2010 | Portable Fire Extinquishers | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (46) | EPA Method 508 | 1995 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 440 Appendix A | AAMA 1002.10 | 1983 | Voluntary Specifications for Aluminum Insulating Products for Windows and Sliding Glass Doors | American Architectural Manufacturers Association | |
Environmental Protection Agency | 40 CFR 147.2400(a)(1) | WAUIC regulations | 1983 | Revised Code of Washington section 90.48.020, 90.48.080, 90.48.160, and 90.48.162 (Bureau of National Affairs, 1983 Laws) | State of Washington | |
Rural Utilities Service | 7 CFR 1755.890(i)(5)(v) | ASTM B 694 | 1986 | Standard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 175.33(a)(1)(ii) | ICAO Publication | 2005 | Technical Instructions for the Safe Transport of Dangerous Goods by Air | International Civil Aviation Organization | |
Environmental Protection Agency | 40 CFR 63.14(g)(82) | ASTM D 6722 | 2001 | Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by the Direct Combustion Analysis | ASTM International | |
Food and Drug Administration | 21 CFR 178.3870(f)(5) | ASTM E 28 | 1977 | Standard Test Method for Softening Point by Ring and Ball Apparatus | ASTM International | |
Veterans Affairs Department | 38 CFR 39.63 | NFPA 5000 | 2003 | Building Construction and Safety Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.105 S6.2.1 | SAE J-227a | 1976 | Electric Vehicle Test Procedure | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 3649 | 1998 | Standard Practice for High-Resolution Gamma-Ray Spectrometry of Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D 1552 | 1983 | Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method) | ASTM International | |
National Highway Traffic Safety Administration | 9 CFR 381.409(c)(6) | USDA Handbook 74 | 1973 | Energy Values of Foods: Basis and Derivation | U.S. Department of Agriculture | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(1)(i) | EPA-600-4-79-020 | 1983 | Method 204.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.506(e) | 7 CFR 1755.510 | 2012 | Construction and assembly unit drawings | Rural Utilities Service, U.S. Department of Agriculture | |
Coast Guard | 46 CFR 56.30-30(b) | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(3)(iii)(A) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section XI | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(3) | API 12B | 1958 | Specification for Bolted Production Tanks, Eleventh Edition | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (50) | EPA Method 606 | 1982 | Phthalate Esters by GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (14) Lead | ASTM D 3559D | 1996 | Standard Test Methods for Lead in Water, Atomic Absorption, Graphite Furnace | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 11.2.2.1 | ASTM D 2369 | 1995 | Standard Test Method of Volatile Content for Coatings | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-394a | 1974 | Minimum Performance Criteria for Rollover Protective Structures for Wheeled Front-End Loaders and Wheeled Dozers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(B)(3) | CGA C-2 | 2014 | Recommendations for the Disposition of Unserviceable Compressed Gas Cylinders | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1926.959(a)(1) | ASTM B 117 | 1964 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5360-6 | 1976 | Airport Terminal Building Development with Federal Participation | Federal Aviation Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1.2 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Coast Guard | 46 CFR 108.101(b) | ASTM F 1121 | 1993 | Standard Specification for International Shore Connections for Marine Fire Applications | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(3)(viii) | ANSI Z12.12 | 1968 | Standard for the Prevention of Sulfur Fires and Explosions | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 1664 A | 2015 | n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT–HEM; Non-polar Material) by Extraction and Gravimetry | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.25(c) | FMVSS 108 | 1998 | Lamps, Reflective Devices, and Associated Equipment | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 52.01-120(d)(2) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (44) | EPA Method 365.1 | 1993 | Determination of Phosphorus by Semi-automated Colorimetry, Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(BB) | EPA Ind-01. Method EV-024 | 1993 | Analytical Procedures for Determining Total Tin and Triorganotin in Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (3) | EPA Method 218.3 | 1978 | Chromium (Atomic Absorption, Chelation-Extraction) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(g)(11) | SAE J-1939-13 | 2004 | Off-Board Diagnostic Connector | Society of Automotive Engineers | |
Research and Special Programs Administration | 49 CFR 178.55(k)(3)(i) | ASTM E 8 | 1999 | Standard Test Methods for Tension Testing of Metallic Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 62.14452(m) | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Coast Guard | 27 CFR 21.69(a) | National Formulary | 1980 | Formula No. 39 | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 160.049-3(b) | 46 CFR 164.015 | 2012 | Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shapes | U.S. Coast Guard | |
Energy Department | 10 CFR 430 Subpart B, App. P, 4.1 | ANSI Z21.56 | 1994 | Gas-Fired Pool Heaters | American National Standards Institute | |
Coast Guard | 46 CFR 160.151-15(e) | Federal Standard 595C | 2008 | Colors Used in Government Procurement | General Services Administration | |
Environmental Protection Agency | 40 CFR 1043.60 | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 147.850(a)(3) | KSUIC regulations | 1980 | Kansas Statutes Annotated §§ 65-161, 65-164 through 65-166a, 65-171d (1980 and Cumm. Supp. 1989) | State of Kansas | |
Environmental Protection Agency | 40 CFR 63.457(k)(1) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 39.2009(a)(2)(ix) | IEC 60309-1 | 2012 | Plugs, Socket-Outlets and Couplers for Industrial Purposes—Part 1: General Requirements, Edition 4.2 2012-06 | International Electrotechnical Commission | |
Food and Drug Administration | 21 CFR 184.1472(a)(2)(iii) | AOCS Method Cd 3-25 | 1989 | Saponification Value | American Oil Chemists Society | |
Environmental Protection Agency | 40 CFR 435.11(i) | ASTM D 975 | 1991 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1632.5(b)(2)(i) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Coast Guard | 46 CFR 160.047-1(b) | Drawing No. 160.047-1, Sheet 2, Rev. 2 | 2012 | Buoyant Vest, Kapok or Fibrous Glass, Adult and Child—Cutting Pattern and General Arrangement, Models CKM-1 and CFM-1 | U.S. Coast Guard | |
Rural Utilities Service | 7 CFR 1755.901(e)(1) | TIA/EIA 455-3A, FOTP-3 | 1989 | Procedure to Measure Temperature Cycling on Optical Fibers, Optical Cable, and Other Passive Fiber Optic Components | Electronic Industries Association and/or Telecommunications Industry Association |