This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Food and Drug Administration | 21 CFR 131.127(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 160.170-5(c)(1) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (8) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(x) | ASTM D 859 | 2005 | Test Methods for Silica in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(h)(2) | ASTM E 324 | 1999 | Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1917.119(c) | ANSI A14.1 | 1990 | Safety Requirements for Portable Wood Ladders | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.140(a)(1)(iv) | Drawing No. 210-3000 | 2001 | Upper/Lower Torso Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Heptachlor) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272.2 | 40 CFR 272.2 | 2014 | State Statutes and Regulations for Approved State Hazardous Waste Management Programs | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 75.6(a)(13) | ASTM D 1826 | 1998 | Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Food and Drug Administration | 21 CFR 177.1050(d) | FDA Publication | 1987 | Infrared Spectrophotometric Determination of Polymers Extracted from Borex 210 Resin Pellets | Food and Drug Administration, U.S. Department of Health and Human Services | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(26) | ASTM D 3828 | 2007 | Standard Test Methods for Flash Point by Small Scale Closed Cup Tester | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C 844 | 1985 | Application of Gypsum Base to Receive Gypsum Veneer Plaster | ASTM International | |
Coast Guard | 46 CFR 129.320(e) | NFPA 70 | 1987 | National Electrical Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 47 CFR 15.38(b)(1) | SCTE 28 (formerly DVS 295) | 2003 | Host-POD Interface Standard | Society of Cable Telecommunications Engineers | |
Energy Department | 10 CFR 440 Appendix A | ASTM E 84 | 1989 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Minerals Management Service | 30 CFR 250.1202(a)(3)(iv) | API MPMS | 2013 | Chapter 11, Section 1 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 87.60(a) | ICAO Annex 16 | 2008 | Environmental Protection, Volume II—Aircraft Engine Emissions, Third Edition | International Civil Aviation Organization | |
Research and Special Programs Administration | 49 CFR 179.400-6(b) | AAR Specification M-1002 | 1992 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Coast Guard | 46 CFR 111.12-7(b) | IEC 92-202 | 1996 | Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 63.14(l)(7) | EPA SW-846-8015C | 2007 | Nonhalogenated Organics by Gas Chromatography, Revision 3 | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(22) | AWS D3.6M | 1999 | Specification for Underwater Welding | American Welding Society | |
Coast Guard | 46 CFR 160.005-4(h) | Federal Standard 751 | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Rural Utilities Service | 7 CFR 1755.910(g)(2)(v) | ASTM D 4568 | 1986 | Standard Test Method for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Cable Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(48) | ASTM D 1072 | 1990 | Standard Test Method for Total Sulfur in Fuel Gases | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(4) | CGA G-7.1 | 1966 | Commodity Specification | Compressed Gas Association | |
Food and Drug Administration | 21 CFR 184.1763(b) | Food Chemicals Codex | 1981 | Sodium Hydroxide | National Academy Press | |
Federal Railroad Administration | 49 CFR 229 Appendix H I | ANSI S1.43 | 2002 | Specifications for Integrating-Averaging Sound Level Meters | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (15) | ASTM D 5812 | 2002 | Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 141.852(c)(1)(ii)(A) | APHA Method 9221 | 2005 | Multiple-Tube Fermentation Technique for Members of the Coliform Group, B.1, B.2, Standard Total Coliform Fermentation Technique | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(a) | ASTM D 6883 | 2004 | Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1237.2 | ASTM F2640 | 2018 | Standard Consumer Safety Specification for Booster Seats | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.946(a)(2) | ASTM C 1186 | 1991 | Standard Specification for Flat Non-Asbestos Fiber Cement Sheets | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (11) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Chlordane) | EPA Method 508 | 1995 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.56c(b)(13) | ASTM D 6784 | 2008 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 63.606(c)(3)(ii)(C) | AFPC Book of Methods | 1991 | Section IX, Methods of Analysis for Phosphate Rock, No. 3 Phosphorus-P2O5 or Ca3(PO4)2, Method B—Gravimetric Quimociac Method | Association of Florida Phosphate Chemists | |
Federal Communications Commission | 47 CFR 15.31(a)(2) | ANSI C63.17 | 1998 | Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.133(b)(1)(iii) | ANSI Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 587.15(d) | SAE J-211 | 1995 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.390(q)(2) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Agricultural Marketing Service | 7 CFR 51.2950(a) | USDA Walnut Color Chart | 1997 | Walnut Color Chart: (Shelled Walnuts), (Walnuts in the Shell) | U.S. Department of Agriculture | |
Energy Department | 10 CFR 434.701.1 RS-9 | LTH Report TVAHB-3007 | 1981 | Thermal Bridges in Sheet Metal Construction (RS-9) | Lund Institute of Technology | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.75(h)(4)(iv) | ISO 1496-3 | 1995 | Series 1 Freight Containers--Specification and Testing--Part 3, Tank containers for Liquids, Gases and Pressurized Dry Bulk | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (1) | APHA Method 6440 B | 2000 | Polynuclear Aromatic Hydrocarbons by Micro Liquid-Liquid Extraction Chromatographic Method | American Public Health Association | |
Coast Guard | 40 CFR 60.251(c) Bituminous coal | ASTM D 388 | 1998 | Standard Classification of Coals by Rank | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I)(2)(ii) | EPA-600-R-98-118 | 1997 | Method 300.1--Determination of Inorganic Anions in Drinking Water by Ion Chromatography | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 28.40(b) | ABYC E-9 | 1981 | Direct Current (DC) Electrical Systems on Boats | American Boat and Yacht Council | |
Coast Guard | 46 CFR 164.120-5(d)(7) | ISO 1183-1:2004(E) | 2004 | Plastics—Methods for determining the density of non-cellular plastics—Part 1: Immersion method, liquid pyknometer method and titration method, First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (25) | APHA Method 4110 B | 2000 | Anions by Ion Chromatography with Chemical Suppression of Eluent | American Public Health Association |