This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 60.17(g)(113) | ASTM D 2908 | 1991 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
Research and Special Programs Administration | 42 CFR 460.72(b)(5)(iv) | NFPA 101 | 2000 | Life Safety Code, as amended by NFPA Temporary Interim Amendment 00-1(101) | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(99) | ASTM D 2504 | 1993 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.208 S13.1 | SAE J-211/1 | 1980 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1001(h) | SAE J-320a | 1969 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
Interior Department | 43 CFR 11.44(b) | DOI NRDAM/CME | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Coastal and Marine Environments, Technical Documentation | U.S. Department of the Interior | |
Research and Special Programs Administration | 49 CFR 172.519(f) | ICAO Publication | 1993 | Technical Instructions for the Safe Transport of Dangerous Goods by Air | International Civil Aviation Organization | |
Coast Guard | 46 CFR 96.07-5(b)(1) | ABS Publication | 2013 | All ABS Standards | American Bureau of Shipping | |
Food and Drug Administration | 21 CFR 178.3770(a)(1) | ASTM D 566 | 1982 | Standard Test Method for Dropping Point of Lubricating Grease | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.105 S6.9.2(b) | ASTM E 1136 | 2003 | Standard Specification for Radial Standard Reference Test Tire | ASTM International | |
Coast Guard | 46 CFR 56.50-57(a)(1)(i) | IMO/IMCO Resolution A.265(VIII) | 1973 | Regulations on Subdivision and Stability of Passenger Ships as Equivalent to part B of chapter II of the International Convention for the Safety of Life at Sea, 1960. | International Maritime Organization, Inter-governmental Maritime Consultative Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (53) | APHA Method 2540 B | 1997 | Solids, Total Solids Dried at 103-105 degrees C | American Public Health Association | |
Consumer Product Safety Commission | 16 CFR 1505.5(e)(5) | NFPA 70 | 1978 | National Electrical Code | National Fire Protection Association | |
Rural Utilities Service | 7 CFR 1755.902(u)(2) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
Coast Guard | 46 CFR 160.151-27(c)(2) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1066.1010(b)(3) | SAE J-1711 | 2010 | Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID | APHA Standard Methods, 18th Edition | 1992 | Standard Methods for the Examination of Water and Wastewater, 18th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 455.50 | EPA-821-R-93-010A | 1993 | Methods For The Determination of Nonconventional Pesticides In Municipal and Industrial Wastewater, Volume I | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.114(b)(2)(iii) | ASTM C 25 | 2006 | Standard Test Method for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(viii) | APHA Method 2120 | 2001 | Color | American Public Health Association | |
Food and Drug Administration | 21 CFR 573.640(b)(4)(i) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 56.60-15(b)(2) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (2-(2,4-Dichlorophenoxy) propionic acid) | EPA Method 615 | 1993 | The Determination of Chlorinated Herbicides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 233.70(a)(3) | MIOD regulations | 1983 | The Goemaere-Anderson Wetland Protection Act, MCL 281.701 et seq., reprinted in Michigan 1983 Natural Resources Law | State of Michigan | |
Environmental Protection Agency | 40 CFR 63.1282(d)(3)(iii) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(v)(1)(i) | 35 I.A.C. 215, Subpart B | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.870(a)(6) | ASTM D 1248 | 1989 | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 0040 | 1996 | Sampling of Principal Organic Hazardous Constituents from Combustion Sources Using Tedlar® Bags | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM D 3311 | 1992 | Drain, Waste, and Vent (DWV) Plastic Fittings Patterns | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.101(a) | Drawing No. 92041-009 | 1992 | Six-Axis Load Cell Simulator Assembly | Reprographic Technologies | |
Coast Guard | 46 CFR 56.01-2(k)(15) | MSS SP-83 | 1995 | Class 3000 Steel Pipe Unions, Socket Welding and Threaded | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 25.45-2(b)(2) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(27) | API MPMS | 2005 | Chapter 9, Section 1 | American Petroleum Institute | |
Coast Guard | 46 CFR 129.370(c) | NFPA 70 | 1987 | National Electrical Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.123(b) | Drawing No. 127-1000 | 1987 | Head Assembly | Reprographic Technologies | |
Food and Drug Administration | 21 CFR 184.1431(b) | Food Chemicals Codex | 1981 | Magnesium Oxide | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1259(b)(8) | FOC Publication | 2012 | Modification of Japan Institute of Oils and Fats: Analysis Method of Residual Ethyl Esters of Fatty Acids | Fuji Oil Company, Limited | |
Federal Highway Administration | 23 CFR 630.1002 Footnote 1 | DOT Publication | 2009 | Manual on Uniform Traffic Control Devices (MUTCD), Part 6 | Federal Highway Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (110) | APHA Method 6200 B | 1997 | Volatile Organic Compounds by Purge and Trap GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.131(d)(3) | APHA Method 5310 B | 2014 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(g)(84) | ASTM D 6784 | 2008 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Food and Drug Administration | 21 CFR 177.2460(c)(1) | ASTM D 1243 | 1979 | Standard Methods of Test for Dilute Solution Viscosity of Vinyl Chloride Polymers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(22) | ASTM D 1078 | 2005 | Standard Test Method for Distillation Range of Volatile Organic Liquids | ASTM International | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 104, 7.1 | ASTM D 1193 | 1977 | Standard Specification for Reagent Water | ASTM International | |
Coast Guard | 34 CFR 75.616(c) | ASHRAE 90A | 1980 | Energy Conservation in New Building Design | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (70) | USGS I-4471-97 | 1997 | Metals by Inductively Coupled Plasma | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA-821-B-94-005 | 1994 | Tetra-through-Octa-Chlorinated Dioxins and Furans by Isotope Dilution HRGC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41da Bituminous coal | ASTM D 388 | 1998 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 63.1510(f)(4) | ASTM D7520-13 | 2013 | Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere | ASTM International | |
Research and Special Programs Administration | 49 CFR 195.428(c) | API 2510 | 2001 | Design and Construction of LPG Installations | American Petroleum Institute |