Environmental Protection Agency |
|
40 CFR 61.18(a)(10) |
ASTM D2986 |
1978 |
Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1926.1440(c) |
ASME B30.14 |
2004 |
Side Boom Tractors
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (82) |
APHA Method 6410 B |
2000 |
Base/Neutral and Acid Extractable Compounds by GC/MS
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 141.74(a)(2) Table (Free Chlorine) |
APHA Method 4500-Cl H |
2000 |
Chlorine, Syringaldazine (FACTS)
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 60.251(q) Subbituminous coal |
ASTM D388 |
1998 |
Standard Classification of Coals by Rank
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60.105a(b)(2)(ii) |
ANSI/ASME PTC 19.10-1981 |
1981 |
Flue and Exhaust Gas Analyses
|
American Society of Mechanical Engineers |
Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
UN Publication |
2005 |
UN Recommendations on the Transport of Dangerous Goods
|
United Nations |
National Archives and Records Administration |
|
36 CFR 1234, Appendix B, 2.m |
NFPA 10 |
1994 |
Standard for Portable Fire Extinguishers
|
National Fire Protection Association |
Environmental Protection Agency |
|
40 CFR 52.741(w)(1)(i) |
35 I.A.C. 215, Subpart Y |
1989 |
Administrative Code
|
State of Illinois |
Minerals Management Service |
|
30 CFR 250.1628(d)(3) |
API RP 14E |
2000 |
Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems
|
American Petroleum Institute |
Environmental Protection Agency |
|
40 CFR 60.261(w) Ferrosilicon |
ASTM A100 |
1969 |
Standard Specification for Ferrosilicon
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 59.412(b)(3) |
ASTM D1640 |
1983 |
Standard Test Method for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
|
ASTM International |
Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ASTM D1835 |
1997 |
Standard Specification for Liquefied Petroleum (LP) Gases
|
ASTM International |
Rural Utilities Service |
|
7 CFR 1755.903(t)(1) |
ASTM D4566 |
1998 |
Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
|
International Telecommunication Union--Telecommunication |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (28) |
ASTM D1293B |
1999 |
Standard Test Methods for pH of Water, Routine or Continuous Measurement
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 86.1808-01(f)(12)(iv) |
SAE J-2534 |
2002 |
Recommended Practice for Pass-Thru Vehicle Programming
|
Society of Automotive Engineers |
Energy Department |
|
10 CFR 430 Subpart B, App. M, 1.11 |
AMCA 210 |
1999 |
Laboratory Methods of Testing Fans for Ratings
|
Air Movement and Control Association |
Coast Guard |
|
46 CFR 54.10-10(e) |
ASME B&PV Code |
1998 |
Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda)
|
American Society of Mechanical Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (60) |
APHA Method 3125 B |
2009 |
Inductively Coupled Plasma/Mass Spectrometric Method
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (22) Selenium |
APHA Method 3114 B |
1995 |
Arsenic and Selenium Digestion
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 799.5085(h)(2) |
ASTM E729 |
1996 |
Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 244(b)(4)(vi) |
ASTM D5291 |
2007 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
|
ASTM International |
Food and Drug Administration |
|
21 CFR 177.1350(b)(2) |
ASTM D1238 |
1982 |
Standard Method of Measuring Flow Rates of Thermoplastics by Extrusion Plastometer
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1926.350(j) |
ANSI Z49.1 |
1967 |
Safety in Welding and Cutting
|
American Welding Society |
Rural Utilities Service |
|
7 CFR 1728.202(b)(10)(i) |
ANSI O5.2 |
2006 |
Standard for Wood Products, Structural Glued Laminated Timber for Utility Structures
|
American National Standards Institute |
Coast Guard |
|
46 CFR 160.151-15(o) |
IMO LSA Code |
2010 |
Life Saving Appliances, including LSA Code
|
International Maritime Organization |
Environmental Protection Agency |
|
40 CFR 1066.425(j)(1)(iii) |
SAE J-2951 |
2014 |
Drive Quality Evaluation for Chassis Dynamometer Testing
|
Society of Automotive Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(b)(10)(xxxiii) |
APHA Method 3500-Zn |
1997 |
Zinc
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 265.190(a) |
EPA SW-846 |
1996 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 63.1450(a)(1)(v) |
ASTM D4536 |
1996 |
Standard Test Method for High-Volume Sampling for Solid Particulate Matter and Determination of Particulate Emissions
|
American Society for Microbiology |
Food and Drug Administration |
|
21 CFR 177.1380(a)(4) |
ASTM D3275 |
1989 |
Standard Specification for E-CTFE-Flouroplastic Molding Extrusion and Coating Materials
|
ASTM International |
National Highway Traffic Safety Administration |
|
49 CFR 572.76(a) |
Drawing No. SA 106C 072 |
1997 |
Leg Assembly, Left, Revision B
|
Reprographic Technologies |
Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart L Appendix B 1910.163 |
ANSI/NFPA 18 |
2014 |
Wetting Agents
|
National Fire Protection Association |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (22) |
ASTM D1688A |
2007 |
Standard Test Methods for Copper in Water, Atomic Absorption, Direct
|
ASTM International |
Coast Guard |
|
46 CFR 133.70(a)(2)(iii) |
IMO Resolution A.760(18) |
1993 |
Symbols Related to Life-Saving Appliances and Arrangements
|
International Maritime Organization |
Housing and Urban Development Department |
|
24 CFR 3280.403(d)(2) |
ASTM E773 |
1997 |
Standard Test Method for Seal Durability of Sealed Insulating Glass Units
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 63.14(n)(5) |
NCASI Method ISS/FP-A105.01 |
2005 |
Impinger Source Sampling Method for Selected Aldehydes, Ketones, and Polar Compounds
|
National Council of the Paper Industry for Air and Stream Improvement, Inc. |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.1002(b)(4) |
API 17J |
2008 |
Specification for Unbonded Flexible Pipe
|
American Petroleum Institute |
National Highway Traffic Safety Administration |
|
49 CFR 571.108 S14.2.1.6.2 |
SAE J-567b |
1964 |
Bulb Sockets
|
Society of Automotive Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(b)(23)(i) |
QuikChem Method 10-204-00-1-X |
2005 |
Digestion and Distillation of Total Cyanide in Drinking and Wastewaters using MICRO DIST and Determination of Cyanide by Flow Injection Analysis
|
Lachat Instruments |
Food and Drug Administration |
|
21 CFR 184.1339(b) |
Food Chemicals Codex |
1981 |
Guar Gum
|
National Academy Press |
Coast Guard |
|
46 CFR 122.604(h) |
IMO Resolution A.658(16) |
1989 |
Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances
|
International Maritime Organization |
National Highway Traffic Safety Administration |
|
49 CFR 572.125(a) |
Drawing No. 127-8210 |
1994 |
Abdominal insert
|
Reprographic Technologies |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Bromacil; Bromacil Salts and Esters) |
EPA Method 525.1 |
1988 |
Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 63.7575 Biodiesel |
ASTM D6751 |
2011 |
Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 179.100-7(b) |
ASTM B209 |
1993 |
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1917.3(b)(3) |
ANSI A14.5 |
1992 |
Safety Requirements for Portable Reinforced Plastic Ladders
|
American National Standards Institute |
Federal Aviation Administration |
|
14 CFR 91.225(h)(1) |
FAA TSO-C154c |
2009 |
Universal Access Transceiver (UAT) Automatic Dependent Surveillance-Broadcast (ADS-B) Equipment Operating on the Frequency of 978 MHz
|
Federal Aviation Administration, U.S. Department of Transportation |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID Footnote 4 |
EPA Method 624 |
1982 |
Volatile Organic Compounds by Purge and Trap GC/MS
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.402(c)(2) Table Note 7 |
APHA Method 9221 D |
1999 |
Presence-Absence (P-A) Coliform Test
|
American Public Health Association |