This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 86.1(b)(11) | ASTM D2622 | 2010 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.926d(d)(3) | HUD Handbook 4910.1 | 1994 | Minimum Property Standards for Housing | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 10.2 | EPA Method 6020 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(g)(2) | ASTM A99 | 1987 | Standard Specification for Ferromanganese | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 393.55(c)(2) | FMVSS 121 | 1998 | Air Brake Systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Housing and Urban Development Department | 24 CFR 200.946(a)(2) | ASTM D579 | 1990 | Standard Specification for Greige Woven Glass Fabrics | ASTM International | |
Coast Guard | 46 CFR 154.610(c) | ASTM A20/A 20M | 1997 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | ASTM International | |
Research and Special Programs Administration | 21 CFR 177.1500(d)(5)(ii) | ISO 307 | 1984 | Plastics--Polyamides--Determination of Viscosity Number | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Dichlorvos) | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(20) | ASTM D2234/D 2234M | 2010 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. T, 3a | ASME A112.19.6 | 1995 | Hydraulic Requirements for Water Closets and Urinals | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 164.120-5(b)(7) | ASTM D1045 | 2008 | Standard Test Methods of Sampling and Testing Plasticizers used in Plastics | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.113(a)(2) | Drawing No. 78051-64 | 1987 | Torque jam nut | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Mevinphos) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 233.70(a)(4) | MIOD regulations | 1983 | The Inland Lakes and Stream Act, MCL 281.951 et seq., reprinted in Michigan 1983 Natural Resources Law | State of Michigan | |
Environmental Protection Agency | 40 CFR 90.7(b)(1) Table | ASTM D1319 | 1989 | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0012 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 870.20 Table 2 | ASTM D2234 | 1989 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (107) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(c)(1) Table (Amperometric Titration) | ASTM D1253 | 1996 | Standard Test Method for Residual Chlorine in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(j)(3) | CAARB Vapor Recovery Test Procedure TP-201.1E | 2003 | Leak Rate and Cracking Pressure of Pressure/Vacuum Vent Valves | California Air Resources Board | |
Mine Safety and Health Administration | 30 CFR 71.402(b) | ANSI A40.8 | 1955 | National Plumbing Code | American National Standards Institute | |
Coast Guard | 46 CFR 12.02-7(f) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Food and Drug Administration | 21 CFR 178.3870(f)(1) | ASTM D509 | 1981 | Standard Test Methods of Sampling and Grading Rosin | ASTM International | |
Environmental Protection Agency | 40 CFR 60.41da Lignite | ASTM D388 | 1990 | Standard Classification of Coals by Rank | ASTM International | |
Energy Department | 10 CFR 430.2, Definitions, ER incandescent reflector lamp (1) | ANSI C79.1 | 1994 | Nomenclature for Glass Bulbs Intended for Use with Electric Lamps | American National Standards Institute | |
Federal Railroad Administration | 49 CFR 238 Appendix B (b) Special Optical Area | ASTM E662 | 2001 | Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials | ASTM International | |
Food and Drug Administration | 21 CFR 175.300(b)(3)(xix) | FDA Publication | 2004 | Method for Determination of Intrinsic Viscosity of Maleic Anhydride Adduct of Crystalline Polypropylene | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 160.077-11(c)(1)(ii) | UL 1191 | 2013 | Standard for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Consumer Product Safety Commission | 16 CFR 1211.2(c) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Rural Utilities Service | 7 CFR 1755.522(i)(2)(viii) | Bellcore SR-TSV-002275 | 1990 | BOC Notes on the LEC Networks-1990, Issue 1 | Bell Communications Research | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (12) | AOAC Method 993.14 | 1998 | Cadmium-Total, mg/L | AOAC International | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5210-10 | 1967 | Airport Fire and Rescue Equipment Building Guide | Federal Aviation Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.10(b)(6) | AAPM Report No. 116 | 2009 | An Exposure Indicator for Digital Radiography, Report of AAPM Task Group 116 | American Association of Physicists in Medicine | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 32 | USGS Publication | 1975 | Water Temperature-Influential Factors, Field Measurement and Data Presentation, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 1, Chapter D1 | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA Method 508 | 1995 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
Labor Department | 41 CFR 50-204.2(a)(1) | 29 CFR 1504 | 2014 | Safety and Health Regulations for Longshoring | Occupational Safety and Health Administration, U.S. Department of Labor | |
Research and Special Programs Administration | 49 CFR 178.337-1(a)(2) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (8) | ASTM D5673 | 2005 | Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xx) | ASTM D1293 | 2000 | Standard Test Methods for pH of Water | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(j) Table 3, C1 | ASTM E1218 | 2004 | Standard Guide for Conducting Static Toxicity Tests with Microalgae | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | ASCE 7 | 1988 | Minimum Design Loads for Buildings and Other Structures | American Society of Civil Engineers | |
Environmental Protection Agency | 40 CFR 147.2550(a)(1) | WYUIC regulations | 1977 | Wyoming Environmental Quality Act, Wyoming Statutes sections 35-11-101 through 35-11-115, and 35-11-301 through 35-11-305 (1977 Republished Edition and 1989 Cumm. Supp.) | State of Wyoming | |
Occupational Safety and Health Administration | 29 CFR 1926.302(e)(12) | ANSI A10.3 | 1970 | Safety Requirements for Explosive-Actuated Fastening Tools | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 98.123(c)(1)(i)(A) | EPA Publication | 2007 | Emissions Inventory Improvement Program, Volume II: Chapter 16, Methods for Estimating Air Emissions from Chemical Manufacturing Facilities, Final | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272.501(b)(1)(ii) | FLHWMP | 1997 | EPA Approved Florida's Regulatory Requirements Applicable to the Hazardous Waste Management Program | State of Florida | |
Environmental Protection Agency | 40 CFR 63.694(j)(2)(i) | EPA SW-846 | 2014 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.485(g)(5) | ASTM D2504 | 1988 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Food and Drug Administration | 21 CFR 177.1990(c)(3) | FDA Publication | 1996 | Determination of Residual Vinylidene Chloride and Methyl Acrylate in Vinylidene Chloride/Methyl Acrylate Copolymer Resins and Films | Food and Drug Administration, U.S. Department of Health and Human Services | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S14.2.1.6 | SAE J-573d | 1968 | Lamp Bulbs and Sealed Units | Society of Automotive Engineers |