This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.176-4(b) | ASTM D 1434 | 1988 | Standard Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.205 S5.4 | ANSI/SAE Z26.1 | 1996 | Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(i) | SAE J-320b | 1972 | Minimum Performance Criteria for Rollover Protective Structures for Prime Movers | Society of Automotive Engineers | |
Coast Guard | 46 CFR 111.70-3(a) | NEMA Standards Publication ICS 2 | 2000 | Industrial Control and Systems Controllers, Contactors, and Overload Relays, Rated 600 Volts | National Electrical Manufacturers Association | |
Research and Special Programs Administration | 49 CFR 195.205(b)(1) | API 653 | 2003 | Tank Inspection, Repair, Alteration, and Reconstruction | American Petroleum Institute | |
Food and Drug Administration | 21 CFR 177.2210(b)(3) | FDA Publication | 1993 | Hypalon Synthetic Rubber--Determination of Sulfur by Parr Bomb | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 92.508(b) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Coast Guard | 46 CFR 164.023-7(a)(1) | Federal Standard 191A | 1978 | Method 4100, Strength and Elongation, Breaking; and Tenacity; of Thread and Yarn; Single Strand | Federal Specifications Standards and Test Methods | |
Research and Special Programs Administration | 45 CFR 162.1203(a)(6) | CAQH Publication | 2011 | Phase I CORE 157: Eligibility and Benefits System Availability Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Coast Guard | 46 CFR 116.300(b)(1)(ii) | ABS Publication | 1975 | Rules for Building and Classing Steel Vessels Under 61 Meters (200 feet) in Length | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 591 | 1985 | Rigid Preformed Polyurethane Insulation Board | ASTM International | |
Coast Guard | 46 CFR 114.600(b) | ANSI B31.1 | 1986 | Code for Pressure Piping, Power Piping | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.35(c)(2)(i) | Drawing No. 86-5001-001 | 1996 | Leg Assembly, Complete | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (68) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(1) | EPA-600-R-94-173 | 1994 | Technical Notes on Drinking Water Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.3.2 | APHA Method 602 | 2015 | Tentative Method of the Analysis for Gross Beta Radioactivity Content of the Atmosphere | American Public Health Association | |
Food and Drug Administration | 21 CFR 189.110(c) | AOAC Journal | 1973 | Flavors and Nonalcoholic Beverages, Vol. 56, No. 5, pages 1281-1283 | AOAC International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 193.2013(a)(1) | AGA Publication | 2001 | Purging Principles and Practices | American Gas Association | |
Labor Department | 41 CFR 50-204.75 | 49 CFR 171 | 2014 | Hazardous Materials Regulations, General Information, Regulations, and Definitions | U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (76) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (19) Nitrite | APHA Method 4500-NO3 F | 2000 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(82) | ASTM D 2015 | 1996 | Standard Test Method for Gross Calorific Value of Solid Fuel by the Adiabatic Bomb Calorimeter | ASTM International | |
Food and Drug Administration | 21 CFR 177.1020(b) | FDA Publication | 1985 | Analysis of Cycopaco Resin for Residual b-(2-Hydroxyethyl mercapto) propionitrile | Food and Drug Administration, U.S. Department of Health and Human Services | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-S-1657 | 1970 | Sealing Compound, Single Component Butyl Rubber Base, Solvent Release Type (for Buildings and Other Types of Construction) | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(d)(3) | ANSI/NFPA 14 | 2014 | Standard for the Installation of Standpipe and Hose Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 272.2201(b)(1)(i) | TXHWMP | 2012 | EPA-Approved Texas Statutory and Regulatory Requirements Applicable to the Hazardous Waste Management Program | State of Texas | |
Rural Utilities Service | 7 CFR 1755.890(b)(2) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.22(a)(2)(iii) | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
National Highway Traffic Safety Administration | 49 CFR 572.130(a)(1) | RT Publication | 2000 | Parts List and Drawings, Part 572 Subpart O Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy (HIII-5F, Alpha Version) | Reprographic Technologies | |
Coast Guard | 46 CFR 183.410(d) | UL 1572 | 1995 | High Intensity Discharge Lighting Fixtures | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 571.208 S6.6(a)(1) | SAE J-211/1 | 1980 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 9095B | 2004 | Paint Filter Liquids Test | U.S. Environmental Protection Agency | |
Federal Railroad Administration | 49 CFR 238 Appendix B (b) Specific Extinction Area | ASTM E 1354 | 1999 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter | ASTM International | |
Coast Guard | 46 CFR 56.50-15(b) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (52) | APHA Method 3500-K B | 1997 | Potassium, Flame Photometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 445.20 | 40 CFR Part 258 | 2015 | Criteria for Municipal Solid Waste Landfills | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.364(e)(6) | ASME MFC-18M | 2001 | Measurement of Fluid Flow Using Variable Area Meters | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 172.215(b)(1) | ASTM E 28 | 1982 | Standard Test Method for Softening Point by Ring and Ball Apparatus | ASTM International | |
Energy Department | 10 CFR 430.3(c)(15) | ANSI C82.11 | 2002 | American National Standard for Lamp Ballasts—High-frequency Fluorescent Lamp Ballasts—Supplements | American National Standards Institute | |
Coast Guard | 46 CFR 160.151-27(c)(5) | IMO Resolution A.689(17) | 1996 | Recommendation on Testing Life-Saving Appliances including amendments through Resolution MSC.54(66) | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.750(a)(2)(i) | SAE J-1151 | 2011 | Methane Measurement Using Gas Chromatography | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 27 | APHA Standard Methods, 14th Edition | 1975 | Standard Methods for the Examination of Water and Wastewater. 14th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 211.203(c) | ANSI Z24.22 | 1957 | Method of Measurement of Real-Ear Attenuation of Ear Protectors at Threshold | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63.1282(a)(2)(i) | GRI-95/0368.1 | 1996 | Atmospheric Rich/Lean Method for Determining Glycol Dehydrator Emissions | Gas Research Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(1)(i) | ANSI Z12.12 | 1968 | Standard for the Prevention of Sulfur Fires and Explosions | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (2-Methyl-4-chlorophenoxyacetic acid) | EPA Method 555 | 1992 | Chlorinated Acids by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 1065.701 Table 1 | ASTM D 6985 | 2004 | Standard Specification for Middle Distillate Fuel Oil--Military Marine Applications | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.703 | UL 181A | 1994 | Standard for Safety Closure Systems for use with Rigid Air Ducts and Air Connectors with 1998 revisions | Underwriters Laboratories, Inc. | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.51(b)(1) 249 | National Formulary | 1980 | Formula No. 25-A | U.S. Pharmacopeial Convention |