This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Mine Safety and Health Administration | 30 CFR 77.403(b) | CA State Regulations | 1972 | Division of Industrial Safety, General Safety Orders, Register 72, Number 6, Article 25, Section 3655—Overhead Guards for High-Lift Rider Trucks | State of California, Administrative Code | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ACI 211.2 | 1991 | Standard Practice for Selecting Proportions for Structural Lightweight Concrete | American Concrete Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 180.405(g)(2)(i) | TTMA RP No. 61 | 1998 | Performance of Manhole and/or Fill Opening Assemblies | Truck Trailer Manufacturers Association | |
Coast Guard | 46 CFR 160.041-4(a) | NIST R-178 | 1941 | Packaging of First-Aid Unit Dressings and Treatments | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.22 | 2001 | Wrought Copper and Copper Alloy Solder Joint Pressure Fittings | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (60) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Food Safety and Inspection Service | 21 CFR 173.340(a)(4) | Union Carbide Publication | 1995 | Viscosity Determination of n-butoxypoly (oxyethylene) poly (oxypropylene) glycol | Union Carbide Corporation | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 855 | 2009 | Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 65 | 1973 | Controlled Density Cellular Concrete Floor Fill | U.S. Department of Housing and Urban Development | |
Food and Drug Administration | 21 CFR 177.1210(b)(5) | ASTM D 1646 | 1981 | Standard Test Method for Rubber--Viscosity and Vulcanization Characteristics (Mooney Viscometer) | ASTM International | |
Environmental Protection Agency | 40 CFR 1051.501(d)(2)(i) | 40 CFR 1051.515(a)(1) | 2012 | Preconditioning fuel soak | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.161 Table A | Drawing No. 167–0000 | 2004 | Complete Assembly | Leet-Melbrook | |
Coast Guard | 46 CFR 58.10-5(b)(3)(i) | UL 1111 | 1988 | Marine Carburetor Flame Arresters | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.156-5(b)(5) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Environmental Protection Agency | 40 CFR 1066.425(j)(1)(iv) | SAE J-2951 | 2014 | Drive Quality Evaluation for Chassis Dynamometer Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(xxviii) | APHA Method 3500-Pb | 1997 | Lead | American Public Health Association | |
Environmental Protection Agency | 40 CFR 763 Appendix E 2.10(17) | NBS Special Publication 506 | 1977 | Selection and Characterization of Fibrous and Nonfibrous Amphiboles for Analytical Methods Development, pp. 295-312, in: Proceedings of Workshop on Asbestos: Definitions and Measurement Methods | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 98.144(b) | ASTM D 6349 | 2009 | Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(154) | ASTM D 4239 | 1997 | Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods | ASTM International | |
Coast Guard | 46 CFR 56.01-2(k)(5) | MSS SP-45 | 2003 | Bypass and Drain Connections | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Energy Department | 10 CFR 440 Appendix A | ASTM E 96 | 1990 | Standard Test Methods for Water Vapor Transmission of Materials | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. M, 3.9.1 | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Atrazine) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 261.1035(b)(4)(iii) | EPA-450-2-81-005 | 1981 | Air Pollution Training Institute Course 415: Control of Gaseous Emissions | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.11960(e)(1)(i) | EPA SW-846-8260B | 1996 | Volatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS), Revision 2 | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.702(e)(7) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(16) | API MPMS | 2005 | Chapter 5, Section 1 | American Petroleum Institute | |
Coast Guard | 46 CFR 148.8(b)(1) | IMSBC Code | 2009 | International Maritime Solid Bulk Cargoes Code and Supplement | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.126(b) | Drawing No. 127-4014 | 1987 | Lower leg | Reprographic Technologies | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 887 | 2012 | Standard Specifications for Personal Climbing Equipment | ASTM International | |
Coast Guard | 24 CFR 200.925c(c)(3) | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 63.14(g)(58) | ASTM D 5066 | 1991 | Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints--Weight Basis | ASTM International | |
Food and Drug Administration | 21 CFR 184.1670(b) | Food Chemicals Codex | 1981 | Propylparaben | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1349(b) | Food Chemicals Codex | 1981 | Karaya Gum (Sterculia Gum) | National Academy Press | |
Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(14) | SAE J-1292 | 1981 | Automobile, Truck, Truck-Tractor, Trailer, and Motor Coach Wiring | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (9) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.402(c)(2) Table | IDEXX Colisure Test | 1994 | Detect coliforms/E. coli with the convenience of a long-read window | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 63.14(l)(15) | EPA SW-846-7740 | 1986 | Selenium (Atomic Absorption, Furnace Technique), Revision 0 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 111.105-15(b) | IEC 79-6 | 1995 | Electrical Apparatus for Explosive Gas Atmospheres | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 60, Appendix B, PS-1, 2.1 | ASTM D 6216 | 1998 | Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (74) | APHA Method 3113 B | 2004 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (1,4-Dichlorobenzene) | EPA Method 502.2 | 1995 | Volatile Organic Compounds (Drinking Water) by GC/PID/ELCD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.45(f)(4)(i) | ASTM D 388 | 1998 | Standard Classification of Coals by Rank | ASTM International | |
Coast Guard | 46 CFR 139.120(d) | ANSI/ISO/ASQ Q9001-2000 | 2000 | Quality management systems—Requirements | American Society for Quality Control | |
Housing and Urban Development Department | 24 CFR 3285.4(f)(2) | AWPA U1 | 2004 | Use Category System; User Specification for Treated Wood | American Wood Preservers Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.94(a)(2)(iii) | NFPA 68 | 1954 | Guide for Explosion Venting | National Fire Protection Association | |
Research and Special Programs Administration | 42 CFR 460.72(b)(5)(iv) | NFPA 101 | 2000 | Life Safety Code, as amended by NFPA Temporary Interim Amendment 00-1(101) | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 61.18(a)(8) | ASTM D 2504 | 1967 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 9 | ASTM B 858M | 1995 | Standard Test Method for Determination of Susceptibility to Stress Corrosion Cracking in Copper Alloys Using Ammonia Vapor Test | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(31) | ASTM A 352/A 352M | 1998 | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts Suitable for Low-Temperature Service | ASTM International |