This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (6) | USGS B-0055-85 | 1989 | Membrane Filtration Quantitative: Fecal Streptococci | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1653 (18.12) | ATI Publication | 1991 | Determination of Chlorophenolics by GCMS, Development of Method 1653 | Analytical Technology, Inc | |
Environmental Protection Agency | 40 CFR 80.177(d)(1)(ii) | ASTM D4814 | 2013 | Standard Specification for Automotive Spark-Ignition Engine Fuel | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1001(h) | SAE J-320a | 1969 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S6.2 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 57.14130(j) | SAE J-386 | 1985 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Housing and Urban Development Department | 24 CFR 3285.4(h)(1) | NFPA 31 | 2001 | Standard for the Installation of Oil-Burning Equipment | National Fire Protection Association | |
National Highway Traffic Safety Administration | 29 CFR 1910.103(c)(1)(v)(B) | ANSI B31.5a | 1968 | Addenda to Refrigeration Piping | American National Standards Institute | |
Coast Guard | 46 CFR 154.1400(a)(8) | ANSI Z87.1 | 1979 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
National Archives and Records Administration | 36 CFR 1234.14(b)(1) | PIMA IT9.11 | 1998 | Imaging Materials--Processed Safety Photographic Film--Storage | Association for Information and Image Management | |
Rural Utilities Service | 7 CFR 1755.890(i)(8) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.214(b)(3)(ii) | AOAC Method 9 | 1970 | Official Methods of Analysis, 11th Edition | AOAC International | |
Housing and Urban Development Department | 24 CFR 200.926b(c) | CABO 1 & 2 Family Code | 1992 | One and Two Family Dwelling Code including the 1993 amendments, Appendices A, B, D, and E, but excluding Chapter I and the phrase “or approved fire retardant wood” contained in the exception of paragraph R-218.2.2(2) | Council of American Building Officials | |
Coast Guard | 46 CFR 160.055-5(b)(3) | Drawing No. 160.055-1A | 2012 | Life Preservers, Unicellular Plastic Foam, Adult | U.S. Coast Guard | |
National Highway Traffic Safety Administration | 49 CFR 572.177(a)(3) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 147.2600(a)(3) | GUUIC regulations | 1982 | Guam Environmental Protection Agency, Underground Injection Control Regulations, Chapters 1-9, as revised by amendments adopted September 24, 1982 | Guam Territory | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUU, Table 4, (8)(a)(i)(2)(a) | ASTM D5790 | 1995 | Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry | ASTM International | |
Minerals Management Service | 30 CFR 250.803(b)(7) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 178.58(m)(5)(i) | ASTM E8 | 1999 | Standard Test Methods for Tension Testing of Metallic Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 63.99(a)(20)(iii) | ME State Regulations | 2015 | Maine Regulations Applicable to Hazardous Air Pollutants | State of Maine | |
Energy Department | 10 CFR 434.701.1 RS-43 | NEMA MG-10 | 1994 | Energy Management Guide for Selection and Use of Polyphase Motors (RS-43) | National Electrical Manufacturers Association | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(2)(ii) | ASME B&PV Code | 1974 | Boiler and Pressure Vessel Code, Section XI, Table IWB-2500 and Table IWB-2600 Category B-J and the addenda through the Summer 1975 Addenda | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(3) | SAE J-211 | 1980 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (40) | ASTM D3086 | 1990 | Test Method for Organochlorine Pesticides in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 304 | 2014 | Radium 226, Radiochemical | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D5453 | 2000 | Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(w)(1) | IME Publication 2 | 1964 | American Table of Distances for Storage of Explosives | Institute of Makers of Explosives | |
Coast Guard | 46 CFR 160.010-1(d)(3) | MIL-P-40619A | 1968 | Plastic Material, Cellular Polystyrene | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (42) | APHA Method 6200 B | 1997 | Volatile Organic Compounds by Purge and Trap GC/MS | American Public Health Association | |
Food and Drug Administration | 21 CFR 109.30(b) | FDA Publication | 1979 | Analytical Methodology for Polychlorinated Biphenyls | Food and Drug Administration, U.S. Department of Health and Human Services | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.160 | ANSI/NFPA 11A | 2014 | High Expansion Foam Extinguishing Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 54.20-1(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.17(o)(1) | TAPPI Method T624 | 2011 | Gross Heating Value of Black Liquor | Technical Association of the Pulp and Paper Industry | |
National Highway Traffic Safety Administration | 49 CFR 572.140(a)(1)(ii) | Drawing No. TE-208-000 | 2001 | Headform | Reprographic Technologies | |
Occupational Safety and Health Administration | 29 CFR 1926.6(l)(1) | ASME B30.2 | 2005 | Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | ASTM D4327 | 2003 | Inorganic Anions by Ion Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) | EPA Method 6010 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 111.105-31(n)(1) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A376/A 376M | 1996 | Seamless Austenitic Steel Pipe for High Temperature Central-Station Service | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(33) | ASTM D5191 | 2013 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) | ASTM International | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.114(a) | ASTM D86 | 1978 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Coast Guard | 46 CFR 171.001(d) | IMO Resolution MSC.216(82) | 2006 | Adoption of Amendments to the International Convention for the Safety of Life At Sea, 1974, As Amended (IMO Res. MSC.216(82) | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (40) | APHA Method 4500-NO3 F | 2000 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(xiv) | APHA Method 2540 | 1997 | Solids | American Public Health Association | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (3) | EPA Method 200.7 | 1994 | Inductively Coupled Plasma Atomic Emission Spectrometric Method for Trace Element Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1806-17(a) | California Regulatory Requirements | 2013 | Title 13, Motor Vehicles, Division 3, Air Resources Board, Chapter 1, Motor Vehicle Pollution Control Devices, Article 2, §1968.2 and Subsequent Model-Year Passenger Cars, Light-Duty Trucks, and Medium-Duty Vehicles and Engines | California Air Resources Board | |
Environmental Protection Agency | 40 CFR 1051.501(d)(3) | ASTM D471 | 1998 | Standard Test Method for Rubber Property--Effect of Liquids | ASTM International | |
Coast Guard | 23 CFR 655.601(d)(1)(ii) | AASHTO Publication | 1993 | Traffic Engineering Metric Conversions Factors, Addendum to the Guide to Metric Conversion | American Association of State Highway and Transportation Officials | |
Environmental Protection Agency | 40 CFR 1037.810(d)(2) | SAE J-1594 | 2010 | Vehicle Aerodynamics Terminology | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(2) | API 650 | 1966 | Welded Steel Tanks for Oil Storage | American Petroleum Institute |