Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
| Incorporated by (Agency) | FR Citation | CFR Citation Sort descending | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Federal Railroad Administration | 49 CFR 232.103(l) | AAR S-469-47 | 1999 | Performance Specification of Freight Brakes | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.305(a) | AAR S–486–04 | 2004 | Tests-Standard Freight Brake Equipment, Section 3.0, Tests-Standard Freight Brake Equipment, and Section 4.0, Special Tests | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.305(a) | AAR S–486–04 | 2004 | Tests-Standard Freight Brake Equipment, Section 3.0, Tests-Standard Freight Brake Equipment, and Section 4.0, Special Tests | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(a) | AAR S-4200 | 2008 | Electronically Controlled Pneumatic (ECP) Cable-Based Brake Systems—Performance Requirements | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(a) | AAR S-4210 | 2007 | ECP Cable-Based Brake System Cable, Connectors, and Junction Boxes—Performance Specifications | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(a) | AAR S-4220 | 2002 | ECP Cable-Based Brake DC Power Supply—Performance Specification, Version 2.0 | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(a) | AAR S-4230 | 2004 | Intratrain Communication (ITC) Specification for Cable-Based Freight Train Control System, Version 3.0 | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(a) | AAR S-4240 | 2007 | ECP Brake Equipment—Approval Procedure | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(a) | AAR S-4250 | 2004 | Performance Requirements for ITC Controlled Cable-Based Distributed Power Systems, Version 2.0 | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(a) | AAR S-4260 | 2007 | ECP Brake and Wire Distributed Power Interoperability Test Procedures | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(a) | AAR S-4270 | 2008 | ECP Brake System Configuration Management | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(a)(1) | AAR S-4200 | 2008 | Electronically Controlled Pneumatic (ECP) Cable-Based Brake Systems—Performance Requirements | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(a)(2) | AAR S-4210 | 2007 | ECP Cable-Based Brake System Cable, Connectors, and Junction Boxes—Performance Specifications | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(a)(3) | AAR S-4220 | 2002 | ECP Cable-Based Brake DC Power Supply—Performance Specification, Version 2.0 | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(a)(4) | AAR S-4230 | 2004 | Intratrain Communication (ITC) Specification for Cable-Based Freight Train Control System, Version 3.0 | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(a)(5) | AAR S-4240 | 2007 | ECP Brake Equipment—Approval Procedure | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(a)(6) | AAR S-4250 | 2004 | Performance Requirements for ITC Controlled Cable-Based Distributed Power Systems, Version 2.0 | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(a)(7) | AAR S-4260 | 2007 | ECP Brake and Wire Distributed Power Interoperability Test Procedures | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(a)(8) | AAR S-4270 | 2008 | ECP Brake System Configuration Management | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(b) | AAR S-4240 | 2007 | ECP Brake Equipment—Approval Procedures | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.603(d)(1) | AAR S-469-47 | 1999 | Performance Specification for Freight Brakes | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 232.607(e)(2)(i) | AAR S-4200 | 2008 | Electronically Controlled Pneumatic (ECP) Cable-Based Brake Systems—Performance Requirements | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 234.275(d)(1) | FHWA Publication | 2000 | Manual on Uniform Traffic Control Devices (MUTCD), 2000 Millennium Edition, including Errata #1 | Federal Highway Administration, U.S. Department of Transportation | |
| Federal Railroad Administration | 49 CFR 234.5 Appropriately equipped flagger | FHWA Publication | 2012 | Manual on Uniform Traffic Control Devices for Streets and Highways (MUTCD), Part IV | Federal Highway Administration, U.S. Department of Transportation | |
| Federal Railroad Administration | 49 CFR 235.12(b) | AAR Publication | 2013 | Graphic Symbols | Association of American Railroads | |
| Federal Railroad Administration | 49 CFR 236.909(d)(3)(i) | AREMA Manual | 2005 | Communications and Signal Manual, Part 17.3.5, Recommended Procedure for Hazard Identification and Management of Vital Electronic/Software-Based Equipment Used in Signal and Train Control Applications | American Railway Engineering and Maintenance of Way Association | |
| Federal Railroad Administration | 49 CFR 236.909(d)(3)(i) | AREMA Manual | 2005 | AREMA Communications and Signal Manual, Volume 4, Section 17—Quality Principles | American Railway Engineering and Maintenance of Way Association | |
| Federal Railroad Administration | 49 CFR 236.909(d)(3)(ii)(A) | AREMA Manual | 2005 | Communications and Signal Manual, Part 17.3.1, Communications and Signal Manual of Recommended Practices, Recommended Safety Assurance Program for Electronic/Software Based Products Used in Vital Signal Applications | American Railway Engineering and Maintenance of Way Association | |
| Federal Railroad Administration | 49 CFR 236.909(d)(3)(ii)(B) | AREMA Manual | 2005 | Communications and Signal Manual, Part 17.3.3, Communications and Signal Manual of Recommended Practices, Recommended Practice for Hardware Analysis for Vital Electronic/Software-Based Equipment Used in Signal and Train Control Applications | American Railway Engineering and Maintenance of Way Association | |
| Federal Railroad Administration | 49 CFR 236.909(d)(3)(ii)(C) | AREMA Manual | 2005 | Communications and Signal Manual, Part 17.3.5, Communications and Signal Manual of Recommended Practices | American Railway Engineering and Maintenance of Way Association | |
| Federal Railroad Administration | 49 CFR 237 Appendix A 1(b) | AREMA Manual | 2005 | Manual for Railway Engineering | American Railway Engineering and Maintenance of Way Association | |
| Federal Railroad Administration | 49 CFR 237 Appendix A 5(b) | AREMA Manual | 2005 | Manual for Railway Engineering | American Railway Engineering and Maintenance of Way Association | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (a)(1)(i) | ASTM C 1166 | 2000 | Standard Test Method for Flame Propagation of Defense and Cellular Elastomeric Gaskets and Accessories | ASTM International | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (a)(1)(ii) | ASTM D 2724 | 1987 | Standard Test Method for Bonded, Fused, and Laminated Apparel Fabrics | ASTM International | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (a)(1)(iii) | ASTM D 3574 | 1995 | Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams | ASTM International | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (a)(1)(iv) | ASTM D 3675 | 1998 | Standard Test Method for Surface Flammability of Flexible Cellular Materials Using Radian Heat Energy Source | ASTM International | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (a)(1)(ix) | ASTM E 1354 | 1999 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter | ASTM International | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (a)(1)(v) | ASTM E 119 | 2000 | Standard Test Methods for Fire Tests of Building Construction and Materials | ASTM International | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (a)(1)(vi) | ASTM E 162 | 1998 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source | ASTM International | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (a)(1)(vii) | ASTM E 648 | 2000 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source | ASTM International | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (a)(1)(viii) | ASTM E 662 | 2001 | Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials | ASTM International | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (a)(1)(x) | ASTM E 1537 | 1999 | Standard Test Method for Fire Testing of Upholstered Seating Furniture | ASTM International | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (a)(1)(xi) | ASTM E 1590 | 2001 | Standard Test Method for Fire Testing of Mattresses | ASTM International | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (a)(2) | Federal Standard 191A | 1978 | Textile Test Method 5830, Leaching Resistance of Cloth: Standard Method | Federal Specifications Standards and Test Methods | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (a)(3)(i) | California State Technical Bulletin 129 | 1992 | Flammability Test Procedure for Mattresses for Use in Public Buildings | State of California, Department of Consumer Affairs | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (a)(3)(ii) | California State Technical Bulletin 133 | 1991 | Flammability Test Procedure for Seating Furniture for Use in Public Occupancies | State of California, Department of Consumer Affairs | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (b) Average Heat Release Rate | ASTM E 1354 | 1999 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter | ASTM International | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (b) Critical Radiant Flux | ASTM E 648 | 2000 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source | ASTM International | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (b) Flame Spread Index | ASTM E 162 | 1998 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source | ASTM International | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (b) Heat Release Rate | ASTM E 1354 | 1999 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter | ASTM International |