This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(b)(25)(i) | NCASI Technical Bulletin 253 | 1971 | An Investigation of Improved Procedures for Measurement of Mill Effluent and Receiving Water Color | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | USGS I-3271-85 | 1971 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-21 | 1971 | Airport Miscellaneous Lighting Visual Aids | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.023-4(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(10) | ANSI B114.1 | 1971 | Emblem for Identifying Slow Moving Vehicles | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(9) | SAE J-320a | 1971 | Minimum Performance Criteria for Roll-Over Protective Structure for Rubber-Tired, Self-Propelled Scrapers | Society of Automotive Engineers | |
Nuclear Regulatory Commission | 10 CFR 73.26(l)(1) | ANSI MH5.1 | 1971 | Basic Requirements for Cargo Containers | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(17) | ANSI J6.1 | 1971 | Rubber Insulating Line Hose | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.268(n)(11)(iv) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(13) | ASTM D 484 | 1971 | Standard Specification for Hydrocarbon Drycleaning Solvents | ASTM International | |
Environmental Protection Agency | 40 CFR 61.18(a)(10) | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-44A | 1971 | Specification for L-858 Retroreflective Taxiway Guidance Sign | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.900(k)(5) | IME Publication 20 | 1971 | Radio Frequency Energy—A Potential Hazard in the Use of Electric Blasting Caps | Institute of Makers of Explosives | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-21 | 1971 | Airport Miscellaneous Lighting Visual Aids | Federal Aviation Administration, U.S. Department of Transportation | |
Consumer Product Safety Commission | 16 CFR 1402.4(a)(1)(i)(E)(1) | ANSI Z53.1 | 1971 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-26A | 1971 | Specification for L-823 Plug and Receptacle, Cable Connectors (Through change 1, 1971) | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(18) | ANSI J6.2 | 1971 | Rubber Insulating Hoods | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 25, Section 7.1.3 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-P-791B | 1971 | Putty | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60.58a(h)(6)(ii) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-5A | 1971 | Segmented Circle Airport Marker System | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.1001(h) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(B) | EPA Method 130.1 | 1971 | Hardness, Total (mg/L as CaCO3), Colorimetric, Automated EDTA | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.171-17(o) | Federal Standard 191A | 1971 | Textile Test Methods, Method 5304.1, Abrasion Reistance of Cloth, Oscillatory Cylinder (Wyzenbek) Method | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 49 CFR 571.301 S7.1.1 | ASTM D 484 | 1971 | Standard Specifications for Hydrocarbon Dry Cleaning Solvent | ASTM International | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-22 | 1971 | Maintenance Guide for Determining Degradation and Cleaning of Centerline and Touchdown Zone Lights (1971, change 1, 1976) | Federal Aviation Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 51c.503(a)(7)(iii)(A) | ANSI A117.1 | 1971 | Providing Accessibility and Usability for Physically Handicapped People | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(Q) | EPA Method 352.1 | 1971 | Nitrogen, Nitrate, Colorimetric, Brucine | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.1851(b)(1) | OKUIC regulations | 1971 | Oklahoma Statutes, title 17 sections 51-53; title 52 sections 86.1-86.5, 139-153, 243, 307-318.1 | State of Oklahoma | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (57) | EPA Method 160.4 | 1971 | Residue, Volatile (Gravimetric, Ignition at 550 degrees C) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(10) | ASAE S276.2 | 1971 | Emblem for Identifying Slow Moving Vehicles | American Society of Agricultural Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-26A | 1971 | Specification for L-823 Plug and Receptacle, Cable Connectors (Through change 1, 1971) | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | EPA Method 213.1 | 1971 | Cadmium (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(19) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Coast Guard | 46 CFR 160.040-2(c) | MIL-R-45505 | 1971 | Line Throwing Apparatuses, Rocket and Projectile Units | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(12) | SAE J-394 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.58b(i)(6)(ii) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-5A | 1971 | Segmented Circle Airport Marker System | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 60.17(f)(1) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.023-1(a)(1) | MIL-S-18655C | 1971 | Signal, Smoke and Illumination, Marine, Mark 13, Mod 0. | U.S. Department of Defense | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-22 | 1971 | Maintenance Guide for Determining Degradation and Cleaning of Centerline and Touchdown Zone Lights (1971, change 1, 1976) | Federal Aviation Administration, U.S. Department of Transportation | |
Mine Safety and Health Administration | 30 CFR 75.1107-13(b) | NFPA 22 | 1971 | Standard for Water Tanks for Private Fire Protection | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.179(a)(43) Note | ANSI B30.9 | 1971 | Safety Code for Slings | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5335-3 | 1971 | Airport Design Standards--Airports Served by Air Carriers--Bridges and Tunnels on Airports | Federal Aviation Administration, U.S. Department of Transportation | |
Rural Utilities Service | 7 CFR 1755.97(b)(3) | RUS Bulletin 345-54, PE-52 | 1971 | Specification for Telephone Cable Splicing Connectors | Rural Utilities Service, U.S. Department of Agriculture | |
Occupational Safety and Health Administration | 29 CFR 1910.268(i)(1) | ANSI Z89.2 | 1971 | Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-429f | 1971 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(20) | ANSI J6.5 | 1971 | Rubber Insulating Sleeves | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec L-F-1641 | 1971 | Floor Covering, Translucent or Transparent Vinyl Surface with Backing | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60.1320(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers |