This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 440 Appendix A | FedSpec HH-I-1972/4 | 1981 | Gypsum Board and Polyurethane or Polisocyanurate Composite Board | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.055-3(b) | 46 CFR 164.015 | 2012 | Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shapes | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.135-13(g)(1) | IMO MSC/Circular 980 | 2001 | Standardized Life-saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.180(a)(1) | NHTSA Publication | 2009 | Parts/Drawings List, Part 572 Subpart U, Eurosid 2 with Rib Extensions (ES2re) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(1)(i)(G) | EPA-600-8-78-017 | 1978 | Microbiological Methods for Monitoring the Environment, Water, and Wastes, Part III Analytical Methodology, Section D Fecal Streptococci, 4 Most Probable Number Method, page 139 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.626(c)(3)(ii)(D) | AFPC Book of Methods | 1991 | Section IX, Methods of Analysis For Phosphate Rock, No. 3 Phosphorus—P2O5 or Ca3(PO4)2, Method C—Spectrophotometric Method | Association of Florida Phosphate Chemists | |
Coast Guard | 46 CFR 58.05-1(b) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels, Part 4 Vessel Systems and Machinery | American Bureau of Shipping | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7420 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(12) | API RP 2SM | 2001 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 63.99(a)(31)(i) | NJ State Regulations | 1998 | Toxic Catastrophe Prevention Act Program | State of New Jersey | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(15) | NFPA 68 | 1954 | Guide for Explosion Venting | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 26.60(b) | ISO Guide 2 | 1996 | Standardization and Related Activities-General Vocabulary of the ISO and IEC | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(3)(ii) | ANSI A13.1 | 1956 | Scheme for Identification of Piping Systems | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 80.46(a)(3) | ASTM D 5453 | 2012 | Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(63) | ASTM D 1552 | 2003 | Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method) | ASTM International | |
Coast Guard | 7 CFR 1728.201(j)(4) | AWPA A7 | 1975 | Standard Wet Ashing Procedure for Preparing Wood for Chemical Analysis | American Wood Protection Association | |
Coast Guard | 46 CFR 98.25-97(c)(2) | ASNT RP SNT-TC-1A | 1988 | Personnel Qualification and Certification for Nondestructive Testing | American Society for Nondestructive Testing | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S3 Plan view (a) | SAE J-903a | 1966 | Passenger Car Windshield Wiper Systems | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (45) | USGS O-2060-01 | 2001 | Pesticides in Water by SPE and HPLC-MS. Official Name: Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by Graphitized Carbon-Based Solid-Phase Extraction and HPLC-MS | U.S. Geological Survey | |
Coast Guard | 21 CFR 136.110(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 180.209(m) | CGA C-6.1 | 1995 | Standard for Visual Inspection of High Pressure Aluminum Compressed Gas Cylinders | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | ASTM D 3559C | 2008 | Standard Test Methods for Lead in Water, Differential Pulse Anodic Stripping Voltammetry | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(d)(7) | ASME MFC-11M | 2006 | Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.703(g)(5)(ii) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Energy Department | 10 CFR 434.701.1 RS-44 | NEMA MG-11 | 1993 | Energy Management Guide for Selection and Use of Single-Phase Motors (RS-44) | National Electrical Manufacturers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.75(d)(3)(ii) | ISO 11120 | 1999 | Gas cylinders--Refillable seamless steel tubes of water capacity between 150 L and 3000 L--Design, construction and testing | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(2) | API 12A | 1951 | Specification for Oil Storage Tanks with Riveted Shells, Seventh Edition | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (49) | APHA Method 6420 B | 2000 | Phenols by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 2459 | 1972 | Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis | ASTM International | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.2 | ASME A18.1 | 2003 | Safety Standard for Platform Lifts and Stairway Chairlifts | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 102.23(c)(4) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 147.2251(a)(1) | UTUIC regulations | 1990 | Utah Code Annotated, 1953, section 40-6-1 through 40-6-18, as amended 1988 and Cumm. Supp. 1990 | State of Utah | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 4, (3)(b) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 183.610(b) | UL 1128 | 1997 | Marine Blowers | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(54) | ANSI Z12.20 | 1969 | Code for the Prevention of Dust Explosions in Woodworking and Wood Flour Manufacturing Plants | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3280.707(d)(1) | ANSI C72.1 | 1972 | Household Automatic Electric Storage Type Water Heaters | American National Standards Institute | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(13)(i) | EPA-600-4-79-020 | 1983 | Method 279.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Minerals Management Service | 30 CFR 250.1628(b)(3) | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
Coast Guard | 46 CFR 160.051-7(g) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Research and Special Programs Administration | 49 CFR 172.102(c)(1) 163 | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Coast Guard | 46 CFR 52.01-120(c)(3) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (42) | APHA Method 5310 D | 2000 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 52.741(x)(3)(ii) | 35 I.A.C. 215 | 1989 | Administrative Code, Section 215.301 | State of Illinois | |
Environmental Protection Agency | 40 CFR 89.207(a) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Environmental Protection Agency | 40 CFR 61.18(e)(1)(ii) | NH State Regulations, Env-A 1800 | 2008 | Asbestos Management and Control, Sections 1801-1807, excluding the following: 1801.02(e), 1802.02, 1802.04, 1802.07-1802.09, 1802.13, 1802.15-1802.17, 1802.28-1802.29, 1802.36, 1802.42, 1802.45, 1802.50, 1802.54, 1804.05-1804.09, and 1807.02 | State of New Hampshire | |
Research and Special Programs Administration | 49 CFR 195.106(e) | ASTM A 671 | 2004 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures | ASTM International | |
Coast Guard | 46 CFR 58.03-1(j)(2) | SAE J-429 | 1983 | Mechanical and Material Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.151-15(e) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1043.41(h)(2) | IMO Publication | 2008 | NOX Technical Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(Z) | EPA Method 1660 | 1993 | Pyrethrins and Pyrethroids by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency |