This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 40 CFR 1065.705 Table 1 | ISO 10307-2 | 2009 | Petroleum products--Total sediment in residual fuel oils--Part 2: Determination using standard procedures for ageing | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.109(i)(1)(iii)(C) | NFPA 203M | 1970 | Manual on Roof Coverings | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.110(i)(3)(ii) | NFPA 58 | 2011 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.269(v)(5) Note (1) | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1917.3(b)(7) | ANSI/ASSE Z87.1 | 1998 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(4) | ANSI Z53.1 | 1967 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(c)(14)(ii) | IME Pamphlet No. 17 | 1960 | Safety in the Handling and Use of Explosives | Institute of Makers of Explosives | |
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | SAE J-386 | 1969 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM D 149 | 2013 | Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.268(n)(11)(v) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.552(d) | ANSI A17.1c | 1969 | Safety Code for Elevators, Dumbwaiters and Moving Walks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(6) | ANSI A13.1 | 1956 | Scheme for the Identification of Piping Systems | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(64) | ANSI Z49.1 | 1967 | Safety in Welding and Cutting | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1918.101(a)(1)(i)(C) | ANSI Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 36 | 2004 | Solvent Extraction Plants | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1918.104(b)(2) | ANSI/NSC Z41 | 1999 | Protective Footwear | National Safety Council | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(3)(i) | 29 CFR 1910.107(b)(9) | 2014 | Spray finishing using flammable and combustible materials; Spray booths | U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(9) | SAE J-320a | 1971 | Minimum Performance Criteria for Roll-Over Protective Structure for Rubber-Tired, Self-Propelled Scrapers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1440(c)(9) | ASME B30.14, Section 14-2.2.2 | 2004 | Side Boom Tractors, Testing—Rated Load Test | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.272 Appendix B | ANSI/NFPA 66 | 2014 | Pneumatic conveying systems for agricultural commodities | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(2)(iv)(B)(1) | API 2000 | 1968 | Venting Atmospheric and Low-Pressure Storage Tanks | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(f)(4) | API 12F | 1961 | Specification for Small Welded Production Tanks | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(23) | ASTM D 1692 | 1968 | Test for Flammability of Plastic Sheeting and Cellular Plastics | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.94(a)(2)(iii) | ANSI Z33.1 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(i)(A) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(5) | CGA G-8.1 | 1964 | Standard for the Installation of Nitrous Oxide Systems at Consumer Sites | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(10)(iv), Table H-26 | ASME B&PV Code | 1956 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1917.91(a)(1)(ii) | ANSI/ISEA Z87.1 | 2003 | Practice for Occupational and Educational Eye and Face Protection | International Safety Equipment Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(29) | NFPA 385 | 1966 | Recommended Regulatory Standard for tank Vehicles for Flammable and Combustible Liquids | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(7)(vi) | ASTM A 395 | 1968 | Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1797 | 2009 | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.180(e)(2)(iii)(A) | SAE J-765 | 1961 | Recommended Practice for Crane Loading Stability Test Code | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 496 | 2003 | Purged and Pressurized Enclosures for Electrical Equipment | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(11)(i) | ANSI A17.1 | 1965 | Safety Code for Elevators, Dumbwaiters and Moving Walks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(17)(i) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessels with Addenda | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.67(c)(5)(iv) | AWS D2.0 | 1969 | Specifications for Welding Highway and Railway Bridges | American Welding Society | |
Occupational Safety and Health Administration | 29 CFR 1926.603(a)(1) | ASME B&PV Code | 1968 | Power Boilers, Section I | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1915.505(e)(7)(i) | NFPA 1983 | 2001 | Standard on Fire Service Life Safety Rope and System Components | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.1001(h) | SAE J-394 | 1969 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.156 | ANSI/NFPA 1972 | 1972 | Standard on Helmets for Structural Fire Fighting | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.94(a)(5)(iv) | 29 CFR 1910.134 | 2014 | Respiratory Protection | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(17) | ANSI J6.1 | 1971 | Rubber Insulating Line Hose | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1 and Zone 2 | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.57(f)(2)(iii) | NFPA 68 | 1954 | Guide for Explosion Venting | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926 Subpart L Appendix A (1)(b)(i) | ANSI A10.8 | 1988 | Scaffolding-Safety Requirements | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | IEEE 4 | 1995 | Techniques for High-Voltage Testing | Institute of Electrical and Electronics Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 20 | 2003 | Installation of Stationary Pumps for Fire Protection | U.S. Department of Housing and Urban Development | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(3) | API 12B | 1958 | Specification for Bolted Production Tanks | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(8)(ii) | ASTM B 210 | 1968 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(t)(2) | USPHS Publication 934 | 1962 | Food Service Sanitation Ordinance and Code, Part V of the Food Service Sanitation Manual | U.S. Public Health Service, U.S. Department of Health and Human Services |