This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (19) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 177.1550(d)(2)(i) | ASTM D 1238 | 1982 | Standard Method of Measuring Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (16) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (44) | EPA Method 604 | 1982 | Phenols by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (32) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (100) | EPA Method 604 | 1982 | Phenols by GC/FID | U.S. Environmental Protection Agency | |
Coast Guard | 21 CFR 177.1350(b)(2) | ASTM D 1238 | 1982 | Standard Method of Measuring Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (11) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 178.3690(b)(1) | ASTM D 566 | 1982 | Standard Test Method for Dropping Point of Lubricating Grease | ASTM International | |
Environmental Protection Agency | 40 CFR 141.25(a) Table Note 9 | RSILR Publication | 1982 | Determination of Ra-226 and Ra-228 (Ra-02) | State of New York (NY) | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-530B | 1982 | Insulation Board, Thermal, Unfaced, Polyurethane or Polyisocyanurate | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (64) | EPA Method 120.1 | 1982 | Conductance (Specific Conductance, umhos at 25 degrees C) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (3) | EPA Method 603 | 1982 | Acrolein and Acrylonitrile by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC Footnote 5 | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (104) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 300.915(a)(11)(iii) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 176.170(b)(2) | ASTM D 1238 | 1982 | Standard Method of Measuring Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Environmental Protection Agency | 40 CFR 260.11(b)(2) | ASTM D 1946 | 1982 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (25) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (51) | EPA Method 606 | 1982 | Phthalate Esters by GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (51) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (74) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.2500(a)(3) | WIUIC regulations | 1982 | Chapter NR 113, Servicing Septic Tanks, Seepage Pits, Grease Traps or Privies, Wisconsin Administrative Code §§ NR 113.07-113.08 (1979), as amended by Natural Resources Board Order No. WQ-25-82. | State of Wisconsin | |
Environmental Protection Agency | 40 CFR 300.915(c)(11) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 178.3870(f)(3) | ASTM D 465 | 1982 | Standard Test Method of Test for Acid Number of Rosin | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(e) | ASTM E 871 | 1982 | Standard Method of Moisture Analysis of Particulate Wood Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (41) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (55) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (77) | EPA Method 604 | 1982 | Phenols by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (5) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 971 | 1982 | Duct-work Insulation | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (44) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 79a | 1982 | Acrylonitrile Butadiene Styrene (ABS) and Poly Vinyl Chloride (PVC) Plastic Drain, Waste and Vent Pipe and Fittings | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (59) | EPA Method 610 (HPLC) | 1982 | Polynuclear Hydrocarbons by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (80) | EPA Method 604 | 1982 | Phenols by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (100) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 763 Appendix A (II)(J)(3) | N.B.S. Special Publication 619 | 1982 | Asbestos Standards: Materials and Analytical Methods, Small, John and E. Steel | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (1) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (47) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC Footnote 5 | EPA Method 605 | 1982 | Benzidines by HPLC | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (104) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 300.915(a)(11)(iii) Footnote 2 | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 176.170(b)(2) | ASTM D 2503 | 1982 | Standard Method of Test for Molecular Weight of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (10) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (10) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (37) | EPA Method 602 | 1982 | Purgeable Aromatics by GC/PID Purge & Trap | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 164.023-5 Table 164.023-5(a) | MIL-T-43624A | 1982 | Thread, Polyester, Spun | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 147.500(b)(2) | FLUIC regulations | 1982 | Florida Administrative Code, Chapter 17-1 (1982) (Administrative Procedures Act) | State of Florida | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (25) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (74) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency |