This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation Sort descending | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 434.701.1 RS-42 | ANSI Z21.66 | 1996 | Automatic Vent Damper Devices for Use with Gas-Fired Appliances (RS-42) | American National Standards Institute | |
Energy Department | 10 CFR 434.701.1 RS-43 | NEMA MG-10 | 1994 | Energy Management Guide for Selection and Use of Polyphase Motors (RS-43) | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 434.701.1 RS-44 | NEMA MG-11 | 1993 | Energy Management Guide for Selection and Use of Single-Phase Motors (RS-44) | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 434.701.1 RS-45 | ARI 330 | 1993 | Ground-Source Closed-Loop Heat Pumps (RS-45) | Air Conditioning and Refrigeration Institute | |
Energy Department | 10 CFR 434.701.1 RS-46 | ARI 560 | 1992 | Absorption Water-Chilling and Water Heating Packages (RS-46) | Air Conditioning and Refrigeration Institute | |
Energy Department | 10 CFR 434.701.1 RS-47 | ASHRAE Handbook | 1995 | HVAC Systems and Applications (RS-47) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Energy Department | 10 CFR 434.701.1 RS-5 | ASTM C 177 | 1993 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (RS-5) | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-6 | ASTM C 518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus (RS-6) | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-7 | ASTM C 236 | 1993 | Standard Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-8 | ASTM C 976 | 1990 | Standard Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box (RS-8) | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-9 | LTH Report TVAHB-3007 | 1981 | Thermal Bridges in Sheet Metal Construction (RS-9) | Lund Institute of Technology | |
Energy Department | 87 FR 19595 | 10 CFR 435 | ICC 2021 | 2021 | Energy Efficiency Standards for the Design and Construction of New Federal Low-Rise Residential Buildings Baseline Standards Update | International Energy Conservation Council |
Energy Department | 10 CFR 435.2 | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.2 | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.3(b)(1) | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.3(b)(2) | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.4(a)(1)(i) | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.4(a)(1)(ii) | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.4(a)(2)(i) | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.4(a)(2)(ii) | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.5(a) | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.5(b) | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Energy Department | 10 CFR 440 Appendix A | NWWDA I.S. 1 | 1987 | Industry Standard for Wood Flush Doors | National Wood Window and Door Association | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 971 | 1982 | Duct-work Insulation | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 834 | 1986 | Latex Sealing Compounds | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 720 | 1989 | Spray Applied Fibrous Insulation for Elevated Temperature | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 892 | 1989 | High-temperature Fiber Blanket Insulation | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 755 | 1990 | Standard Recommended Practice for Selection for Vapor Barriers for Thermal Insulation | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASME B&PV Code | 1988 | Boiler and Pressure Vessel Code, Section V | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | AAMA 1102.7 | 1989 | Voluntary Specifications for Aluminum Storm Doors | American Architectural Manufacturers Association | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 755 | 1990 | Standard Recommended Practice for Selection for Vapor Barriers for Thermal Insulation | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ANSI Z21.47 | 1988 | Gas-Fired Central Furnaces | American National Standards Institute | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 612 | 1983 | Block and Board Insulation | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | NEMA DC-3 | 1989 | Thermostats | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 728 | 1989 | Standard Specification for Perlite Insulation Board | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 920 | 1987 | Standard Specification for Elastomeric Joint Sealants | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASME B&PV Code | 1988 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | NWWDA I.S. 6 | 1986 | Industry Standard for Wood Stile and Rail Doors | National Wood Window and Door Association | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 764 | 1988 | Insulation, Loose-Fill Mineral Fiber | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASME CSD-1 | 1988 | Controls and Safety Devices for Automatically Fired Boilers | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 591 | 1985 | Rigid Preformed Polyurethane Insulation Board | ASTM International | |
Research and Special Programs Administration | 10 CFR 440 Appendix A | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | ANSI Z223.1 | 1988 | National Fuel Gas Code | American National Standards Institute | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 984 | 1983 | Perlite Board and Rigid Cellular Polyurethane Composite Roof Insulation | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 726 | 1988 | Standard Specification for Mineral Fiber and Roof Insulating Board | ASTM International | |
Research and Special Programs Administration | 10 CFR 440 Appendix A | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | UL 1995 | 1990 | Cooling equipment: Including evaporative coolers, heat pumps and other equipment | Underwriters Laboratories, Inc. | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 726 | 1988 | Standard Specification for Mineral Fiber and Roof Insulating Board | ASTM International | |
Coast Guard | 10 CFR 440 Appendix A | NWWDA I.S. 3 | 1988 | Industry Standard for Wood Sliding Patio Doors | National Wood Window and Door Association | |
Energy Department | 10 CFR 440 Appendix A | ASME B&PV Code | 1988 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers |