This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Rural Utilities Service | 7 CFR 1728.97(e)(7) | AWPA A9 | 2001 | Standard Method for Analysis of Treated Wood and Treating Solutions By X-Ray Spectroscopy | American Wood Protection Association | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(F)(21) | EPA-600-R-95-131 | 1995 | Method 506, Rev. 1.1—Determination of phthalate and adipate esters in drinking water by liquid/liquid extraction or liquid/solid extraction and gas chromatography with photoionization detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (64) | AOAC Method 973.40 | 1998 | Specific conductance of water | AOAC International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 13 | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41c Residual oil | ASTM D 396 | 1978 | Standard Specification for Fuel Oils | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(f)(5) | ANSI Z88.2 | 1969 | Respiratory Protection | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 98.7(m)(1) | EPA 305-X-04-001 | 2004 | NPDES Compliance Inspection Manual, Chapter 5, Sampling | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.047-4(b) | Drawing No. 160.047-1, Sheet 1, Rev. 2 | 2012 | Buoyant Vest, Kapok or Fibrous Glass, Adult and Child--Cutting Pattern and General Arrangement, Models AK-1, and AF-1 | U.S. Coast Guard | |
National Highway Traffic Safety Administration | 49 CFR 572.42(a) | Drawing No. SA-SID-M001A | 1994 | Completed Assembly Side Impact Dummy | Reprographic Technologies | |
Coast Guard | 46 CFR 175.540(d) | IMO Resolution A.741(18) | 1993 | International Management Code for the Safe Operation of Ships and for Pollution Prevention | International Maritime Organization | |
Coast Guard | 46 CFR 56.01-2(e)(9) | ASTM A 178/A 178M | 1995 | Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(f) | ASTM D 6721 | 2001 | Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry | ASTM International | |
Rural Utilities Service | 7 CFR 1755.506(z)(3)(i) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Health and Human Services Department | 45 CFR 162.1102(a)(3) | ASC X12N 837 | 2000 | Health Care Claim: Professional | Washington Publishing Company | |
Coast Guard | 46 CFR 160.133-7(b)(3) | ASTM A 276 | 2008 | Standard Specification for Stainless Steel Bars and Shapes | ASTM International | |
Coast Guard | 33 CFR 154.106(d)(5) | ASTM F 1155 | 1998 | Standard Practice for Selection and Application of Piping System Materials | ASTM International | |
Public Health Service | 42 CFR 51c.503(a)(7)(iii)(A) | ANSI A117.1 | 1971 | Providing Accessibility and Usability for Physically Handicapped People | American National Standards Institute | |
Coast Guard | 46 CFR 54.15-13(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(22) | ANSI B31.1 | 1955 | Code for Pressure Piping | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (6) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(13)(i)(N) | AOAC Method 973.52 | 1998 | Hardness of Water | AOAC International | |
Environmental Protection Agency | 40 CFR 799.5085(j) Table 3, C7 | ASTM E 729 | 1996 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians | ASTM International | |
Environmental Protection Agency | 40 CFR 98.254(d)(3) | ASTM D 1946 | 2006 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 56.01-2(d)(9) | ASME B16.10 | 2000 | Face-to-Face and End-to-End Dimensions of Valves | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.136(b)(1) | Drawing No. 880105-651 | 1987 | Foot assembly | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1.1(d) | ASTM D 362 | 1984 | Standard Specification for Industrial Grade Toluene | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Ethalfluralin) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 266, Appendix IX, 2.1.11(4) | EPA-600-S4-83-013 | 1982 | Performance Test Results and Comparative Data for Designated Reference Methods for Carbon Monoxide | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.1625(d)(1)(iv) | ASTM D 7520 | 2013 | Standard Test Method for Determining the Opacity in a Plume in an Outdoor Ambient Atmosphere | ASTM International | |
National Oceanic and Atmospheric Administration | 50 CFR 226.210 | USGS Publication | 1974 | 1:500,000 Scale Hydrologic Unit Maps for the State of Oregon | U.S. Geological Survey | |
Coast Guard | 46 CFR 110.10-1(g)(5) | IEC 60332-3-22 | 2000 | Tests on Electric Cables Under Fire Conditions—Part 3-22: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables—Category A, First Edition | International Electrotechnical Commission | |
Research and Special Programs Administration | 49 CFR 179.200-7(f) Table | ASTM A 302/A 302M | 1993 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum Nickel | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C 208 | 1982 | Insulating Board (Cellulosic Fiber), Structural and Decorative | ASTM International | |
Environmental Protection Agency | 40 CFR 75.6(b)(6) | ASME MFC-9M | 1988 | Measurement of Liquid Flow in Closed Conduits by Weighing Method | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(f) | ASTM E 776 | 1987 | Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 73 App. B, I B 1 b 2 a | ANSI S3.6 | 1973 | Specifications for Audiometers | American National Standards Institute | |
Occupational Safety and Health Administration | 14 CFR 25.5(b)(1) | DOT/FAA/AR-05/8 | 2008 | Fuel Tank Flammability Assessment Method User's Manual | Federal Aviation Administration, U.S. Department of Transportation | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM A 621/A 621M | 1992 | Standard Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled, Drawing Quality | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(a)(8)(ii) | ASTM D 2879 | 1986 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(51) | ASTM D 1137 | 1975 | Standard Method for Analysis of Natural Gases and Related Types of Gaseous Mixtures by the Mass Spectrometer | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(F)(12) | EPA Method 515.1 | 1991 | Determination of Chlorinated Acids in Water by Gas Chromatography with an Electron Capture Detector | U.S. Environmental Protection Agency | |
Federal Railroad Administration | 49 CFR 229 Appendix F Verification Guidance (a)(2)(i) | EN50126:/IEC 62278 | 2002 | Railway Applications: Communications, Signaling, and Processing Systems Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) | European Standards | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (11) | USGS O-3104-83 | 1983 | Whole-water recoverable organophosphate pesticides | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.852(a)(5) Table | APHA Method 9223 B | 1998 | Enzyme Substrate Coliform Test, Enzyme Substrate Test | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(c) | EPA-821-R-01-013 | 2001 | Appendix to EPA Method 1631, Total Mercury in Tissue, Sludge, Sediment, and Soil by Acid Digestion and BrCl Oxidation | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.390(i)(4)(ii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Energy Department | 10 CFR 430 Subpart B, App. O, 2.3.4 | UL 730 | 1974 | Oil-Fired Wall Furnaces | Underwriters Laboratories, Inc. | |
Housing and Urban Development Department | 24 CFR 200.937(a)(1) | ANSI Z124.1 | 1980 | Plastic Bathtub Units | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200.937(b)(1)(i) | UM Bulletin 73A | 1978 | Plastic Bathtubs, Plastic Shower Stalls and Receptors, and Plastic Lavatories | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (7) | EPA Method 605 | 1982 | Benzidines by HPLC | U.S. Environmental Protection Agency |