This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(l)(1)(iii) | ISO 11119-3 | 2002 | Gas cylinders of composite construction--Specification and test methods--Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners | International Organization for Standardization | |
Coast Guard | 46 CFR 54.01-2(c) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(3) | Drawing No. 78051-218 | 1998 | Hybrid III Anthropomorphic Test Dummy, Revision U | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (46) | ASTM D 888C | 2009 | Standard Test Methods for Dissolved Oxygen in Water, Instrumental Probe Procedure—Luminescence-Based Sensor | ASTM International | |
Research and Special Programs Administration | 49 CFR 177.835(g)(3)(ii) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(1)(i) | EPA-600-4-79-020 | 1983 | Method 204.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.010-5(c)(1) | MIL-R-21607E(SH) | 1990 | Resins, Polyester, Low Pressure Laminating, Fire Retardant | U.S. Department of Defense | |
Coast Guard | 46 CFR 160.151-15(c) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(3) | ASTM D 130 | 2012 | Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) table IG Footnote 3 | EPA Method 1661 | 1992 | Bromoxynil by Direct Injection and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (9) | EPA Method 200.8 | 1994 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(13)(iii) | EPA-600-4-91-010 | 1991 | Method 200.9--Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Methanol) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.1050(a)(8) | MDUIC regulations | 1989 | Code of Maryland Regulations, Title 26, Subtitle 01, Chapter 04, promulgated and effective as of March 1, 1989 | State of Maryland | |
Environmental Protection Agency | 40 CFR 147.750(a)(1) | INUIC regulations | 1988 | Indiana Code, title 4, article 21.5, chapters 1 through 6 | State of Indiana | |
Environmental Protection Agency | 40 CFR 63.14(c)(2) | AOAC Method 929.02 | 1995 | Preparation of Fertilizer Sample, Sixteenth edition | AOAC International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-3, Method 5F, Section 7.2.1 | ASTM D 1193 | 1977 | Standard Specification for Reagent Water | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 2.2 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 761.71(b)(2)(vi) | ASTM D 2784 | 1989 | Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.100(b)(1) | Drawing No. 92041-002 | 1992 | Skull Assembly | Reprographic Technologies | |
Occupational Safety and Health Administration | 29 CFR 1910.262(w)(1) | ASME B&PV Code | 1968 | Code for Unfired Pressure Vessels, Section VIII, Unfired/Pressure Vessels | American Society of Mechanical Engineers | |
Minerals Management Service | 30 CFR 250.1904(b) | COS Safety Publication COS-2-03 | 2012 | Requirements for Third-party SEMS Auditing and Certification of Deepwater Operations, First Edition | Center for Offshore Safety | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Coast Guard | 46 CFR 97.15-55(a) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Veterans Affairs Department | 38 CFR 17.1(b)(7) | NFPA 25 | 2008 | Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 1060.810(c) Table 3 | California Code of Regulations | 2004 | Final Regulation Order, Article 1, Chapter 15, Division 3, Title 13 | California Air Resources Board | |
National Highway Traffic Safety Administration | 49 CFR 572.85(b)(1) | Drawing No. LP 1049-59 through LP1049-63 | 1979 | 9-month old Dummy Components and Parts for Head-Neck | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/BHMA A156.2 | 1989 | Standard for Bored and Preassembled Locks and Latches | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API MPMS | 1995 | Chapter 3, Section 4 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1902(c) | API RP 75 | 2008 | Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute | |
Veterans Affairs Department | 38 CFR 17.74(s) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 36 Appendix G G36.201(d)(1) | SAE ARP 866A | 1975 | Standard Values of Atmospheric Absorption as a function of Temperature and Humidity for use in Evaluating Aircraft Flyover Noise | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (99) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | ASTM D 1253 | 2003 | Standard Test Method for Residual Chlorine in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(14) | ASTM D 1945 | 2003 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(e)(2) | ASME BPVC III | 2016 | Boiler and Pressure Vessel Code, Section III, paragraph NCA-1140, Subsection NCA | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (63) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/Mass Spectrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 5 | USGS Open File Report (OFR) 93-125 | 1993 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Inorganic and Organic Constituents in Water and Fluvial Sediments | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 60.41c Distillate oil | ASTM D 396 | 1978 | Standard Specification for Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 98.344(b)(3) | ASTM D 1946 | 2006 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 60.41c Distillate oil | ASTM D 396 | 1998 | Standard Specification for Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 63.3521(b)(1) | ASTM D 2697 | 1986 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings | ASTM International | |
Coast Guard | 46 CFR 175.600(b) Table | NFPA 1963 | 1989 | Fire Hose Connections | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.2.1 | ANSI Z26.1a | 1980 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(c) | EPA SW-846-3050B | 1996 | Acid Digestion of Sediments, Sludges, and Soils, Revision 2 | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.901(e)(1) | TIA/EIA 455-3A, FOTP-3 | 1989 | Procedure to Measure Temperature Cycling on Optical Fibers, Optical Cable, and Other Passive Fiber Optic Components | Electronic Industries Association and/or Telecommunications Industry Association | |
Energy Department | 10 CFR 431.19(c)(4) | ISO/IEC Guide 25 | 1990 | General requirements for the competence of calibration and testing laboratories | International Organization for Standardization / International Electrotechnical Commission | |
Food and Drug Administration | 21 CFR 178.3530(a) | ASTM D 86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Coast Guard | 46 CFR 56.95-10(c)(5) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 111.105-1 | IEC 60079-11 | 1999 | Electrical Apparatus for Explosive Gas Atmospheres—Part 11: Intrinsic Safety “i”, Fourth Edition | International Electrotechnical Commission |