This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization Sort ascending |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 430 Subpart B, App. P, 4.3 | ANSI Z21.56 | 1994 | Gas-Fired Pool Heaters | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.153(n) | ANSI Z48.1 | 1954 | Method of Marking Portable Compressed Gas Containers To Identify the Material Contained | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3280.405(e)(1) | ANSI Z34.1 | 1993 | Certification, Third-Party Certification Program | American National Standards Institute | |
Federal Communications Commission | 47 CFR 15.31(a)(3) | ANSI C63.4 | 2003 | Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz | American National Standards Institute | |
Federal Railroad Administration | 49 CFR 227 Appendix B II | ANSI S12.6 | 2002 | Methods for Measuring the Real-Ear Attenuation of Hearing Protectors | American National Standards Institute | |
Coast Guard | 33 CFR 154.500(d)(2) | ANSI B16.24 | 1979 | Bronze Pipe Flanges and Flanged Fittings, Classes 150 and 300 | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.2.1 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Labor Department | 86 FR 54611 | 29 CFR 1915 | ANSI Z87.1-1989 (R-1998) | 1989 | Incorporation by Reference; Notice of Corrections | American National Standards Institute |
Environmental Protection Agency | 40 CFR 61.107(d)(2)(i) | ANSI/HPS N13.1 | 1999 | Sampling and Monitoring Releases of Airborne Radioactive Substances From the Stacks and Ducts of Nuclear Facilities | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 61.18(c)(2) | ANSI/HPS N13.1 | 1999 | Sampling and Monitoring Releases of Airborne Radioactive Substances From the Stacks and Ducts of Nuclear Facilities | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.136(b)(1)(ii) | ANSI Z41 | 1999 | Personal Protection-Protective Footwear | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.253(d)(4)(ii) | ANSI A13.1 | 1956 | Scheme for Identification of Piping Systems | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.602(c)(1)(vi) | ANSI B56.1 | 1969 | Safety Standard for Powered Industrial Trucks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.262(c)(7) | ANSI A13.1 | 1956 | Scheme for Identification of Piping Systems | American National Standards Institute | |
Coast Guard | 36 CFR 1235.4(e)(2) | ANSI X3.180 | 1990 | Magnetic Tape and Cartridge for Information Interchange - 18-Track, Parallel, 1/2-inch (12.65mm), 37 871 CPI (1491 cpmm), Group-Coded Requirements for Recording | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.522(a)(3) | ANSI S1.4 | 1983 | Specifications for Sound Level Meters | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 71.402(b) | ANSI A40.8 | 1955 | National Plumbing Code | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.95 Appendix I | ANSI S1.4 | 1976 | Specifications for Sound Level Meters | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.303(b)(1) | ANSI B7.1 | 1970 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. O, 2.4.2 | ANSI Z91.1 | 1972 | Performance Standards for Oil-Powered Central Furnaces | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(20) | ANSI J6.5 | 1971 | Rubber Insulating Sleeves | American National Standards Institute | |
Consumer Product Safety Commission | 16 CFR 1201.7(b)(2) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.57(f)(5)(v)(A) | ANSI Z41.1 | 1967 | Men's Safety-Toe Footwear | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.269(u)(5) Note | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(59) | ANSI Z35.1 | 1968 | Specifications for Accident Prevention Signs | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(1) | ANSI B30.5, 5-1.1.1 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Load Ratings—Where Stability Governs Lifting Performance”), paragraphs (a)-(d) (including subparagraphs) | American National Standards Institute | |
Energy Department | 10 CFR 430.2, Definitions, Cold temperature flouresent lamp | ANSI/IEC C78.81 | 2005 | American National Standard for Electric Lamps—Double-Capped Fluorescent Lamps—Dimensional and Electrical Characteristics | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.136(b)(2) | ANSI Z41 | 1999 | Personal Protection-Protective Footwear | American National Standards Institute | |
Energy Department | 87 FR 50396 | 10 CFR 429 | ANSI/ AMCA 230-15 Technical Errata 2021-05-05 | 2021 | Energy Conservation Program: Test Procedure for Ceiling Fans | American National Standards Institute |
Energy Department | 87 FR 53618 | 10 CFR 430 | ANSI C82.3-2016 | 2016 | Energy Conservation Program: Test Procedures for General Service Fluorescent Lamps, Incandescent Reflector Lamps, and General Service Incandescent Lamps | American National Standards Institute |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI Z34.1 | 1987 | Certification, Third-Party Certification Program | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.2.2 | ANSI Z26.1a | 1980 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Coast Guard | 46 CFR 154.1(b) | ANSI Z89.1 | 1969 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.2.11 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 178.360-4(a)(2) | ANSI B16.5 | 1977 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 86.1813-17(f)(1) | ANSI NGV1 | 2006 | Connection Devices, 2nd edition 2006 EPA/AP | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(71) | ANSI Z87.1 | 1989 | Practice of Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 10 CFR 430.2, Definitions, General service incandescent lamp (22) | ANSI C78.20 | 2003 | Electric Lamps--A, G, PS, and Similar Shapes with E26 Medium Screw Bases | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(3)(vii) | ANSI K13.1 | 1967 | Identification of Air-Purifying Respirator Canisters and Cartridges | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 61.93(c)(2)(i) | ANSI/HPS N13.1 | 1999 | Sampling and Monitoring Releases of Airborne Radioactive Substances From the Stacks and Ducts of Nuclear Facilities | American National Standards Institute | |
Minerals Management Service | 30 CFR 57.5037(a) | ANSI N13.8 | 1973 | Radiation Protection in Uranium Mines | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1917.119(c) | ANSI A14.1 | 1990 | Safety Requirements for Portable Wood Ladders | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(10) | ANSI A17.1a | 1967 | Safety Code for Elevators, Dumbwaiters, and Moving Walks | American National Standards Institute | |
Labor Department | 89 FR 99085 | 30 CFR 74 | ANSI/ISA 60079–25 | 2011 | Testing, Evaluation, and Approval of Electric Motor-Driven Mine Equipment and Accessories | American National Standards Institute |
Occupational Safety and Health Administration | 29 CFR 1926.552(d) | ANSI A17.1b | 1968 | Safety Code for Elevators, Dumbwaiters and Moving Walks | American National Standards Institute | |
Coast Guard | 33 CFR 155.140(b)(1) | ANSI A10.14 | 1991 | Requirements for Safety Belts, Harnesses, Lanyards, and Lifelines | American National Standards Institute | |
Environmental Protection Agency | 88 FR 10468 | 40 CFR 770 | ANSI A135.5-2012 | 2012 | Voluntary Consensus Standards Update; Formaldehyde Emission Standards for Composite Wood Products | American National Standards Institute |
Energy Department | 10 CFR 430.32(n)(2)(ii) | ANSI C78.3 | 1991 | American National Standard for Fluorescent Lamps-Instant-Start and Cold-Cathode Types-Dimensional and Electrical Characteristics | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 243.200-1(e) | ANSI Z245.60 | 1996 | Waste Containers—Compatibility Dimensions | American National Standards Institute | |
Energy Department | 10 CFR 434.701.1 RS-39 | ANSI Z21.10.3 | 1993 | Gas Water Heaters (RS-39) | American National Standards Institute |